NE18EE03C

C&K NE-18 Series Mains / Power Switches Features/Benefits • Chassis or panel mount • Various buttons • Various contact configurations • RoHS compliant Typical Applications • Mains/power switching • Consumer electronics • Audio equipment • Digital products A Pushbutton Specifications POWER CONTACT: SWITCHING POWER MAX. AC/DC: NE18: 1500/100 W, NE18CTII: 1000/100 W; AC (Inductive cos w =0.6): NE18: 900W, NE18CTII: 600W. SWITCHING VOLTAGE MAX. AC/DC: 250/100V SWITCHING CURRENT MAX. AC/DC AC (Inductive cos w =0.6): NE18: 6 A2)4)/1 A, NE18CTII: 4 A2)/1 A INRUSH CURRENT MAX. AC1): NE18: 36 A, NE18CTII: 64 A DIELECTRIC STRENGTH (50 Hz, 1 min.): 2000 V OPERATING LIFE AT MAX. LOAD AND AT MAX. INRUSH CURRENT: ^104 operations5) CONTACT RESISTANCE: Initial: 50mΩ; After 104 operations: 70mΩ. INSULATION RESISTANCE: ^1012 Ωchassis – nearest contact; ^1012 Ωmains contact – mains contact; ^1012 Ωmains contact – mains contact after 104 operations. LOW VOLTAGE CONTACT: SWITCHING POWER MAX.: 12W SWITCHING VOLTAGE MAX.: 24V NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models arer RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. SWITCHING CURRENT MAX.: 0.5A TOTAL TRAVEL: 4.7mm (.185 inch) LATCHING TRAVEL: 3.3mm (.130 inch) OPERATING FORCE: Without auxiliary low voltage contacts: NE18: 7N (700 grams); NE18CTII: 9.5N (950 grams). With auxiliary low voltage contacts: NE18: 8N (800 grams); NE18CTII: 11N (1100 grams). SEALING: Dust proof. Materials HOUSING, ACTUATOR & TERMINAL BOARD: Thermoplastic polyester (UL 94V-0). MOVABLE CONTACT: Silver nickel alloy, silver plated. FIXED CONTACTS: Silver nickel alloy, silver plated. COMMON CONTACTS & TERMINALS: Copper alloy, silver plated. RETURN SPRING: Music wire. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages A-100 thru A-106. For additional options not shown in catalog, consult Customer Service Center. If requesting only a switch, select the switch as noted below. Buttons are sold separately. Designation NE18 NE1B ZNE18 Cental mounted NE1B Contact Arrangement NE18 code # - see list Dress nut* *Central mounted ZNE18 series only (NONE) No dress nut B Black C Chrome Mechanical Function OA Momentary EE Alternate (push-push) Single Station Chassis 01 With .094 mounting holes (NONE) No chassis 02 With 4-40 tapped mounting holes 03 Special chassis (consult factory) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–99 www.ittcannon.com C&K NE-18 Series Mains / Power Switches A Pushbutton Order Code - Buttons Solid Buttons Mechanical Indicator Buttons Style F01 FMR F02 FG* F12 FSC F13 FSD F14 FU12 F15 FSB F16 FE F19 FA F21 F001 Button Color 01 Black 02 White 03 Red 04 Light gray Style F01 FA100 F02 FA101 F07 FA120 F08 FA2O1 F11 FA200* Shell Color 01 Black Out Position Color 01 Black In Position Color 02 White 06 Yellow 07 Blue 08 Green 12 Orange *Button options for central mounting configurations, use ‘FG’ for central mount with chrome dress nut, use ‘FA200’ for central mount with black dress nut. BUTTON REMOVAL A button of a push-push switch should only be removed in the “OFF” non-latching position. DESIGNATION & SWITCHES WITH STANDARD OPTIONS NE1838EE 0.494 (12,5) 0.394 (10) 0.583 (14,8) 0.7 (17,8) 1.09 (27,8) 0.335 (8,5) 0.406 (21,4) 0.13 (3,3) 0.394 (10) NE18 2U 0.494 (12,55) 0.197 (5) 0.394 (10) (A) (A) 0.236 (6) (R) (R) Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 0.709 (18) 0.315 (8) A–100 www.ittcannon.com 0.236 (6) P1 P2 1, 5 ±0 ,1 0.492 (12,5) C&K NE-18 Series Mains / Power Switches DESIGNATION & SWITCHES WITH STANDARD OPTIONS NE1839EE A Pushbutton PC MOUNTING NE1848EE 1.24 (31,5) 0.583 (14,8) 0.118 (3) 0.709 (18) 0.315 0.197 (5) (8) 0.157 (0,4) 1) 0.13 (3,3) 0.0512 (Ø1,3) 0.494 (12) 0.394 (10) 0.236 0.236 (6) (6) 0.118 (Ø3) 0.591 (15) 0.7 (17,8) 0.0394 (1) 0.236 0.236 (6) (6) 1) 2) 0.406 (21,4) 0.335 (8,5) Travel 3,4 (0.13) max. 4,7 (0.185) 1.09 (27,8) 0.7 (17,8) Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 0.236 (6,4) A–101 www.ittcannon.com A Pushbutton DESIGNATION & SWITCHES WITH STANDARD OPTIONS ZNE1838EECF0201 PC MOUNTING Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–102 www.ittcannon.com C&K NE-18 Series Mains / Power Switches CONTACT ARRANGEMENT A Pushbutton OPTION CODE Contact capacity and availability OPTION CODE Contact capacity and availability STYLE NE18 — 2AX NE18 — 2UX 2U + NE18 — 2AX NE18CTII — 2AX 2U + NE18 — 2UX NE18 — 2AP NE18 — 2UP NE18 — 2AW NE18 — 2UW NE18 — 2ASX ELECTRICAL CIRCUIT DPST DPDT DPST* DPST DPDT* DPST DPDT DPST DPDT DPST STYLE NE18 — 2USX NE18 — 2ASP NE18 — 2USP NE18 — 2ASW NE18 — 2USW 2U + NE18CTII — 2AX 2U + NE18 — 2AW 2U + NE18 — 2AP 2U + NE18 — 2UW 2U + NE18 — 2UP ELECTRICAL CIRCUIT DPDT DPST DPDT DPST DPDT DPST DPST DPST DPDT DPDT 37 38 51 52 (4A/64) 39 41 42 43 44 45 46 47 48 49 50 53 (4A/64) 54 55 56 57 * 2U + Denotes auxiliary set of low current contacts DPDT 2A = DPST 2U = DPDT S = Snap-in mounting X = Solder lug/PC pins W = Solder lugs only P = PC pins only NOTES 1. Contact plating is silver on all Power Switches. 2. The electrical function is Break Before Make (BBM) on all Power Switches. 3. The terminals will be epoxy sealed. POSSIBLE CONTACT ARRANGEMENT TYPE POWER CONTACTS1 AUXILIARY CONTACTS CONTACT SPACING > 3mm (.118 inch) PROTECTION CLASS (CEE 24) APPROVALS VDE, BSI, DEMKO, NEMKO, SEMKO, SEV, CSA, UL VDE, MEEI, BSI3, DEMKO, NEMKO, SEMKO, SEV, CSA, UL NE18 2A2 2U II NE18 2A2 2U 2U > 3mm (m) (.118 inch) I NE18CTII 2A2 2U > 3mm (.118 inch) II VDE, BSI, DEMKO, CSA, SEMKO, SEV, UL, NEMKO 1) A = make contact, R = break contact, U = changeover contact, m = VDE sign for switches with a contact spacing (air gap) < 3mm (.118 inch) according to VDE 0630/CEE 24. 2) With 2A mains contacts: Mounting only by PC pins is not sufficient. 3) BSI only for 2U mains contacts. MECHANICAL FUNCTION OPTION CODE FUNCTION Momentary Alternate (push-push) OA EE Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–102 www.ittcannon.com C&K NE-18 Series Mains / Power Switches A Pushbutton 01 WITH .094 MOUNTING HOLES SINGLE STATION CHASSIS (NONE) NO CHASSIS 02 WITH 4-40 TAPPED MOUNTING HOLES 03 SPECIAL CHASSIS (CONSULT FACTORY) DRESS NUT (NONE) NO DRESS NUT B BLACK C CHROME PANEL CUTOUT PANEL CUTOUT NOTE: Available with ZNE18 designation and FA200 buttons. NOTE: Available with ZNE18 designation and FG button. Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–103 www.ittcannon.com C&K NE-18 Series Mains / Power Switches SOLID BUTTON STYLE F01 FMR A Pushbutton F12 F02 FG FSC F13 FSD F14 FU12 F15 FSB F16 FE F19 FA OPTION CODE COLOR BLACK WHITE RED LT. GRAY 01 02 03 04 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–104 www.ittcannon.com C&K NE-18 Series Mains / Power Switches COLOR SOLID BUTTON STYLE A Pushbutton STYLE F21 F001 OPTION CODE COLOR BLACK WHITE RED LT. GRAY BLACK/CHROME (F03,F06 & F07 buttons only 01 02 03 04 09 SHELL COLOR IN POSITION COLOR MECHANICAL BUTTON STYLE OUT POSITION COLOR STYLE F01 FA100 F02 FA101 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–105 www.ittcannon.com C&K NE-18 Series Mains / Power Switches SHELL COLOR IN POSITION COLOR A Pushbutton STYLE F08 FA201 MECHANICAL BUTTON STYLE OUT POSITION COLOR F11 FA200 SHELL COLOR 01 BLACK IN POSITION COLOR OPTION CODE COLOR WHITE YELLOW BLUE GREEN ORANGE 02 OUT POSITION COLOR 01 BLACK 06 07 08 12 Third Angle Projection Dimensions are shown: Inches (mm) Specifications and dimensions subject to change A–106 www.ittcannon.com