50PMA-011

SPECIFICATION SHEET JFW MODEL 50PMA-011 TRANSCEIVER TEST SYSTEM JFW Industries, Inc. Phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com Frequency Range Configuration Impedance VSWR Insertion Loss Attenuation Range Attenuation Accuracy Isolation (Power Dividers) RF Input Power Switching Speed 20-500 MHz 17 Port Transceiver Test System (See Block Diagram 092-5391) 50 Ohms nominal 1.5:1 maximum 30 dB nominal 0-63 dB in 1 dB steps ± 0.3 dB or 2% of programmed (whichever is greater) 25 dB minimum (port to port) +17 dBm average +30 dBm (1dB compression) 10 microseconds typical (after command is received and processed) (3 milliseconds typical processing time) 100-240 VAC @ 47-63 Hz Keypad and LCD display Ethernet (10/100) and RS-232 Pause Variable Handover Feedback Handover Fade Attenuator Feedback Fade Set Attenuator Read Attenuator Change Baud Rate Identification SMA or N female 0º to +70º C See outline drawing 092-5390 (PAUSEx) (VHND Av Aw Vx Vy Tz) (FHND Av Aw Vx Vy Tz) (FAx y z t) (FFAx y z t) (SAx y) (RAx) (CBx) (IDN) AC Supply Manual Control Control Remote Commands RF Connector Operating Temperature Range Physical Size ECR/ECN # 15789 15916 Page 1 of 1 DATE 04/19/2007 04/30/2008 05/28/2008 REV A B APPR / DATE BAC 04/19/2007 TRS 04/30/2008 TRS 05/28/2008 ECR/ECN # 15968 16179 DATE 06/04/2008 08/07/2008 REV C D APPR / DATE TRS 06/04/2008 TRS 08/07/2008 JFW FORM E-7-F REV F