50PA-392

SPECIFICATION SHEET JFW MODEL 50PA-392 LC HANDOVER TEST SYSTEM JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com Frequency Range Configuration Impedance VSWR Attenuation Range Insertion Loss Attenuation Accuracy Power Divider Isolation RF Input Power Switching Speed 800-2200 MHz 6 x 1 LC Handover Test System (See block diagram 092-5640) 50 Ohms nominal 1.6:1 maximum 0-127 dB in 1 dB steps 15.9 dB nominal ± 0.4 dB or 2% of programmed (whichever is greater) 25 dB minimum +20 dBm 5 microseconds typical (after command is received and processed) (3 milliseconds typical processing time) 100-240 VAC @ 47-63 Hz Keypad and LCD display Ethernet (10/100) and RS-232 Variable Handover Feedback Handover Fade Attenuator Feedback Fade Pause Set Attenuator Read Attenuator Change Baud Rate Identification (VHND Av Aw Vx Vy Tz) (FHND Av Aw Vx Vy Tz) (FAx y z t ) (FFAx y z t ) (PAUSEx) (SAx y ) (RAx ) (CBx ) (IDN ) AC Supply Manual Control Remote Control Remote Commands Baud Rates (RS-232 mode) RF Connector Temperature Range Physical Size 9600, 19200, or 38400 Baud N female 0ºC to +50ºC See outline drawing 092-5641 --CONTINUED-Page 1 of 2 JFW FORM E-7-F REV F SPECIFICATION SHEET JFW MODEL 50PA-392 LC HANDOVER TEST SYSTEM JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com ECR/ECN # 15779 15916 Page 2 of 2 DATE 11/26/2007 04/30/2008 05/28/2008 REV A B APPR / DATE TRS 11/26/2007 TRS 04/30/2008 TRS 05/28/2008 ECR/ECN # 15970 16179 DATE 06/04/2008 08/07/2008 REV C D APPR / DATE TRS 06/04/2008 TRS 08/07/2008 JFW FORM E-7-F REV F