S2AA101F1R5M1S2001W

slC MiCrowave / MilliMeTerwave CapaCiTors Key FeaTures • Ceramic SLC Low Profile Devices Exhibit Very High-Q / Low Insertion Loss, SRFs to 50 GHz • Thin Film Gold Electrodes Provide Superior Wire Bonding & Die Attach Performance • Four SLC Device Types to Fit Many Applications: Standard (Die) SLCs Bar SLC Arrays Border SLCs Custom SLC Products • RoHS - Available on all dielectrics • Custom sizes are available - please consult factory APPLICATIONS • Microwave Integrated Components • GaAs Integrated Circuits • RF/Microwave Components • DC Block, Bypass, Tuning dieleCTriC CHaraCTerisTiCs DIELECTRIC CODE CONSTANT (K) 52 TEMPERATURE COEFFICIENT TEMPERATURE RANGE C 23 0 ± 30 ppm -55°C to +125°C K 37 0 ± 30 ppm -55°C to +125°C N 80 0 ± 30 ppm -55°C to +125°C U 120 -750 ± 120 ppm -55°C to +125°C V 160 -1500 ± 500 ppm -55°C to +125°C R 280 -2200 ± 500 ppm -55°C to +125°C L 350 -3300 ± 500 ppm -55°C to +125°C D 600 ± 10% -55°C to +125°C B 1200 ± 10% -55°C to +125°C W 2000 ± 15% -55°C to +125°C X 2700 ± 15% -55°C to +125°C T 4000 ± 15% -55°C to +125°C Z 8000 +22% -56% +10°C to +85°C Y 12000 +22% -82% -30°C to +85°C DISSIPATION FACTOR INSULATION RESISTANCE TEST COND. AVAILABLE TOLERANCES ≤ 0.15% ≤ 0.15% ≤ 0.15% > 1000 GΩ 1 B,C,D ( A, 1000 GΩ 1 B,C,D ( A, 1000 GΩ 1 B,C,D ( A, 10 pF) ≤ 0.25% ≤ 0.25% ≤ 0.25% ≤ 1.50% ≤ 2.50% ≤ 2.50% ≤ 2.50% ≤ 2.50% ≤ 2.50% ≤ 4.00% ≤ 4.00% > 1000 GΩ 1 J,K (B-D) > 1000 GΩ 1 J,K (B-D) > 1000 GΩ 1 J,K (B-D) > 1000 GΩ 1 J,K,M (B-D) > 100 GΩ 2 K,M > 100 GΩ 2 K,M > 100 GΩ 2 K,M > 100 GΩ 2 K,M > 100 GΩ 2 K,M > 10 GΩ 2 M,Z > 10 GΩ 2 M,Z VOLTAGE RATINGS: 50 &100 WVDC DIELECTRIC STRENGTH: 2.5 x WVDC min, 25°C, 50 mA max TEST CONDITIONS: 1) 1.0±0.2 VRMS @1MHz, 25°C 2) for values ≤100pF: 1.0±0.2 VRMS @1MHz, 25°C; for ALL other values: 1.0±0.2 VRMS @1KHZ, 25°C www.johansontechnology.com v-series & B-series Border slC CapaCiTors Recessed SLC electrode borders help prevent shorting from conductive epoxy squeeze-up and aid visual recognition equipment. The V-Series SLCs feature dual borders (top & bottom) while the B-Series SLCs feature a single border (top-only.) v-series & B-series CapaCiTanCe seleCTion CAP. CODE VALUE 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 0.1 pF 0.2 pF 0.3 pF 0.4 pF 0.5 pF 0.6 pF 0.7 pF 0.8 pF 0.9 pF 1.0 pF 1.1 pF 1.2 pF 1.3 pF 1.4 pF 1.5 pF 1.6 pF 1.7 pF 1.8 pF 1.9 pF 2.0 pF 2.1 pF 2.2 pF 2.4 pF 2.7 pF 3.0 pF 3.3 pF 3.6 pF 3.9 pF 4.3 pF 4.7 pF 5.1 pF 5.6 pF 6.2 pF 6.8 pF V10 V12 V15 C N N V V V V R R R R L L L L D D D D D D D D D B B B B B B B B W W C K N N N V V V V V R R R R R R R L L L L L L D D D D D D B B B B B C C K N N N V V V V V V R R R R R R L L L L L L D D D D D D D B B B 100V 100V 100V V20 V25 100V 100V C C K K K N N N N N N N N V V V V V V V V V V L L L L L L L L D D C C C K K K K K N N N N N N N N N N N V V V V V V V R R R R R R V30 100V C C C C C K K K K K K K K K N N N N N N N N N V V V V V V V V40 100V V50 CAP. 100V CODE VALUE C C C C C C C C C K K K K K K K K K N N N 6R8 7R5 8R2 9R1 100 120 150 180 200 220 270 330 390 470 500 510 560 680 820 101 121 151 181 201 221 271 331 391 471 561 681 821 102 122 6.8 pF 7.5 pF 8.2 pF 9.1 pF 10 pF 12 pF 15 pF 18 pF 20 pF 22 pF 27 pF 33 pF 39 pF 47 pF 50 pF 51 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 200 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF C C C C C C C K K K K K K K K K K N N N N N N N V V V10 V12 V15 V20 V25 V30 V40 V50 W W W W X X T T T Z Z Y Y Y Y Y Y B B W W W W X X T T T Z Z Z Y Y Y Y Y B B B B W W W X X X T T Z Z Z Z Z Y Y Y D D D D D B B B B B W W X X X T T T Z Z Z Y Y Y Y R L L D D D D D B B B B W W W X X X T T T Z Z Z Y Y Y V R R R L L L D D D D B B B B B B W W X X T T T Z Z Y Y Y Y V V V V V R R R L L D D D D D D B B B W W X T T T T Z Z Z Y Y N N N N V V V R R R L L L D D D D D D B B W W X X X T T T Z Z Y Y Y 100V 100V 100V 100V 100V 100V 100V 100V Color breaks used to highlight changes in dielectric material, letters indicate the specific material. v-series & B-series MeCHaniCal CHaraCTerisTiCs w’ B Top View L Side View Style V w’ (mm) V10 V12 V15 V20 V25 V30 V40 .010 .012 .015 .020 .025 .030 .040 (0.25) (0.30) (0.38) (0.51) (0.64) (0.76) (1.02) V50 .050 (1.27) NOM. .007 .008 .011 .016 .020 .026 .036 .044 (mm) (0.17) (0.20) (0.28) (0.41) (0.51) (0.66) (0.91) (1.12) T B ±.001” Side View Style B T ±.002” w’ W T SIZE W&L ±.001” (mm) (mm) *Min Border 0.0005” .001* (0.025)* .001* (0.025)* .002 (0.051) .002 (0.051) .002 (0.051) .002 (0.051) .002 (0.051) .003 (0.076) NOM. 0.004” ~ 0.008” (NOM. 0.10 ~ 0.20) Contact factory for other sizes, values or configurations www.johansontechnology.com 53 u-series sTandard single layer CapaCiTors SIZE W Top View Top View L L (mm) +.001” -.003” U10 U12 U15 U20 U25 U30 U35 U50 U70 .010 .012 .015 .020 .025 .030 .035 .050 .070 (0.25) (0.30) L MAX. .012 T (mm) (0.30) (0.38) T ±.002” (mm) .015 (0.38) (0.51) .020 .025 (0.51) T (0.76) .030 (0.64) (0.89) .035 (0.76) (1.27) .040 (0.89) (1.78) .060 (1.02) .080 (1.52) (2.03) .090 (2.29) .100 (2.54) NOM. 0.004” ~ 0.008” Side View Style U W (0.64) U90 (NOM. 0.10 ~ 0.20) Contact factory for other sizes, values or configurations Side View Style U W CAPACITANCE CODE 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 VALUE 0.1 pF 0.2 pF 0.3 pF 0.4 pF 0.5 pF 0.6 pF 0.7 pF 0.8 pF 0.9 pF 1.0 pF 1.1 pF 1.2 pF 1.3 pF 1.4 pF 1.5 pF 1.6 pF 1.7 pF 1.8 pF 1.9 pF 2.0 pF 2.1 pF 2.2 pF 2.4 pF 2.7 pF 3.0 pF 3.3 pF 3.6 pF 3.9 pF 4.3 pF 4.7 pF 5.1 pF 5.6 pF 6.2 pF 6.8 pF 7.5 pF 8.2 pF 9.1 pF 10 pF U10 U12 50V C K N N U V V V R R R R R L L L L L L D D D D D D D D B B B B B B B W W W X U15 U20 U25 50V 50V 100 V 50V 100 V C K N N N N U V V V V V V V R R R R R L L L L L L D D D D D D D B B B B B C K K K N N N N N N N U U U U U V V V V V R R R R R R L L L D D D D D D C K K N N N N U U V V V V V V V R R R R R R L L L L L D D D D D D D B B B C C C K K K K K N N N N N N N N N N U U U U V V V V R R R R R R L L L C C K K K N N N N N N N N U U U