5400BL14B100T

High Frequency Ceramic Solutions 5.4GHz EIA 0603 Mini Balun with DC Feed Option. 100Ω Differential Impedance, 50Ω Single Ended P/N 5400BL14B100 Detail Specification: 7/12/2019 Page 1 of 4 General Specifications Part Number 5400BL14B100 Frequency (MHz) 180 ± 15 @ 4900 - 5875 Phase Difference (degree ) 4900 - 5950 180 ± 20 @ 5875 - 5950 Balanced Diff. Impedance 100 Ω Return Loss 9.5 dB min. Unbalanced Impedance 50 Ω Operating Temperature -40 to +85°C Insertion Loss @ BW 0.8dB Typ (1.0 dB max.) Amplitude Difference 1.5 dB max. Reel Quantity 4,000 pcs Power Capacity 0.5W max. (CW) You can download measured s-parameters of this component at: https://www.johansontechnology.com/baluns Part Number Explanation P/N Packaging Style Suffix Termination Style Bulk Suffix = S Eg. 5400BL14B100S T&R Suffix = T Eg. 5400BL14B100T (Reel: 4000pcs.) 100% Tin Suffix = None Eg. 5400BL14B100(T or S) Mechanical Dimensions In Terminal Configuration mm 0.063 ± 0.004 0.031 ± 0.004 1.60 ± 0.10 0.80 ± 0.10 a 0.024 ± 0.004 0.008 ± 0.004 0.60 ± 0.10 0.20 ± 0.10 b 0.008 +0.004/0.006 0.20 +0.1/-0.15 c g 0.006 ± 0.004 0.012 ± 0.004 0.15 ± 0.10 0.30 ± 0.10 p 0.020 ± 0.002 0.50 ± 0.05 L W T W L 2 4 Balanced Port (OUT2) 5 GND NC     p T g Unbalanced Port DC feed + RD GND 3 Balanced Port (OUT1) 6 c a 1    b Mounting Considerations Mount these devices with brown mark facing up. Without DC Feed 0.25 With DC Feed 0.25 * 0.3 * * Line width should be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness. By-pass capacitor should be connected when feeding DC power, go to page 2 for details Solder Resist 0.55 Land 0.3 0.25 0.55 Through-hole ( Φ0.3) Units: mm 0.25 Need our help laying this out for you? Need the layout file? Send us a message at: www.johansontechnology.com/component/techquestion Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2019 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 5.4GHz EIA 0603 Mini Balun with DC Feed Option. 100Ω Differential Impedance, 50Ω Single Ended P/N 5400BL14B100 Detail Specification: 7/12/2019 Page 2 of 4 Equivalent Circuit Internal shielding ground plates Unbalanced Port PIN1 λ/4 λ/4 λ/4 λ/4 PIN3 Balanced Port1 PIN2 PIN4 Balanced Port2 PIN5 PIN2 Pin 6 is a floating pin (no internal connections) but it still must have soldering pad Measuring Diagram DC-Feed recommended L/C network: Capacitor value of 2.7pF and RF choke (inductor) 3.9nH are recommended when DC bias is used.        2.7pF RF Choke (3.9nH) Bypass capacitor and RF choke should be placed phisically as close as possible to PIN2 of balun. Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2019 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 5.4GHz EIA 0603 Mini Balun with DC Feed Option. 100Ω Differential Impedance, 50Ω Single Ended P/N 5400BL14B100 Detail Specification: 7/12/2019 Page 3 of 4 Typical Electrical Characteristics (T=25°C) Insertion Loss & Return Loss 0 RL -10 -20 (dB) IL -30 -40 0 1 2 3 4 5 6 freq, GHz Amp. & Phase Differential 2.0 dif_amplitude (dB) 200 1.5 195 1.0 190 0.5 185 0.0 180 dif_phase -0.5 175 -1.0 170 -1.5 165 -2.0 160 4.0 4.2 4.4 4.6 4.8 5.0 5.2 5.4 5.6 5.8 6.0 freq, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2019 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions 5.4GHz EIA 0603 Mini Balun with DC Feed Option. 100Ω Differential Impedance, 50Ω Single Ended P/N 5400BL14B100 Detail Specification: 7/12/2019 Page 4 of 4 More Balun info at: https://www.johansontechnology.com/baluns Packaging information https://www.johansontechnology.com/tape-reel-packaging Soldering Information https://www.johansontechnology.com/ipcsoldering-profile MSL Info https://www.johansontechnology.com/msl-rating Recommneded Storage Condition and Max Shelf Life https://www.johansontechnology.com/recommended-storage-conditions RoHS Compliance https://www.johansontechnology.com/rohs-compliance Antenna layout and tuning techniques https://www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services https://www.johansontechnology.com/ipc-antenna-services Layout Files, s-parameters and any other technical questions https://www.johansontechnology.com/ask-a-question Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012, USA • TEL +1.805.389.1166 Ver 1.2 2019 Johanson Technology, Inc. All Rights Reserved