Snap-In Aluminum Electrolytic Capacitors
ALC10, +85°C
Overview
Applications
The KEMET ALC10 snap-in capacitors covers a wide range
of case sizes and voltage ratings. The ALC10 is designed
for high voltage, it is up to 600 VDC, has high ripple current
applications and features surge voltage capability and very
long-life performance.
The KEMET ALC10 capacitors are ideally suited for
industrial and commercial applications demanding high
reliability and long life expectancy. Typical applications
include frequency converters, uninterruptible power supply
(UPS) systems and switch mode power supplies (SMPS).
Benefits
• Compact size
• Long life, up to 18,000 hours at +85°C (VR , IR applied)
• High ripple current
• High voltage
• Excellent surge voltage capability
• Optimized designs available upon request
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
ALC10
A
392
BB
040
Series
Termination
Capacitance Code (µF)
Size Code
Rated Voltage (VDC)
Snap-In
Aluminum
Electrolytic
See Termination Table
First two digits
represent significant
figures. Third digit
specifies number of
zeros.
See Dimension Table
035 = 35
040 = 40
063 = 63
100 = 100
200 = 200
250 = 250
350 = 350
400 = 400
450 = 450
500 = 500
550 = 550
600 = 600
Built Into Tomorrow
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
1
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Performance Characteristics
Item
Performance Characteristics
Capacitance Range
47 – 100,000 µF
Rated Voltage
35 – 600 VDC
Operating Temperature
−40 to +85°C
Capacitance Tolerance
±20% at 100 Hz/+20°C
D (mm)
Rated Voltage and Ripple
Current at +85°C (hours)
Rated Voltage at +85°C (hours)
25
10,000
16,000
30
13,000
21,000
35
15,000
24,000
40 – 50
18,000
29,000
Operational Lifetime
End of Life Requirement
Shelf Life
Leakage Current
∆ C/C < ±10%, ESR < 2 x initial ESR value, IL < initial specified limit
2,000 hours at +85°C or 30,000 hours at +40°C 0 VDC
I = 0.006 CV or 6,000 (µA, whichever is smaller)
C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.
Procedure
D ≤ 40 mm
0.75 mm displacement amplitude
or 10 G maximum acceleration.
Vibration applied for three
2-hour sessions at 10 – 500 Hz
(capacitor clamped by body).
D > 40 mm
0.35 mm displacement amplitude
or 5 G maximum acceleration.
Vibration applied for three
0.5-hour sessions at 10 – 55 Hz
(capacitor clamped by body).
Vibration Test Specifications
Standards
Requirements
No leakage of electrolyte
or other visible damage.
Deviations in capacitance from
initial measurements must not
exceed: Δ C/C < 5%
IEC 60384–4 long life grade 40/85/56
Surge Voltage
Condition
≤ 30s Surge followed by a no load
period of 330s, 1,000 cycles at +85°C
Voltage (VDC)
35
40
63
100
200
250
350
400
450
500
550
600
40.25
46
72.5
115
230
288
385
440
495
550
605
660
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
2
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Test Method & Performance
Endurance Life Test
Conditions
Performance
Temperature
+85°C
Test Duration
2,000 hours
Ripple Current
Voltage
Performance
Rated ripple current in specified table
The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
The following specifications will be satisfied when the capacitor is tested at +20°C:
Capacitance Change
Equivalent Series Resistance
Leakage Current
≤ 160 V
Within 15% of the initial value
≥ 160 V
Within 10% of the initial value
Does not exceed 200% of the initial value
Does not exceed leakage current limit
Dimensions – Millimeters
Size Code
BB
BC
BD
CB
CC
CD
CE
CF
DB
DC
DD
DE
DF
DG
DH
DL
EB
EC
ED
EE
EF
EG
Dimensions in mm
D
L
−0/+1
±2
Approximate
Weight
Grams
25
25
25
30
30
30
30
30
35
35
35
35
35
35
35
35
40
40
40
40
40
40
30
35
40
30
35
40
45
50
30
35
40
45
50
55
60
80
30
35
40
45
50
55
28
30
35
35
40
45
50
55
42
50
55
65
70
75
80
105
49
57
65
80
82
95
Size Code
EH
EJ
EL
EP
FB
FC
FD
FE
FF
FG
FH
FL
FP
KB
KC
KD
KE
KF
KG
KH
KL
KP
Note: Dimensions include sleeving
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Dimensions in mm
D
L
−0/+1
±2
Approximate
Weight
Grams
40
40
40
40
45
45
45
45
45
45
45
45
45
50
50
50
50
50
50
50
50
50
60
70
80
105
30
35
40
45
50
55
60
80
105
30
35
40
45
50
55
60
80
105
98
113
131
170
62
72
82
92
103
113
123
164
215
75
88
100
113
126
138
151
201
264
Note: Dimensions include sleeving
A4020_ALC10 • 2/17/2021
3
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Termination Tables
Termination
Code
A
D
F
C
E
25
•
•
•
30
•
•
•
35
•
•
40
•
•
G
H
•
•
•
•
•
•
•
•
45
•
•
•
•
50
•
•
•
•
Diameter (mm)
Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any
position. Dummy pins must be isolated on 4 and 5 pin styles.
Termination
Code
Termination
Style
LL
±1
Standard Termination Option
A
2 Pin
6.3
G (D ≥ 45)
5 Pin
6.3
Other Termination Options
D
2 Pin
4.0
F
3 Pin
4.0
C
4 Pin
6.3
E
4 Pin
4.0
H
5 Pin
4.0
Dimensions in mm
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
4
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Termination Tables cont.
Style A/D
SIDE VIEW
PCB LAYOUT
TERMINAL
END VIEW
L
D
2 ±0.1
LL
Style F
SIDE VIEW
D
+
SIDE VIEW
TERMINAL
END VIEW
L
3.3 ±0.1
Ø2.5 Minimum
+ ve
4.75 ±0.1
10 ±0.1
Ø2 ±0.1 Typical
-
LL
Style C/E
PCB LAYOUT
TERMINAL
END VIEW
L
10 ±0.1
PCB LAYOUT
4 Holes Ø2 ±0.1
on a Ø22.5 PCD
- ve
-
D
+
30°
30°
LL
Style G/H
SIDE VIEW
+ ve
TERMINAL
END VIEW
L
-
D
+
LL
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
PCB LAYOUT
5 Holes Ø2 ±0.1
on a Ø25.0 PCD
- ve
30°
30°
30°
+ ve
A4020_ALC10 • 2/17/2021
5
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Shelf Life
The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however,
the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three
years at 40°C. See sectional specification under each product for specific data.
Re-age (Reforming) Procedure
Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen
to a steady value below the specified limit. During re-aging, a maximum charging current of twice the specified leakage
current or 5 mA (whichever is greater) is suggested.
Reliability
The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of
conditions for a given length of time.
In practice, it is impossible to predict with absolute certainty how any individual component will perform. Therefore, we
must utilize probability theory. It is also necessary to clearly define the level of stress involved (e.g., operating voltage, ripple
current, temperature and time.) Finally, the meaning of satisfactory performance must be defined by specifying a set of
conditions which determine the end of life of the component.
Reliability as a function of time, R(t), is normally expressed as: R(t) = e-λt, where R(t) is the probability that the component
will perform satisfactorily for time t, and λ is the failure rate.
Failure Rate
The failure rate is the number of components failing per unit of time. The failure rate of most electronic components follows
the characteristic pattern:
• Early failures are removed during the manufacturing process.
• The operational life is characterized by a constant failure rate.
• The wear out period is characterized by a rapidly increasing failure rate.
The failures in time (FIT) are given with a 60% confidence level for the various type codes. By convention, FIT is expressed
as 1 x 10-9 failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours, e.g., 100 FIT = 1 x 10-7
failures per hour = 0.01%/1,000 hours.
End of Life Definition
Catastrophic Failure: short circuit, open circuit or safety vent operation
Parametric Failure:
• Change in capacitance > ±10%
• Leakage current > specified limit
• ESR > 2 x initial ESR value
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
6
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
MTBF
The mean time between failures (MTBF) is simply the inverse of the failure rate.
MTBF = 1/λ
Failure Rate
early failures
wear out
operational life
Time
The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for
life tests. An estimation is also given at 40°C. The expected failure rate for this capacitor range is based on our periodic test
results for capacitors with structural similarity. Failure rate is frequently quoted in FIT (Failures In Time) where 1 FIT = 1 x 10-9
failures per hour. Failure rate per hour includes both catastrophic and parametric failures.
Failure Rate per Hour
Ta
85°C 250 FIT
40°C 12 FIT
Environmental Compliance
All Part Numbers in this datasheet are Reach and RoHS compliant.
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental
effects of both our capacitors and their production.
In Europe (RoHS Directive) and in some other geographical areas such as China, legislation has been put in place to prevent
the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced
to help our customers' obligations to guarantee their products and fulfill these legislative requirements. The only material of
concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing
less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation worldwide and
make any necessary changes in its products, whenever needed.
Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode
coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels
for RoHS compatible capacitors.
