C1206C275M4RAC

New Product Bulletin Surface Mount Ceramic Chip Capacitors X7R Dielectric X7R/1206 - 2.7 µF (275) - 6.8 µF (685) @ 16 Volts Outline Drawing Table 1 Dimensions - Millimeters (Inches) Metric EIA Size Size Code Code 3216 1206 L - Length 3.2 (.126) ± 0.2 (.008) W - Width 1.6 (.063) ± 0.2 (.008) Max. T - Thickness See Table 2 B - Bandwidth 0.5 (.02) ± 0.25 (.010) Separation N/A Table 2 - X7R - Capacitance Value Extensions Capacitance Values (µF) 2.7 3.3 3.9 4.7 5.6 6.8 KEMET Part Number C1206C275(1)4RAC C1206C335(1)4RAC C1206C395(1)4RAC C1206C475(1)4RAC C1206C565(1)4RAC C1206C685(1)4RAC Capacitance Tolerance K,M K,M K,M K,M K,M K,M Thickness mm 0.95 ± 0.1 1.0 ± 0.1 1.15 ± 0.15 1.25 ± 0.15 1.6 ± 0.2 1.6 ± 0.2 Qty 7” Reel 4,000 2,500 2,500 2,500 2,000 2,000 Qty 13” Reel 10,000 10,000 10,000 10,000 8,000 8,000 (1) To complete KEMET part number, insert the alpha code for tolerance desired. K = ±10%; M = ±20% Electrical Parameters As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements based on room temperature (25°C) parameters: • Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range • Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 500 megohm-microfarads. • Capacitance and Dissipation Factor (DF) measured at 1KHz at 1.0Vrms. DF Limit for 6.3 and 10 volts is 5.0%. DF for 16 volt is 3.5%. Soldering Process The 1206 components are suitable for reflow and wave soldering. All parts incorporate the standard KEMET barrier layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to leaching. Marking These chips are normally supplied unmarked. If required, they can be laser marked as an extra cost option. More detail on the marking format is included in our Surface Mount Catalog F3102. In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog.