2450AT18A100E

"High Frequency Ceramic Solutions" Mini 2.45 GHz Antenna Detail Specification: P/N 2450AT18A100 Page 1 of 4 7/18/2014 General Specifications Part Number Frequency Range Peak Gain Average Gain Return Loss Input Power Impedance Operating Temperature Reel Quanity 2450AT18A100 2400 - 2500 Mhz 0.5 dBi typ. (XZ-V) -0.5 dBi typ. (XZ-V) 9.5 dB min. 2W max. (CW) 50 Ω -40 to +125°C 3,000 Mechanical Dimensions L W T a 0.126 0.063 0.051 0.020 In ± 0.008 ± 0.008 +.004/-.008 ± 0.012 3.20 1.60 1.30 0.50 mm ± 0.20 ± 0.20 a W T +0.1/-0.2 L ± 0.30 Mounting Considerations Terminal Configuration No. a) Without Matching Circuits 1 2 Function Feeding Point NC 2 1 * b) With Matching Circuits 2.6 Note: It is recommended that the designer leave available slots for a "pi" (or shunt-seriesshunt) network. The antenna matching network values here are used when antenna is mounted on Johanson's evaluation board. The matching values and topology on clinet's PCB will be different. Need our help tuning the antenna on your board? Contact our RF Applications Eng Team at: 3.9nH 1.0pF 1.6 4.2 2.7nH * 0.4 1.9 Mount these devices with mark facing up. Units: mm * Line width should be designed to provide 50 Ω impedance matching characteristics. www.johansontechnology.com/component/techquestion Antenna Tuning services: www.johansontechnology.com/ipcantennaservices Need the layout file of the above? Contact us at: www.johansontechnology.com/en/ask-a-technical-question.html Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2014 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" Mini 2.45 GHz Antenna Detail Specification: P/N 2450AT18A100 Page 2 of 4 7/18/2014 o Typical Electrical Characteristics (T=25 C) Test Board: P/N: 2450AT18A100-EB1SMA (orderable item) The antenna matching network values here are used when antenna is monted on Johanson's evaluation board. The matching values on clinet's PCB will be different. Go to: www.johansontechnology.com/ipcantennaservices and see how to obtain the new values. If you need further help, contact our RF Applications Eng Team at: This 50Ω Feedline can be as short as needed, this lenth is just for reference to our EVB 13.5mm GND 6.5mm GND www.johansontechnology.com/component/techquestion 19mm 50 Feed Line Matching Circuit No Ground 39.5mm 6.5mm Antenna Return Loss with matching circuit @ +25C VSWR with matching circuit @ +25C and +125C Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2014 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" Mini 2.45 GHz Antenna Detail Specification: P/N 2450AT18A100 Page 3 of 4 7/18/2014 Typical Radiation Patterns at 2.45GHz (+25C) XY-V/XY-H XY cut @2.45GHz Vertical Horizontal Z 180° X 270° 90° Y 0° XZ-V/XZ-H XY-cut scanning direction XZ cut @2.45GHz Vertical Horizontal Y 180° X 90° 270° Z 0° YZ-V/YZ-H XZ-cut scanning direction YZ cut @2.45GHz Vertical Horizontal X 180° Y 270° 90° Z 0° YZ-cut scanning direction Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2014 Johanson Technology, Inc. All Rights Reserved "High Frequency Ceramic Solutions" Mini 2.45 GHz Antenna Detail Specification: P/N 2450AT18A100 Page 4 of 4 7/18/2014 Part Number Explanation Bulk (loose pieces) T&R T & R (Reverse) 100% Tin (RoHS) Termination style Tin / Lead Packaging Style P/N Suffix Suffix = S Eg. 2450AT18A100S Suffix = E Eg. 2450AT18A100E Suffix = R Eg. 2450AT18A100R (MOQ Applies) Suffix = S/E/R Eg. 2450AT18A100(S, E, R) Please consult Factory Evaluation Board(s) (1-port SMA antenna 2450AT18A100-EB1SMA (Page 2) Orderable item! test boards) AEC-Q2000 qualification available after special p/n: 2450AT18A100-AEC order. MOQ of 24K PCS applies for AEC and allow 16 weeks for AEC report leadtime. Would you like Johanson Technology's RF team to help you design and tune our antenna on your board? Click on the link below: Antenna layout review, tuning, and characterization services www.johansontechnology.com/ipcantennaservices Packaging information www.johansontechnology.com/ipcpackaging.html Soldering Information www.johansontechnology.com/ipcsoldering-profile RoHS Compliance www.johansontechnology.com/technical-notes/rohs-compliance.html MSL Info www.johansontechnology.com/technical-notes/msl-rating.html Recommneded Storage Condition and Max Shelf Life www.johansontechnology.com/ipcstorage-shelflife Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver 1.3 2014 Johanson Technology, Inc. All Rights Reserved