Due to customer requirements, there may appear additional markings such as lead-free (LF), or lead-free wires (LFW) on the
label.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
7
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Table 1 – Ratings & Part Number Reference
VDC
Rated
Capacitance
35
35
35
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
200
200
100 Hz
20°C (µF)
33000
56000
100000
3900
4700
5600
5600
6800
8200
10000
12000
12000
15000
18000
18000
22000
27000
33000
47000
82000
2200
2700
3300
3300
4700
5600
6800
6800
8200
8200
10000
10000
12000
15000
18000
27000
39000
1000
1200
1500
1500
1800
2200
2700
2700
3300
3300
3300
3900
4700
4700
5600
6800
8200
12000
18000
330
390
470
470
VDC
Rated Capacitance
Size Code
Case Size
D x L (mm)
EF
EL
EP
BB
BC
CB
BD
CC
CD
DC
CF
DD
EB
DF
EC
ED
EF
EH
EL
EP
BB
BC
CB
BD
CC
CD
DC
CF
DD
EB
DF
EC
ED
EF
EH
EL
EP
BB
BC
CB
BD
CC
CD
DC
EB
CF
DD
EC
ED
DF
EE
EF
EG
EH
EL
EP
BB
BC
CB
BD
40 x 50
40 x 80
40 x 105
25 x 30
25 x 35
30 x 30
25 x 40
30 x 35
30 x 40
35 x 35
30 x 50
35 x 40
40 x 30
35 x 50
40 x 35
40 x 40
40 x 50
40 x 60
40 x 80
40 x 105
25 x 30
25 x 35
30 x 30
25 x 40
30 x 35
30 x 40
35 x 35
30 x 50
35 x 40
40 x 30
35 x 50
40 x 35
40 x 40
40 x 50
40 x 60
40 x 80
40 x 105
25 x 30
25 x 35
30 x 30
25 x 40
30 x 35
30 x 40
35 x 35
40 x 30
30 x 50
35 x 40
40 x 35
40 x 40
35 x 50
40 x 45
40 x 50
40 x 55
40 x 60
40 x 80
40 x 105
25 x 30
25 x 35
30 x 30
25 x 40
Size Code
Case Size
Ripple Current
100 Hz
85°C (A)
7.16
11.68
14.18
2.33
2.77
2.74
3.14
3.26
3.70
3.69
4.59
4.14
4.42
5.23
4.88
5.81
7.23
8.74
10.96
12.63
2.13
2.43
2.77
2.73
3.24
3.56
3.95
4.07
4.31
3.95
4.85
4.58
5.42
7.02
8.54
10.53
12.23
1.67
1.93
2.30
2.27
2.64
3.05
3.57
3.72
4.05
4.11
4.09
4.88
5.23
5.60
6.41
6.61
7.36
9.14
11.34
1.18
1.36
1.58
1.56
10 kHz
85°C (A)
10.03
12.92
15.39
2.53
3.01
2.98
3.42
3.55
4.03
4.01
4.99
4.50
4.51
5.69
4.97
5.92
7.36
8.91
11.17
13.44
2.37
2.70
3.08
3.04
3.61
3.96
4.40
4.53
4.80
4.03
5.40
4.67
5.55
7.18
8.75
10.78
13.51
2.04
2.36
2.81
2.78
3.23
3.73
4.37
3.88
4.95
5.03
4.24
5.08
6.40
5.83
6.68
6.84
7.61
9.45
12.61
1.63
1.87
2.18
2.15
Ripple Current
ESR
Maximum
Impedance
Maximum
100 Hz
20°C (mΩ)
42
23
17
125
99
115
85
90
77
86
59
75
89
55
78
62
43
33
23
18
149
128
112
112
91
83
75
75
69
82
64
80
64
44
35
24
19
243
203
163
163
137
113
92
121
76
76
106
85
55
70
59
53
44
31
19
486
412
343
343
10 kHz
20°C (mΩ)
38
21
16
103
81
94
70
74
63
71
48
62
79
45
70
56
38
30
21
17
118
101
88
88
72
66
59
59
55
72
51
72
57
39
31
21
17
182
152
122
122
103
85
69
104
57
57
92
74
41
61
51
46
39
27
17
340
288
240
240
ALC10(1)333EF035
ALC10(1)563EL035
ALC10(1)104EP035
ALC10(1)392BB040
ALC10(1)472BC040
ALC10(1)562CB040
ALC10(1)562BD040
ALC10(1)682CC040
ALC10(1)822CD040
ALC10(1)103DC040
ALC10(1)123CF040
ALC10(1)123DD040
ALC10(1)153EB040
ALC10(1)183DF040
ALC10(1)183EC040
ALC10(1)223ED040
ALC10(1)273EF040
ALC10(1)333EH040
ALC10(1)473EL040
ALC10(1)823EP040
ALC10(1)222BB063
ALC10(1)272BC063
ALC10(1)332CB063
ALC10(1)332BD063
ALC10(1)472CC063
ALC10(1)562CD063
ALC10(1)682DC063
ALC10(1)682CF063
ALC10(1)822DD063
ALC10(1)822EB063
ALC10(1)103DF063
ALC10(1)103EC063
ALC10(1)123ED063
ALC10(1)153EF063
ALC10(1)183EH063
ALC10(1)273EL063
ALC10(1)393EP063
ALC10(1)102BB100
ALC10(1)122BC100
ALC10(1)152CB100
ALC10(1)152BD100
ALC10(1)182CC100
ALC10(1)222CD100
ALC10(1)272DC100
ALC10(1)272EB100
ALC10(1)332CF100
ALC10(1)332DD100
ALC10(1)332EC100
ALC10(1)392ED100
ALC10(1)472DF100
ALC10(1)472EE100
ALC10(1)562EF100
ALC10(1)682EG100
ALC10(1)822EH100
ALC10(1)123EL100
ALC10(1)183EP100
ALC10(1)331BB200
ALC10(1)391BC200
ALC10(1)471CB200
ALC10(1)471BD200
ESR
Impedance
Part Number
Part Number
(1) Termination code: See Termination Tables for available options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
8
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Table 1 – Ratings & Part Number Reference cont.
