WP7

COMPONENTS PRODUCT INFORMATION NEW RoHS Compliant 0.4mm Pitch, Stacking Type Board-to-Board (FPC) Connector CONNECTOR MB-0228-1 September 2011 WP7 Series Plug Plug Receptacle Receptacle The WP7 Series is a low-profile board-to-board(FPC) connector with 0.4mm pitch spacing that is ideal for high-density mounting in slim information communication devices like mobile phones, LCDs, notebook PCs, and PDAs. To satisfy different product function requirements, a low pin count type and a high pin count type (WP7A/WP7B) are available with the same mounting pattern. Features • 0.4mm pitch, 2 rows, 0.7mm stacking height. • Contact structure ensures high wear-resistance and high contact reliability. • Secure hold-downs prevent insulator breakage and peeling from FPC. • 2-point contact design to resist twisting stress. • Pb-free. Ni barrier on contact prevents solder wicking. • High removal force WP7A for (low pin count: 10-30 pos.) • Low insertion force WP7B for (high pin count 40-70 pos.) * Mounting pattern for WP7A and WP7B is the same. General Specifications (WP7A) No. of Contacts: 10, (16), (20), 26, 30 pos. (WP7B) No. of Contacts: 40, 50, 60, 70 pos. Note: () are planned to be developed Pitch: 0.4mm, 2 rows Operating Temperature: -40 Deg. C to +85 Deg. C Contact Resistance: 70mΩ max. (initial) Life Time: 50 mating cycles Rated Current: AC, DC 0.2A each per terminal Rated Voltage: AC, DC 50V Insulation Resistance: 100MΩ min. (initial) Dielectric Withstanding Voltage: AC250Vr.m.s per minute (WP7A) total insertion force: 1.50N x n max. (n: No. of pos.) (WP7A) total removal force: 0.15N x n min. (n: No. of pos.) (WP7B) total insertion force: 1.00N x n max. (n: No. of pos.) (WP7B) total removal force: 0.10N x n min. (n: No. of pos.) 1/7 JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd. MB-0228-1 Materials and Finishes Component Contact Insulator Hold-Down Material / Finish Cu alloy / Au plating (0.1 µm min.) Heat-resistant plastic Plug: Cu alloy / Au plating (0.1µm min.) Receptacle: Cu alloy / Sn plating Ordering Information (Plug) WP7 * - P *** V A * - R**** Series Modification Code Contact Shape P: Plug No. of Contacts Connection Type V: Stacking Reel Part Number (Note 1) (R6000: For Standard Product) (R300: For Inspection Jig Product) Modification Code 1: Standard Product E: Inspection Jig Product Finish A: Au plating Ordering Information (Receptacle) WP7 * - S *** V A * - R**** Series Modification Code Contact Shape S: Receptacle No. of Contacts Connection Type V: Stacking Reel Part Number (Note 1) (R6000: For Standard Product) (R300: For Inspection Jig Product) Modification Code 1: Standard Product E: Inspection Jig Product Finish A: Au plating Note 1) An embossed tape reel contains 6,000 pieces of standard product, or 300 pieces of inspection jig product. Please contact us for details on embossed tape specifications. JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd. 2/7 MB-0228-1 Part Number SJ Drawing WP7-P***VA1 SJ111875 WP7A Plug NUMBER OF CONTACT 芯数 DIMENSIONS 寸法 A 1.6 2.8 3.6 4.8 5.6 8.0 B 3.4 4.6 5.4 6.6 7.4 9.8 C 2.0 2.0 2.0 2.0 5.0 5.0 5.0 10 16 20 26 30 42 Note 1) Four corners are hold-downs. (Cannot be used for electrical connection.) ex. Connector with 20(N) pos. will have same amount of SMT terminals as 24(N+4) pos. Note 2) Dimension 3±0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd. 3/7 MB-0228-1 Part Number SJ Drawing WP7A-S***VA1 SJ111877 WP7A Receptacle Note 1) Dimension 3.5±0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd. 4/7 MB-0228-1 Part Number SJ Drawing WP7B-P***VA1 SJ111879 WP7B Plug NUMBER OF CONTACT 芯数 DIMENSIONS 寸法 A 7.6 9.6 11.6 13.6 B 9.4 11.4 13.4 15.4 C 5.0 5.0 5.0 5.0 40 50 60 70 Note 1) Four corners are hold-downs. (Cannot be used for electrical connection.) ex. Connector with 20(N) pos. will have same amount of SMT terminals as 24(N+4) pos. Note 2) Dimension 3±0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd. 5/7 MB-0228-1 Part Number SJ Drawing WP7B-S***VA1 SJ111881 WP7B Receptacle NUMBER OF CONTACT 芯数 DIMENSIONS 寸法 A 7.6 9.6 11.6 13.6 B 10.6 12.6 14.6 16.6 C 8.8 10.8 12.8 14.8 D 5.0 5.0 5.0 5.0 40 50 60 70 Note 1) Dimension 3.5±0.05 is recommended in case repair is needed. JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd. 6/7 MB-0228-1 Product Line-up Type Plug PN (Drawing) Receptacle PN (Drawing) No.of Contacts WP7-P***VA1 WP7A (SJ111875) WP7B-P***VA1 WP7B (SJ111879) WP7A-S***VA1 10~30 pos. (SJ111877) WP7B-S***VA1 40~70 pos. (SJ111881) Notice: Products shown in this brochure are made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 JAE PMK Div. Proprietary. Copyright © 2011, Japan Aviation Electronics Industry, Ltd. 7/7