ISI34.010AB01

Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Features – Time and hour counter – ISI34 - Time range 99999 h 59 min / 99999.99 h – ISI35 - Time range 9999 h 59 min 59 s / 9999999.9 s ISI34 - Hour counter Technical data - electrical ratings Voltage supply Display Backlit Digit height Function Count mode Control Reset Keylock Emitted interference Interference immunity Programmable parameters Approvals ISI34 Number of digits ISI35 Number of digits 8-digits 7-digits Lithium battery (approx. 8 years at 20 °C) LCD, 7-segment display 24 VDC ±20 %, 50 mA 8 mm Hour counter Adding NPN, PNP, Pulses 10...260 VAC/VDC Button and electric Yes, electric (keylock) DIN EN 61000-6-4 DIN EN 61000-6-2 Time range UL/cUL, CE conform Technical data - mechanical design Operating temperature Storing temperature Relative humidity Core cross-section Protection DIN EN 60529 Housing type Housing colour Dimensions W x H x L Installation depth Mounting Cutout dimensions Weight approx. -10...+60 °C -20...+70 °C 80 % non-condensing 2.5 mm² fine wire AWG 12 IP 65 face with seal Housing for control panel installation Deep grey, RAL 7021 48 x 24 x 48 mm 47.7 mm Clip frame or screw mount 25 x 50 mm (+0.5) 50 g Subject to modification in technic and design. Errors and omissions excepted. 1 www.baumerivo.com www.baumerivo.com 30/10/2008 Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Type table ISI34 - Hour counter Without backlit With backlit Version Brief description ISI34.010AA01 ISI34.010AB01 NPN Time in: - Hours and minutes - Hours and 1/100 h – Timer NPN 99999 h 59 min or 99999.99 h ISI34.011AA01 ISI34.011AB01 PNP Time in: - Hours and minutes - Hours and 1/100 h – Timer PNP 99999 h 59 min or 99999.99 h ISI34.013AA01 ISI34.013AB01 AC/DC Time in: - Hours and minutes - Hours and 1/100 h Timer AC/DC External Reset AC/DC 99999 h 59 min or 99999.99 h Signal input INP A Signal input INP B Operating mode ISI35 - Hour counter Without backlit With backlit Version Brief description ISI35.010AA01 ISI35.010AB01 NPN Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. – Timer NPN 9999 h 59 min 59 s or 999999.9 h ISI35.011AA01 ISI35.011AB01 PNP Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. – Timer PNP 9999 h 59 min 59 s or 999999.9 h ISI35.013AA01 ISI35.013AB01 AC/DC Time in: - Hours, minutes, sec. - Seconds and 1/10 sec. Timer AC/DC External reset AC/DC 9999 h 59 min 59 s or 999999.9 h Signal input INP A Signal input INP B Operating mode 2 www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Part number ISI34.01 A 01 Display A Not backlit B Backlit Design 0 NPN 1 PNP 3 AC/DC Connection diagram DC, NPN approx. 30 VDC n.c. INP B Reset Reset Enable Mode GND (-) Backlit (+) Backlit approx. 5 VDC ISI35.01 A 01 Display A Not backlit B Backlit Design 0 NPN 1 PNP 3 AC/DC DC, PNP approx. 30 VDC approx. 5 VDC AC/DC approx. 5 VDC INP A Common AC/DC INP B Reset Reset Enable Mode GND (-) Backlit (+) Backlit 10..260 VAC / VDC 10..260 VAC / VDC 1 2 3 4 5 6 7 8 1 2 3 4 5 6 24 VDC ±20 %, 50 mA 8 7 n.c. INP B Reset Reset Enable Mode GND (-) Backlit (+) Backlit 1 2 3 4 5 6 24 VDC ±20 %, 50 mA 8 7 24 VDC ±20 %, 50 mA 3 www.baumerivo.com www.baumerivo.com 30/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Time and hours meters electronic Count input for PNP, NPN or AC logic Display LCD, 8-digits, coded time range ISI34, ISI35 Trigger level Input NPN input Input level Low Input level High Input resistance PNP input Input level Low Input level High Input resistance AC/DC inputs Input level Low Input level High Input resistance Min. pulse time Dimensions ISI34, ISI35 19.3 48 22 x 45 Input circuit Comparator (pin 2) 0...0.7 VDC 3...30 VDC 1 MΩ Comparator (pin 2) 0...0.7 VDC 4...30 VDC 100 kΩ Optocoupler (pin 1 + 3) 0...2 VAC/VDC 10...260 VAC/VDC 160 kΩ 16 ms Reset input for DC-Version NPN reset input Pin 3 Input level Low Input level High Input resistance Min. pulse time NPN control inputs Input level Low Input level High Input resistance 0...0.7 VDC 3...30 VDC 2,2 MΩ 50 ms Pin 4 + 5 0...0.7 VDC 3...5 VDC 2.2 MΩ 24 2.8 47.7 3 Subject to modification in technic and design. Errors and omissions excepted. 30/10/2008 Front frame for screw/clip mount (included with delivery) 56 4 1 53 1 4 25x50 4 www.baumerivo.com 25x50 40 32 28