VDC
Rated
Capacitance
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
350
100 Hz
20°C (µF)
560
680
820
820
1000
1000
1000
1200
1200
1500
1500
1800
2200
3300
4700
5600
8200
220
270
330
330
330
470
560
680
680
680
820
820
1000
1000
1200
1200
1500
1800
1800
2200
3900
4700
5600
120
150
180
180
270
330
330
390
390
390
470
470
560
560
680
820
820
820
1000
1200
VDC
Rated Capacitance
Size Code
Case Size
D x L (mm)
CC
CD
DC
EB
CF
DD
EC
DF
ED
DF
EE
EF
EH
EL
EP
FP
KP
BB
BC
CB
BC
BD
CC
CD
DC
CF
EB
DD
ED
DF
EE
DH
EF
EG
DL
EH
EL
EP
FP
KP
BB
BC
BD
CB
CC
CD
EB
CF
DC
EC
DD
ED
DF
EE
EF
DH
EG
EH
DL
EL
30 x 35
30 x 40
35 x 35
40 x 30
30 x 50
35 x 40
40 x 35
35 x 50
40 x 40
35 x 50
40 x 45
40 x 50
40 x 60
40 x 80
40 x 105
45 x 105
50 x 105
25 x 30
25 x 35
30 x 30
25 x 35
25 x 40
30 x 35
30 x 40
35 x 35
30 x 50
40 x 30
35 x 40
40 x 40
35 x 50
40 x 45
35 x 60
40 x 50
40 x 55
35 x 80
40 x 60
40 x 80
40 x 105
45 x 105
50 x 105
25 x 30
25 x 35
25 x 40
30 x 30
30 x 35
30 x 40
40 x 30
30 x 50
35 x 35
40 x 35
35 x 40
40 x 40
35 x 50
40 x 45
40 x 50
35 x 60
40 x 55
40 x 60
35 x 80
40 x 80
Size Code
Case Size
Ripple Current
100 Hz
85°C (A)
1.82
2.10
2.43
3.06
2.76
2.81
3.43
3.06
4.02
3.70
4.61
5.27
6.29
7.83
8.08
8.51
9.17
0.97
1.13
1.33
1.34
1.31
1.67
1.91
2.22
2.29
2.79
2.55
3.80
3.26
4.33
3.76
4.94
5.29
4.60
5.92
7.33
7.78
8.22
8.63
0.83
0.99
1.13
1.11
1.41
1.65
2.02
1.92
1.82
2.33
2.07
2.69
2.80
3.04
3.46
3.40
3.84
3.99
3.90
4.95
10 kHz
85°C (A)
2.51
2.89
3.35
3.63
3.80
3.87
3.99
4.01
4.69
5.10
5.38
6.15
7.43
9.17
11.73
12.16
11.76
1.41
1.65
1.94
1.95
1.91
2.43
2.78
3.23
3.34
3.56
3.72
4.91
4.75
5.58
5.48
6.37
6.58
6.69
7.34
9.49
11.71
12.11
12.03
1.75
2.07
2.37
2.19
2.65
3.07
3.97
3.65
3.07
4.50
3.47
5.22
4.80
5.88
6.65
5.50
7.16
7.67
6.40
9.20
Ripple Current
ESR
Maximum
Impedance
Maximum
100 Hz
20°C (mΩ)
288
238
198
178
163
163
153
135
124
110
101
84
67
46
45
42
33
727
593
486
490
486
343
288
238
238
187
198
153
163
126
140
104
89
100
74
57
46
42
38
1139
912
761
776
527
432
424
364
386
361
321
299
268
251
207
190
174
172
154
119
10 kHz
20°C (mΩ)
202
167
139
142
114
114
124
82
99
77
81
68
53
37
32
29
25
473
385
316
320
316
223
187
155
155
144
129
116
106
96
100
80
69
82
58
43
32
29
27
736
589
492
506
346
284
277
238
259
236
216
195
180
164
136
130
114
112
104
78
ALC10(1)561CC200
ALC10(1)681CD200
ALC10(1)821DC200
ALC10(1)821EB200
ALC10(1)102CF200
ALC10(1)102DD200
ALC10(1)102EC200
ALC10(1)122DF200
ALC10(1)122ED200
ALC10(1)152DF200
ALC10(1)152EE200
ALC10(1)182EF200
ALC10(1)222EH200
ALC10(1)332EL200
ALC10(1)472EP200
ALC10(1)562FP200
ALC10(1)822KP200
ALC10(1)221BB250
ALC10(1)271BC250
ALC10(1)331CB250
ALC10(1)331BC250
ALC10(1)331BD250
ALC10(1)471CC250
ALC10(1)561CD250
ALC10(1)681DC250
ALC10(1)681CF250
ALC10(1)681EB250
ALC10(1)821DD250
ALC10(1)821ED250
ALC10(1)102DF250
ALC10(1)102EE250
ALC10(1)122DH250
ALC10(1)122EF250
ALC10(1)152EG250
ALC10(1)182DL250
ALC10(1)182EH250
ALC10(1)222EL250
ALC10(1)392EP250
ALC10(1)472FP250
ALC10(1)562KP250
ALC10(1)121BB350
ALC10(1)151BC350
ALC10(1)181BD350
ALC10(1)181CB350
ALC10(1)271CC350
ALC10(1)331CD350
ALC10(1)331EB350
ALC10(1)391CF350
ALC10(1)391DC350
ALC10(1)391EC350
ALC10(1)471DD350
ALC10(1)471ED350
ALC10(1)561DF350
ALC10(1)561EE350
ALC10(1)681EF350
ALC10(1)821DH350
ALC10(1)821EG350
ALC10(1)821EH350
ALC10(1)102DL350
ALC10(1)122EL350
ESR
Impedance
Part Number
Part Number
(1) Termination code: See Termination Tables for available options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
9
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Table 1 – Ratings & Part Number Reference cont.
