ISI33.011AA01

Totalizers electronic Small impulse counters and position displays Display LCD, 8-digits ISI30, ISI31, ISI32, ISI33 Features – ISI30 - Impulse counter – ISI31 - Up/down, difference counter – ISI32 - Up/down counter – ISI33 - Position display ISI30 - Totalizer Technical data - electrical ratings Voltage supply Display Backlit Number of digits Display range Digit height Reset Keylock Emitted interference Interference immunity Programmable parameters Approvals ISI30 Function Count mode Control ISI31 Function Count modes Control ISI32 Function Count mode Control Counting with direction signal INP B and INP A (Up/Down) Pulses 10...260 VAC/VDC Counting with direction signal Difference counter INP A and INP B (up/down) INP A - INP B NPN, PNP, Pulses 10...260 VAC/VDC Fast and slow counting Adding or subtracting NPN, PNP, Floating contact, Pulses 10...260 VAC/VDC Lithium battery (approx. 8 years at 20 °C) LCD, 7-segment display 24 VDC ±20 %, 50 mA 8-digits -9999999...+99999999 8 mm Button and electric Yes, electric (keylock) DIN EN 61000-6-4 DIN EN 61000-6-2 Count mode UL/cUL, CE conform Technical data - electrical ratings ISI33 Function Count modes Control Position display A 90° B phase evaluation x1 A 90° B phase evaluation x2 NPN, PNP Technical data - mechanical design Operating temperature Storing temperature Relative humidity Core cross-section Protection DIN EN 60529 Housing type Housing colour Dimensions W x H x L Installation depth Mounting Cutout dimensions Weight approx. -10...+60 °C -20...+70 °C 80 % non-condensing 2.5 mm² fine wire AWG 12 IP 65 face with seal Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 Housing for control panel installation Deep grey, RAL 7021 48 x 24 x 48 mm 47.7 mm Clip frame or screw mount 25 x 50 mm (+0.5) 50 g 1 www.baumerivo.com www.baumerivo.com Small impulse counters and position displays Display LCD, 8-digits Totalizers electronic ISI30, ISI31, ISI32, ISI33 Type table ISI30 - Impulse counter Without backlit With backlit Version Brief description Signal input INP A ISI30.010AA01 ISI30.010AB01 NPN Fast and slow counting processes Fast counting NPN 7 kHz Slow counting NPN or floating contact 30 Hz Adding or subtracting ISI30.012AA01 ISI30.012AB01 PNP Fast and slow counting processes Fast counting PNP 12 kHz Slow counting NPN or floating contact 30 Hz Adding or subtracting ISI30.013AA01 ISI30.013AB01 AC/DC Slow counting processes Slow counting AC/DC 30 Hz External reset AC/DC – Adding Signal input INP B Operating mode ISI31 - Up/down counter / Difference counter Without backlit With backlit Version Brief description ISI31.010AA01 ISI31.010AB01 NPN ISI31.011AA01 ISI31.011AB01 PNP ISI31.013AA01 ISI31.013AB01 AC/DC Fast counting processes with Fast counting processes with Slow difference direction signal (Up/Down) or direction signal (Up/Down) or counting difference counting difference counting NPN, 7 kHz Counting with direction signal INP A - Counting input INP B - Direction signal Difference counting INP A - Adding INP B - Subtracting PNP, 12 kHz Counting with direction signal INP A - Counting input INP B - Direction signal Difference counting INP A - Adding INP B - Subtracting AC/DC, 30 Hz Difference counting INP A - Adding INP B - Subtracting Signal input INP A, INP B Operating mode ISI32 - Up/down counter / ISI33 - Position display Without backlit With backlit Version Brief description ISI32.013AA01 ISI32.013AB01 AC/DC Slow, directioncontrolled counting processes Direction signal AC/DC 30 Hz Direction signal AC/DC 30 Hz Counting with direction signal ISI33.010AA01 ISI33.010AB01 NPN For position display or lenght measurement in conjunction with an incremental encoder Counting input 0° NPN 3 kHz Counting input 90° out of phase NPN 3 kHz INP A 90° INP B x1 or INP A 90° INP B x2 ISI33.011AA01 ISI33.011AB01 PNP For position display or lenght measurement in conjunction with an incremental encoder Counting input 0° PNP 6 kHz Counting input 90° out of phase PNP 6 kHz INP A 90° INP B x1 or INP A 90° INP B x2 Signal input INP A Signal input INP B Operating mode 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Totalizers electronic Small impulse counters and position displays Display LCD, 8-digits ISI30, ISI31, ISI32, ISI33 Part number ISI30.01 A 01 Display A Not backlit B Backlit Design 0 NPN 7 kHz, contact 30 Hz 2 PNP 12 kHz, contact 30 Hz 3 AC/DC 30 Hz ISI32.01 3 A 01 Display A Not backlit B Backlit Design 3 AC/DC 30 Hz (Up/Down) Connection diagram ISI30, ISI31, ISI33, DC, NPN approx. 30 VDC approx. 5 VDC ISI31.01 A 01 Display A Not backlit B Backlit Design 0 NPN 7 kHz (Up/Down, A-B) 1 PNP 12 kHz (Up/Down, A-B) 3 AC/DC 30 Hz (A-B) ISI33.01 1 A 01 Display A Not backlit B Backlit Design 1 PNP 6 kHz (A 90° B) ISI31, ISI33, DC, PNP approx. 30 VDC approx. 5 VDC ISI30, DC, PNP approx. 30 VDC approx. 5 VDC 1 2 3 4 5 6 7 8 INP A INP B Reset Reset Enable Mode GND (-) Backlit (+) Backlit 24 VDC ±20 %, 50 mA 1 2 3 4 5 6 7 8 INP A INP B Reset Reset Enable Mode GND (-) Backlit (+) Backlit 24 VDC ±20 %, 50 mA 1 2 3 4 5 6 7 8 INP A INP B Reset Reset Mode GND (-) Backlit (+) Backlit 24 VDC ±20 %, 50 mA ISI30, AC/DC approx. 5 VDC 1 2 3 4 5 6 7 8 INP A Common AC/DC INP B Reset Reset Enable n.c. GND (-) Backlit (+) Backlit 24 VDC ±20 %, 50 mA 10..260 VAC / DC ISI31, ISI32, AC/DC approx. 5 VDC 1 2 10..260 VAC / DC 3 4 5 6 7 8 INP A Common AC/DC INP B Reset Enable Reset GND (-) Backlit (+) Backlit 24 VDC ±20 %, 50 mA 10..260 VAC / DC 10..260 VAC / DC 3 www.baumerivo.com www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Enable Small impulse counters and position displays Display LCD, 8-digits Totalizers electronic ISI30, ISI31, ISI32, ISI33 Trigger level Inputs NPN inputs Input level Low Input level High Input resistance PNP inputs Input level Low Input level High Input resistance Dimensions ISI30, ISI31, ISI32, ISI33 19.3 48 22 x 45 Input circuit Comparator (pin 1+2) 0...0.7 VDC 3...30 VDC 1 MΩ Comparator (pin 1+2) 0...0.7 VDC 4...30 VDC 100 kΩ Inputs AC/DC inputs Input level Low Input level High Input resistance NPN control inputs Input level Low Input level High Input resistance Input circuit Optocoupler (pin 1+3) 0...2 VDC/VAC 10...260 VDC/VAC 160 kΩ Pin 4, 5 0...0.7 VDC 3...5 VDC 2.2 MΩ 24 2.8 47.7 3 Front frame for screw/clip mount (included with delivery) 56 4 1 53 1 4 4 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. 25x50 25x50 40 32 28