FI-J

COMPONENTS PRODUCT INFORMATION NEW Thin Wire Coaxial Connector for Small Portable Devices CONNECTOR FI-J Series MB-0143-3 October 2008 RoHS　Compliant The FI-J Series is a thin-wire coaxial connector compatible with 42 and 44 AWG wires, and it is ideally suited for compact devices. The FI-J achieves remarkable space saving on the board and is small enough to pass through a narrow hinge after the harness is assembled. Features Plug side can pass through 3.6mm dia. hinge after harness assembly. (40 position, 42 AWG) 2.5mm depth, 21.7mm width (for 40 position), with 1.58mm height when mated Stable connection ensured by 0.4mm effective contact length Highly reliable structure of supporting the contact points with each contact Enhanced connection stability with gold-plated ground contact points on plug and receptacle Mis-mating prevention structure Compatible with 42 and 44 AWG wires. (Proven harness assembly compliance) Receptacle side: Available on embossed tape for automatic mounting Receptacle side: Solder migration prevention structure with Ni barrier JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 1/7 MB-0143-3 General Specifications No. of contacts : 20, 25, 30, 35, 40 pos. Pitch: 0.4mm Operating Temperature: -40 Deg. C to +85 Deg. C Contact Resistance: 40m ohm max. Life Time: 30 times Rated Current: AC, DC each 0.3A per pos. Rated Voltage: AC, DC each 50V per pos. Insulation Resistance: 100M ohm min. Dielectric Withstanding Voltage : AC 250Vr. m.s per minute Applicable Cable: 42 to 44 AWG Materials and Finishes Component Contact Hold down Insulator Adsorption Insulator Contact Insulator Shell Material / Finish Receptacle(FI-J**S-VF15N) Copper alloy / Contact portion and terminal portion: Au flash plating over Ni Copper alloy / Contact portion and terminal portion: Au flash plating over Ni Heat resistant plastic UL94V-0 Heat resistant plastic UL94V-0 Plug(FI-J**C5 / FI-J**C2-SH-D) Copper alloy / Contact portion and terminal portion: Au flash plating over Ni Heat resistant plastic UL94V-0 Stainless steel / Au plating over Ni JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 2/7 MB-0143-3 Ordering Information Receptacle Side Individual Product (SJ104705) FI-J Series No. of Contacts: 20,25,30,35,40 ** S - VF 15N Modification Code 15N: General Vertical Type Socket Side Unit: mm Recommended dimension of board Dimension Chart Drawing when mated (for reference) JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 3/7 MB-0143-3 Ordering Information Receptacle Side Embossed Product (SJ104708) FI-J ** S - VF 15N - R3000 Series No. of Contacts: 20,25,30,35,40 Socket Side Unit: mm Dimension chart Embossed Reel 3000pcs. Modification Code 15N: General Vertical Type * One lane for 20 pos. type is carrier. JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 4/7 MB-0143-3 Ordering Information Plug Side, Insulator (SJ106631) FI-J Series No. of Contacts: 20,25,30,35,40 pos. ** C 5 Modification Code 5: General Plug Side Unit: mm Dimension Chart JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 5/7 MB-0143-3 Ordering Information Plug Side, Shell (SJ104707) FI-J ** C2 - SH - D Series Shell No. of Contacts: 20,25,30,35,40 Plug Side Unit: mm Modification Code D : General Dimension Chart JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 6/7 MB-0143-3 Related Documents • Product Specification Chart (JACS): JACS-10217 • Harness Assembly Handling Instructions (JAHL): JAHL-10217-04 • Connector Handling Instructions (JAHL): JAHL-10217-20 • Connector Insertion /Extraction Tools: Drawing No. : SJ713182-00 Part Number: SC-FIJ-1 Handling Instructions: T713182 Notice: Products shown in this leaflet are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: computers, office machines, measuring devices, telecommunication devices (terminals, mobile devices), AV devices, household applications, FA devices, etc. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2008，Japan Aviation Electronics Industry, Ltd. 7/7