VDC
Rated
Capacitance
350
350
350
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
100 Hz
20°C (µF)
1800
2700
3300
100
120
150
150
180
220
220
270
270
330
330
330
330
390
390
470
470
470
470
560
560
560
680
680
820
1000
1000
1500
2200
2700
68
100
120
120
150
150
150
180
220
220
220
270
270
270
270
330
330
330
330
390
390
470
470
470
560
560
680
VDC
Rated Capacitance
Size Code
Case Size
D x L (mm)
EP
FP
KP
BB
BC
CB
BD
CC
CC
CD
DC
EB
DC
CF
DD
EC
DF
ED
DE
DF
ED
EE
DF
DH
EF
DH
EH
DL
DL
EL
EP
FP
KP
BB
BC
CB
BD
BD
CB
CC
CD
DC
CF
EB
CF
DC
DD
EC
CF
DD
DF
ED
DF
EE
DF
DH
EF
DF
EH
DL
40 x 105
45 x 105
50 x 105
25 x 30
25 x 35
30 x 30
25 x 40
30 x 35
30 x 35
30 x 40
35 x 35
40 x 30
35 x 35
30 x 50
35 x 40
40 x 35
35 x 50
40 x 40
35 x 45
35 x 50
40 x 40
40 x 45
35 x 50
35 x 60
40 x 50
35 x 60
40 x 60
35 x 80
35 x 80
40 x 80
40 x 105
45 x 105
50 x 105
25 x 30
25 x 35
30 x 30
25 x 40
25 x 40
30 x 30
30 x 35
30 x 40
35 x 35
30 x 50
40 x 30
30 x 50
35 x 35
35 x 40
40 x 35
30 x 50
35 x 40
35 x 50
40 x 40
35 x 50
40 x 45
35 x 50
35 x 60
40 x 50
35 x 50
40 x 60
35 x 80
Size Code
Case Size
Ripple Current
100 Hz
85°C (A)
6.14
7.00
7.54
0.77
0.90
1.04
1.06
1.20
1.31
1.41
1.61
1.85
1.73
1.82
1.84
2.29
2.19
2.62
2.40
2.62
2.74
3.00
2.57
3.01
3.41
2.90
3.99
3.70
3.98
5.00
5.79
6.56
7.11
0.69
0.88
1.00
1.01
1.12
1.10
1.17
1.36
1.56
1.61
1.77
1.76
1.68
1.78
2.07
1.91
2.20
2.41
2.47
2.60
2.70
2.43
2.95
3.08
2.70
3.56
3.61
10 kHz
85°C (A)
10.73
11.44
11.57
1.60
1.87
2.03
2.18
2.36
2.47
2.74
2.88
3.67
2.92
3.42
3.27
4.21
3.96
4.86
4.10
4.41
5.21
5.49
4.04
5.11
6.19
4.73
7.14
6.09
6.32
8.82
10.16
10.90
11.13
1.50
1.90
2.03
2.18
2.35
2.12
2.38
2.76
2.89
3.27
3.68
3.43
2.91
3.27
4.22
3.54
3.68
4.38
4.91
4.41
5.53
4.03
5.12
6.25
4.74
7.04
6.09
Ripple Current
ESR
Maximum
Impedance
Maximum
100 Hz
20°C (mΩ)
81
63
54
1400
1166
950
935
791
650
648
547
441
461
438
449
378
377
312
360
321
230
258
278
264
216
232
177
181
112
120
99
77
66
1708
1167
989
973
785
805
792
661
559
540
517
446
470
458
427
373
364
373
348
240
293
252
270
243
266
202
190
10 kHz
20°C (mΩ)
54
42
36
943
785
645
630
536
400
440
376
284
320
299
309
252
226
203
246
223
156
168
180
184
141
142
114
127
77
78
68
53
45
1135
777
663
648
524
543
531
443
379
362
311
301
322
311
259
253
242
253
210
166
177
155
185
147
172
121
131
ALC10(1)182EP350
ALC10(1)272FP350
ALC10(1)332KP350
ALC10(1)101BB400
ALC10(1)121BC400
ALC10(1)151CB400
ALC10(1)151BD400
ALC10(1)181CC400
ALC10(1)221CC400
ALC10(1)221CD400
ALC10(1)271DC400
ALC10(1)271EB400
ALC10(1)331DC400
ALC10(1)331CF400
ALC10(1)331DD400
ALC10(1)331EC400
ALC10(1)391DF400
ALC10(1)391ED400
ALC10(1)471DE400
ALC10(1)471DF400
ALC10(1)471ED400
ALC10(1)471EE400
ALC10(1)561DF400
ALC10(1)561DH400
ALC10(1)561EF400
ALC10(1)681DH400
ALC10(1)681EH400
ALC10(1)821DL400
ALC10(1)102DL400
ALC10(1)102EL400
ALC10(1)152EP400
ALC10(1)222FP400
ALC10(1)272KP400
ALC10(1)680BB450
ALC10(1)101BC450
ALC10(1)121CB450
ALC10(1)121BD450
ALC10(1)151BD450
ALC10(1)151CB450
ALC10(1)151CC450
ALC10(1)181CD450
ALC10(1)221DC450
ALC10(1)221CF450
ALC10(1)221EB450