U U V V V V V R R R R R R L L L D D D D U50 U70 U90 CAPACITANCE 50V 100V 100V 100V 100V C C C C C C C K K K K K K K K K K N N N N N N N U U U V C C C C C C C K K K K K K K K K N N N N N N N N N U U V V V V R R C C C C C C C C C C K K K K K K K K N N N N N N N N N N V C C C C C C C C C K K K K K K N N N C C C C C C C C K K K K K N N CODE 0R1 0R2 0R3 0R4 0R5 0R6 0R7 0R8 0R9 1R0 1R1 1R2 1R3 1R4 1R5 1R6 1R7 1R8 1R9 2R0 2R1 2R2 2R4 2R7 3R0 3R3 3R6 3R9 4R3 4R7 5R1 5R6 6R2 6R8 7R5 8R2 9R1 100 U30 50V 100 V C C C C K K K K K K K K N N N N N N N N N U U U U V V V R R R R R C C C K K K K K N N N N N N N N N N U U U U V V V V R R R R R L L L L U35 50V 100 V C C C C C K K K K K K K K K K N N N N N N N U U U V V V V R C C C K K K K K K N N N N N N N N N N U U U V V V V V R R R R L Color breaks used to highlight changes in dielectric material, letters indicate the specific material 54 www.johansontechnology.com VALUE 0.1 pF 0.2 pF 0.3 pF 0.4 pF 0.5 pF 0.6 pF 0.7 pF 0.8 pF 0.9 pF 1.0 pF 1.1 pF 1.2 pF 1.3 pF 1.4 pF 1.5 pF 1.6 pF 1.7 pF 1.8 pF 1.9 pF 2.0 pF 2.1 pF 2.2 pF 2.4 pF 2.7 pF 3.0 pF 3.3 pF 3.6 pF 3.9 pF 4.3 pF 4.7 pF 5.1 pF 5.6 pF 6.2 pF 6.8 pF 7.5 pF 8.2 pF 9.1 pF 10 pF u series slC CapaCiTanCe seleCTion (ConT.) CAPACITANCE CODE VALUE 100 10 pF 120 12 pF 150 15 pF 180 18 pF 200 20 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 500 50 pF 510 51 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 201 200 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1000 pF 122 1200 pF 152 1500 pF 182 1800 pF 202 2000 pF 252 2500 pF 402 4000 pF U10 U12 50V X X T T T T Z Z Z Y Y Y Y 50V B W W W X X T T T Z Z Z Z Z Y Y U15 50V D B B B W W W X X T T T T Z Z Z Y Y Y U20 100 V B B W W W X X T T T Z Z Z Z Y Y Y 50V L D D D D B B B W W W W X X T T T Z Z Z Y Y Y U25 100 V D D B B B B W W X X X X T T Z Z Z Y Y Y Y 50V R L L D D D D B B B B B B W W X T T T Z Z Z Y Y Y Y 100 V L D D D D B B B W W W W X X T T T Z Z Z Z Y Y U30 50V R R R L L L D D D D B B B B B W W X T T T T Z Z Z Y Y U35 100 V L L L D D D D B B B B B W W X X T T T Z Z Z Z Y Y 50V V V R R R R L L D D D D D B B B W W W X X T T T Z Z Z Y Y U50 U70 U90 100V R R L L D D D D B B B B B W X X X X T T T Z Z Z Y Y Y 100V V V V V R R R L L D D D D D B B B B W W W X X T T T Z Z Z Y Y 100V N N N V V V V R R R R R R L D D D B B B B W W X X T T T T Z Y Y Y Y 100V N N N N N N U U V V V R R R R L D D D B B B W W W X X X T T Z Z Z Y Y CAPACITANCE CODE 100 120 150 180 200 220 270 330 390 470 500 510 560 680 820 101 121 151 181 201 221 271 331 391 471 561 681 821 102 122 152 182 202 252 402 VALUE 10 pF 12 pF 15 pF 18 pF 20 pF 22 pF 27 pF 33 pF 39 pF 47 pF 50 pF 51 pF 56 pF 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 200 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1000 pF 1200 pF 1500 pF 1800 pF 2000 pF 2500 pF 4000 pF Color breaks used to highlight changes in dielectric material, letters indicate the specific material How To order u, v, & B series 500 VOLTAGE CODE 500 = 50 V 101 = 100 V U 15 N 1R0 CASE SIZE See Mechanical Characteristics DIELECTRIC See Dielectric Selection CAPACITANCE 1st two digits are significant; third digit denotes number of zeros, R denotes decimal point. R05 = .05 pF 2R0 = 2.0 pF 210 = 21 pF 101 = 100 pF CHIP STYLE U = Standard SLC B = Single Border SLC V = Dual Border SLC B TOLERANCE **A= ± 0.05 pF *B = ± 0.10 pF *C = ± 0.25 pF *D = ± 0.50 pF F = ± 1% G = ± 2% J = ± 5% K = ± 10% M = ± 20% *Values < 10 pF **Values ≤ 2 pF T TERMINATION N = TiW/Ni/Au T = TiW/Au MARKING 4 = No marking Available 4 W PACKAGING G = Gel-Pak R = 6” Ring S = Vial Pack / Bulk W = Conductive Waffle Trays Consult factory for special packaging or quantity per package requests. NOTE: The “U” series thick-film terminated SLC’s are fully supported and orders may be placed using legacy part numbers. These parts are identified by alpha case size code and contain termination codes “G” or “9” i.e. 500UDDB200JG4W. www.johansontechnology.com www.johansontechnology.com 55 slC TeMperaTure CHaraCTerisTiCs 40% 30%  Capacitance Change 20%    10%  0%  L (-3300±500ppm)  U (-750±100ppm)  R (-2200±500ppm)  C, K, N (0ppm)  V (-1500±300ppm)           3             -10%         -20%  -30%  -40% -55 -35 -15 5 25 45 65 85 105 125 Temperature (°C) 10% Capacitance Change 5%    T (± 15%)  B (± 10%)  D (± 10%)  W (±10%)  X (± 10%)         0%            -5%           -10%    -15% -55 -35 -15 5 25 45 65 85 Temperature (°C) 56 www.johansontechnology.com 105 125 slC TeMperaTure CHaraCTerisTiCs J  0%  Capacitance Change -20%   -40%  -60% -80% -100% -35  Y (+22% -82%)  Z (+22% -56%)    J -25 -15 -5 5 15 25 35 45 55 65 75 85 Temperature (°C) MeTallizaTion CHaraCTerisTiCs For gBBl / slC METALLIZATION TYPE TiW/Au (Titanium-Tungsten/Gold) TiW/Ni/Au (Titanium-Tungsten/Nickel/Gold) TERMINATION CODE T N ATTACHMENT COMPATIBILITY Wire / Ribbon Bonding Silver or Gold Conductive Epoxy Au/Ge or Au/Si Eutectic Preform Excellent High Temperature Resistance (400°C) Unsuitable for Pb/Sn or Au/Sn Soldering Pb/Sn or Au/Sn Soldering Au/Sn Eutectic Preform Moderate High Temp. Resistance (325°C) Long term high temperature may cause Ni diffusion and wire bond problems on Au/Ge SLC thick-film terminations ( legacy codes “G” and “9”) are still supported. Contact the factory for compatibility information. environMenTal CHaraCTerisTiCs For gBBl / slC BOND STRENGTH: SHEAR STRENGTH: SOLDER HEAT RESISTANCE: SOLDERABILITY: SHOCK: THERMAL SHOCK: Exceeds MIL-S-883, Meth. 2011 Exceeds MIL-S-883, Meth. 2019 MIL-S-202, Meth. 210-C, (260±5°C, 5 sec.) MIL-S-202, Meth. 208, (245±5°C, 5 sec.) MIL-S-202, Meth. 213-I, (100g, 6 msec.) MIL-S-202, Meth. 107, A, (-55 to +125°C) VIBRATION: MIL-S-202, Meth. 204-G, (30g, 10-2000 Hz) BURN-IN/LIFE TEST: LOW VOLTAGE HUMIDITY: BAROMETRIC PRESSURE: IMMERSION/SALT SPRAY: MOISTURE RESISTANCE: www.johansontechnology.com MIL-S-202, Meth. 108, A/F Mil-C-49464, Para. 3.17 MIL-S-202, Meth. 105, B MIL-S-202, Meth. 104, B MIL-S-202, Meth. 106 57