0783FB15A0100E

"High Frequency Ceramic Solutions" 50Ω:100Ω 783MHz RF Balun + Integrated Filter P/N 0783FB15A0100 Page 1 of 2 Detail Specification: 03/12/09 General Specifications 0783FB15A0100 Part Number 30 dB min.@ 2Fo 779 - 787 Frequency (MHz) 30 dB min.@ 3Fo Attenuation 50 Ω Unbalanced Impedance 30 dB min.@ 4Fo 100 Ω Operating Temperature -40 to +85°C Insertion Loss 1.5 dB max. Return Loss 10 dB min. Recommended Storage Conditions* +5 to +35°C, Humidity: 4575%RH, 18 mos. Max Phase Difference 180° ± 15 Input Power Balanced Impedance 2.0 dB max. Amplitude Difference 2 Watts max. 4,000 Reel Quantity * 18 months in vacuum sealed bag and 1 week cumulative after opened. Mechanical Dimensions Terminal Configuration In mm L 0.079 ± 0.004 2.00 ± 0.10 W 0.049 ± 0.004 1.25 ± 0.10 T 0.028 ± 0.004 0.70 ± 0.10 a 0.012 ± 0.004 0.30 ± 0.10 b 0.008 ± 0.004 0.20 ± 0.10 c 0.012 +.004/-.008 0.30 +0.1/-0.2 g 0.014 ± 0.004 0.35 ± 0.10 p 0.026 ± 0.002 W c L a p T g 0.65 ± 0.05 b No. Function 1 2 3 4 5 6 Unbalanced Port GND Balanced Port Balanced Port GND GND       Mounting Considerations * Line width should be designed to match 50  characteristic impedance, depending on PCB material and thickness. 0Ω Resistor # Pin reference 0.35 0.8 Unbalanced * Balanced 0.30 Units: mm Through-hole ( 0.3)    Balanced For DC-Blocking between balanced and unbalanced ports use 100pF (EIA 0402 or Solder Land    1.0 Layout A * Balanced       For DC Connections, go to Page 2 Unbalanced 0.8 Balanced 0.35 1.0 Layout B 0.30 Layout A is recommended for all sub 1 GHz designs Layout B can be used as an alternative when sharing same land pattern with 2.45GHz designs. Refer to p/n:2450FB15A0100 or 2450FB15L0001 Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2009 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" 50Ω:100Ω 783MHz RF Balun + Integrated Filter P/N 0783FB15A0100 Page 2 of 2 Detail Specification: 03/12/09 Typical Electrical Performance (T=25°C) Insertion Loss / Return Loss ) ) ) ) ) ) ) ) Amplitude Difference / Phase Difference ) ) DC Paths inside component: Pins 1‐4 and Pins 2‐5‐6 Pins 1, 3 ,and 4 are DC  blocked form Pins 2, 5, and  Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 2009 Johanson Technology, Inc. All Rights Reserved