ALC10(1)271CF450
ALC10(1)271DC450
ALC10(1)271DD450
ALC10(1)271EC450
ALC10(1)331CF450
ALC10(1)331DD450
ALC10(1)331DF450
ALC10(1)331ED450
ALC10(1)391DF450
ALC10(1)391EE450
ALC10(1)471DF450
ALC10(1)471DH450
ALC10(1)471EF450
ALC10(1)561DF450
ALC10(1)561EH450
ALC10(1)681DL450
ESR
Impedance
Part Number
Part Number
(1) Termination code: See Termination Tables for available options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
10
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Table 1 – Ratings & Part Number Reference cont.
VDC
Rated
Capacitance
450
450
450
450
450
450
450
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
600
600
600
600
600
100 Hz
20°C (µF)
820
1000
1000
1200
1500
1800
2200
56
68
82
82
100
100
120
150
180
180
180
220
220
270
270
330
330
390
390
470
560
680
680
1000
1500
1800
56
68
82
82
120
150
180
180
220
270
330
470
180
220
270
330
390
470
680
1000
1200
1500
47
56
82
82
100
VDC
Rated Capacitance
Size Code
Case Size
D x L (mm)
EL
EL
EJ
EP
EP
FP
KP
BB
BC
BD
CB
CB
CC
CC
CD
CF
DC
EB
DD
EC
DF
ED
DF
EE
DH
EF
EH
DL
DL
EL
EP
FP
KP
BB
BC
BD
CB
CC
CD
CF
DC
DD
DF
DH
DL
EB
EC
ED
EE
EF
EH
EL
EP
FP
KP
BB
BC
BD
CB
CC
40 x 80
40 x 80
40 X 70
40 x 105
40 x 105
45 x 105
50 x 105
25 x 30
25 x 35
25 x 40
30 x 30
30 x 30
30 x 35
30 x 35
30 x 40
30 x 50
35 x 35
40 x 30
35 x 40
40 x 35
35 x 50
40 x 40
35 x 50
40 x 45
35 x 60
40 x 50
40 x 60
35 x 80
35 x 80
40 x 80
40 x 105
45 x 105
50 x 105
25 X 30
25 X 35
25 X 40
30 X 30
30 X 35
30 X 40
30 X 50
35 X 35
35 X 40
35 X 50
35 X 60
35 X 80
40 X 30
40 X 35
40 X 40
40 X 45
40 X 50
40 X 60
40 X 80
40 X 105
45 X 105
50 X 105
25 X 30
25 X 35
25 X 40
30 X 30
30 X 35
Size Code
Case Size
Ripple Current
100 Hz
85°C (A)
4.47
4.95
4.42
5.57
5.77
6.27
6.81
0.74
0.87
1.00
0.99
1.08
1.15
1.25
1.48
1.78
1.70
1.76
1.96
2.07
2.34
2.41
2.14
2.74
2.87
3.09
3.56
3.50
3.65
4.40
5.43
5.97
6.45
0.68
0.77
0.87
0.91
1.14
1.32
1.52
1.50
1.72
2.01
2.30
2.87
1.60
1.84
2.11
2.40
2.67
3.05
3.87
4.86
5.60
6.50
0.69
0.81
1.01
1.03
1.19
10 kHz
85°C (A)
8.78
9.32
8.42
10.15
10.50
10.87
11.12
1.44
1.70
1.95
1.84
1.94
2.16
2.28
2.67
3.27
2.84
3.22
3.26
3.82
3.97
4.42
3.75
5.00
4.67
5.59
6.43
5.57
6.45
7.77
9.18
9.76
10.09
1.13
1.29
1.46
1.49
1.86
2.14
2.47
2.34
2.67
3.15
3.60
4.43
2.62
3.01
3.44
3.90
4.33
4.93
6.18
7.59
8.59
9.63
1.44
1.93
2.36
2.27
2.63
Ripple Current
ESR
Maximum
Impedance
Maximum
100 Hz
20°C (mΩ)
138
114
142
103
96
82
70
2365
1816
1507
1527
1000
1220
1052
895
699
728
699
622
571
505
466
492
405
355
345
285
250
244
200
140
110
94
6118
5038
4178
4196
2874
2302
1914
1940
1588
1290
1058
746
1936
1584
1290
1056
894
742
514
352
296
242
2707
2270
1556
1577
1291
10 kHz
20°C (mΩ)
83
75
93
70
62
55
47
1642
1351
1120
1140
765
840
786
631
522
549
522
450
426
362
348
366
286
258
242
201
182
178
140
98
82
70
5330
4388
3640
3656
2506
2008
1670
1694
1388
1126
924
650
1688
1380
1124
920
780
648
450
308
258
212
1867
1565
1074
1094
895
ALC10(1)821EL450
ALC10(1)102EL450
ALC10(1)102EJ450
ALC10(1)122EP450
ALC10(1)152EP450
ALC10(1)182FP450
ALC10(1)222KP450
ALC10(1)560BB500
ALC10(1)680BC500
