1600BL15B100E

High Frequency Ceramic Solutions 1.7GHz 1:2 Ratio RF Balun, EIA 0805 SMD P/N 1600BL15B100 Page 1 of 2 Detail Specification: 3/13/2014 General Specifications 1600BL15B100 Part Number 50 Ω Unbalanced Impedance 100 Ω Differential Balanced Imp. Frequency 1 (MHz) 1500~1700 Insertion Loss 1 1.0 dB max. Return Loss 1 9.5 dB min. Frequency 2 (MHz) 1275~2200 Phase Difference 1 180° ± 10° Insertion Loss 2 1.5 dB max. Return Loss 2 8.5 dB min. Phase Difference 2 180° ± 15° 2.0 dB max. Amplitude Difference 3.0 watts max.(CW) Power Capacity Mechanical Dimensions Terminal Configuration In mm L 0.079 ± 0.004 2.00 ± 0.10 W 0.049 ± 0.004 1.25 ± 0.10 T 0.033 ± 0.004 0.85 ± 0.10 a 0.012 ± 0.004 0.30 ± 0.10 b 0.008 ± 0.004 0.20 ± 0.10 No. c 0.012 +.004/-.008 0.30 +0.1/-0.2 g 0.014 ± 0.004 0.35 ± 0.10 p 0.026 ± 0.002 0.65 ± 0.05 Packing Style P/N Suffix Evaluation Board W c L a p T g b Function Function No. Balanced Port 1 Unbalanced Port 4 GND GND (when no 5 DC feed 6 needed), or  2 DC Bias+ RF Bypass Cap (when DC feed needed)      3 Balanced Port Bulk Suffix = S eg. 1600BL15B100S T&R Suffix = E eg. 1600BL15B100E NC 1600BL15B100-EB1SMA (orderable item, 3-port female SMA 50Ohm board) Mounting Considerations 0.6 Mount these devices with brown mark facing up. 0.35 * 0.2 * Line width should be designed to match the  system characteristic impedance, depending on  PCB material and thickness. * Solder Resist 0.8 1.0 Land * 0.25 Without DC feed 0.3 Through-hole (  0.3) RF GND Cap 10‐15pF  EIA 0402 (1) When DC feed Used (1)The by‐pass capacitor should be placed as close as possible to the pin2 of de Want the layout file of the above? Send us a message at: www.johansontechnology.com/component/techquestion Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 ver 2.0 2014 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 1.7GHz 1:2 Ratio RF Balun, EIA 0805 SMD P/N 1600BL15B100 Page 2 of 2 Detail Specification: 3/13/2014 General Specifications 4,000 pcs Reel Quanity -40 to +85°C Operating Temperature +5 ~ +3° C, Humidity 45~75%RH Rec. Storage Conditions Typical Electrical Performance (T=25°C) Return Loss Insertion Loss 0 0 (dB)-1 (dB)-5 -10 IL RL -2 -3 -15 -20 -4 -25 -5 -30 1.2 1.4 1.6 1.8 2.0 2.2 freq, GHz 1.2 1.4 1.6 1.8 2.0 2.2 freq, GHz More Baluns www.johansontechnology.com/rfbaluns RoHS Compliance www.johansontechnology.com/technical-notes/rohs-compliance.html Packaging information www.johansontechnology.com/ipcpackaging.html Soldering Information (i.e. recommended profile) www.johansontechnology.com/ipcsoldering-profile Layout Files, s-parameters and any other technical questions www.johansontechnology.com/component/techquestion/?Itemid=407 MSL Info www.johansontechnology.com/technical-notes/msl-rating.html Recommneded Storage Condition and Max Shelf Life www.johansontechnology.com/ipcstorage-shelflife Antenna layout and tuning techniques www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services www.johansontechnology.com/ipcantennaservices Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 ver 2.0 2014 Johanson Technology, Inc. All Rights Reserved