ALC10(1)820BD500
ALC10(1)820CB500
ALC10(1)101CB500
ALC10(1)101CC500
ALC10(1)121CC500
ALC10(1)151CD500
ALC10(1)181CF500
ALC10(1)181DC500
ALC10(1)181EB500
ALC10(1)221DD500
ALC10(1)221EC500
ALC10(1)271DF500
ALC10(1)271ED500
ALC10(1)331DF500
ALC10(1)331EE500
ALC10(1)391DH500
ALC10(1)391EF500
ALC10(1)471EH500
ALC10(1)561DL500
ALC10(1)681DL500
ALC10(1)681EL500
ALC10(1)102EP500
ALC10(1)152FP500
ALC10(1)182KP500
ALC10(1)560BB550
ALC10(1)680BC550
ALC10(1)820BD550
ALC10(1)820CB550
ALC10(1)121CC550
ALC10(1)151CD550
ALC10(1)181CF550
ALC10(1)181DC550
ALC10(1)221DD550
ALC10(1)271DF550
ALC10(1)331DH550
ALC10(1)471DL550
ALC10(1)181EB550
ALC10(1)221EC550
ALC10(1)271ED550
ALC10(1)331EE550
ALC10(1)391EF550
ALC10(1)471EH550
ALC10(1)681EL550
ALC10(1)102EP550
ALC10(1)122FP550
ALC10(1)152KP550
ALC10(1)470BB600
ALC10(1)560BC600
ALC10(1)820BD600
ALC10(1)820CB600
ALC10(1)101CC600
ESR
Impedance
Part Number
Part Number
(1) Termination code: See Termination Tables for available options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
11
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Table 1 – Ratings & Part Number Reference cont.
VDC
Rated
Capacitance
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
100 Hz
20°C (µF)
120
150
150
180
220
270
390
150
180
220
270
330
390
560
820
1000
1000
1200
VDC
Rated Capacitance
Size Code
Case Size
D x L (mm)
CD
CF
DC
DD
DF
DH
DL
EB
EC
ED
EE
EF
EH
EL
EP
FP
KL
KP
30 X 40
30 X 50
35 X 35
35 X 40
35 X 50
35 X 60
35 X 80
40 X 30
40 X 35
40 X 40
40 X 45
40 X 50
40 X 60
40 X 80
40 X 105
45 X 105
50 X 80
50 X 105
Size Code
Case Size
Ripple Current
100 Hz
85°C (A)
1.35
1.60
1.56
1.77
2.09
2.41
3.01
1.67
1.91
2.18
2.48
2.81
3.19
4.04
5.00
5.74
5.69
6.57
10 kHz
85°C (A)
2.99
3.57
3.11
3.54
4.27
4.87
5.90
3.74
4.30
4.90
5.51
6.15
6.95
8.57
10.10
10.99
10.33
11.96
Ripple Current
ESR
Maximum
Impedance
Maximum
100 Hz
20°C (mΩ)
1076
859
884
736
599
490
342
869
723
592
483
397
336
236
163
136
140
117
10 kHz
20°C (mΩ)
746
595
618
515
418
342
120
600
499
409
334
274
232
163
113
95
98
82
ALC10(1)121CD600
ALC10(1)151CF600
ALC10(1)151DC600
ALC10(1)181DD600
ALC10(1)221DF600
ALC10(1)271DH600
ALC10(1)391DL600
ALC10(1)151EB600
ALC10(1)181EC600
ALC10(1)221ED600
ALC10(1)271EE600
ALC10(1)331EF600
ALC10(1)391EH600
ALC10(1)561EL600
ALC10(1)821EP600
ALC10(1)102FP600
ALC10(1)102KL600
ALC10(1)122KP600
ESR
Impedance
Part Number
Part Number
(1) Termination code: See Termination Tables for available options.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
12
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Mechanical Data
Polarity and Reversed Voltage
Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such,
they are polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil. If this were
to be reversed, then the electrolytic process that took place in forming the oxide layer on the anode would be recreated in
trying to form an oxide layer on the cathode. In forming the cathode foil in this way, heat would be generated and gas given
off within the capacitor, usually leading to catastrophic failure.
The cathode foil already possesses a thin stabilized oxide layer. This thin oxide layer is equivalent to a forming voltage
of approximately 2 V. As a result, the capacitor can withstand a voltage reversal of up to 2 V for short periods. Above this
voltage, the formation process will commence. Aluminium Electrolytic capacitors can also be manufactured for use in
intermittent AC applications by using two anode foils in place of one anode and one cathode.
Mounting Position
The capacitor can be mounted upright or inclined to a horizontal position.
Insulating Resistance
≥ 100 MΩ at 100 VDC across insulating sleeve.
UL recognized sleeving is available for custom parts in this range, upon request (UL No. E358957).
Voltage Proof
≥ 2,500 VDC across insulating sleeve.
Safety Vent
A safety vent for overpressure is featured on either the base (opposing end to the terminals) or the side of the can. This
appears in the form of a grooved section on the surface of the can, which is a weakened area and designed to relieve buildup of internal pressure due to overstress or catastrophic failure.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
13
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Marking
KEMET Logo
Rated Capacitance,
Capacitance Tolerance
Rated Voltage (VDC)
Series, Capacitance
Code, Voltage Code
Climatic Category
Date of Manufacture,
Batch Number
Made in the
European Union
Polarity Stripe (−)
Construction
Detailed Cross Section
Termination Pin
Insulating End Disc
Polarity Stripe (−)
Aluminum Can
with Safety Vent
Rubber Seal
Tab Connection
to Terminal
Margin
Wound
Element Tabs
Aluminum Can
Insulating Sleeve
Insulating Sleeve
Rubber Seal
Paper Spacer Impregnated
with Electrolyte
(First Layer)
Cathode Aluminum Foil,
Etched (Second Layer)
Termination Pin (−)
Termination Pin (+)
Paper Spacer Impregnated Anode Aluminum Foil, Etched,
Covered with Aluminum Oxide
with Electrolyte
(Fourth Layer)
(Third Layer)
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
14
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
Construction Data
The manufacturing process begins with the anode foil being
electrochemically etched to increase the surface area and then
“formed” to produce the aluminum oxide layer. Both the anode and
cathode foils are then interleaved with absorbent paper and wound
into a cylinder. During the winding process, aluminum tabs are
attached to each foil to provide the electrical contact.
Extended cathode
Anode foil
The deck, complete with terminals, is attached to the tabs and then
folded down to rest on top of the winding. The complete winding
is impregnated with electrolyte before being housed in a suitable
container, usually an aluminum can, and sealed. Throughout the
process, all materials inside the housing must be maintained at the
highest purity and be compatible with the electrolyte.
Each capacitor is aged and tested before being sleeved and packed.
The purpose of aging is to repair any damage in the oxide layer
and thus reduce the leakage current to a very low level. Aging is
normally carried out at the rated temperature of the capacitor and
is accomplished by applying voltage to the device while carefully
controlling the supply current. The process may take several hours to
complete.
Damage to the oxide layer can occur due to variety of reasons:
• Slitting of the anode foil after forming
• Attaching the tabs to the anode foil
• Minor mechanical damage caused during winding
A sample from each batch is taken by the quality department after
completion of the production process. This sample size is controlled
by the use of recognized sampling tables defined in BS 6001.
The following tests are applied and may be varied at the request
of the customer. In this case the batch, or special procedure, will
determine the course of action.
Electrical:
• Leakage current
• Capacitance
• ESR
• Impedance
• Tan Delta
Mechanical/Visual:
• Overall dimensions
• Torque test of mounting stud
• Print detail
• Box labels
• Packaging, including packed
quantity
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Foil tabs
Tissues
Cathode foil
Etching
Forming
Winding
Decking
Impregnation
Assembly
Aging
Testing
Sleeving
Packing
A4020_ALC10 • 2/17/2021
15
Snap-In Aluminum Electrolytic Capacitors – ALC10, +85ºC
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offices, please visit www.kemet.com/sales.
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
A4020_ALC10 • 2/17/2021
16
工商网监
湘ICP备2023018690号
