C44UOGT7400M35K

Aluminum Can Power Film Capacitors C44U-M, 600 – 1,800 VDC, for DC Link Overview Applications The C44U-M series is a polypropylene metallized film capacitor with a cylindrical, aluminium can-type design filled with resin. It uses screw terminals and a plastic deck. Typical applications include DC filtering and energy storage. Benefits • Controlled self-healing • Low loss • High ripple current • High capacitance density • Long lifetime Part Number System C4 4 U Series C4 = MKP 4= U= Capacitors Cylindrical DC for Power types Link Applications Q G DC Voltage Case and Fixing H = 600 V O = 900 V Q = 1,100 V U = 1,300 V S = 1,500 V V = 1,800 V G = Cylindrical case with threaded bolt M12 E = Cylindrical case without threaded bolt T 6 2 4 0 M 8 1 K Variants Case Diameter Case Height Tolerance Digits nine, ten, and eleven M = Standard 8 = 85 mm 5 = 116 mm indicate the first three digits N . . . Z = 3 = 136 mm of capacitance value. Digit Special 8 indicates the number of zeros to be added. 1...Z Terminals Code Capacitance Code (pF) T = M6 female terminals Q = M8 male terminals Y = M8 female terminals (#) J = ±5% K = ±10% # For configuration female terminals M8 the height H1 has to be increased of 2 mm. It is not possible to manufacture every part number that can be created from the coding description. Please refer to the table of standard part numbers above and contact KEMET for other possibilities. Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3119_C44U_M • 9/21/2023 1 Aluminum Can Power Film Capacitors C44U-M, 600 – 1,800 VDC, for DC Link Dimensions – Millimeters Style 1: D = 85 mm 12 26 M6x10 D1 +0.5/-0 D +2/-0 S±0.3 M12x16 H ±2 H1 ±2 Style 2: D = 116 mm and 136 mm 15 26 M6x10 D1 +0.5/-0 S±0.3 13 D +2/-0 18.3 M12x16 H ±2 H1 ±2 D D1 H H1 S +2/−0 +0.5/−0 ±2 ±2 85 85 85 85 85 85 85 116 116 116 116 136 136 136 136 88 88 88 88 88 88 88 119 119 119 119 139 139 139 139 99.5 114.5 124.5 134.5 144.5 178.5 268.5 133 153 233 273 131 232 282 347 101 116 126 136 146 180 270 136 156 236 276 134 235 285 350 ±0.3 Threaded Insert Terminations Threaded Post Terminations Mounting Stud 32 32 32 32 32 32 32 50 50 50 50 50 50 50 50 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M6 x 10 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M8 x 20 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 M12 x 16 Maximum Driving Torque [Nm] Terminals Bolt M12 Female M6 4 Male M8 7 12 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3119_C44U_M • 9/21/2023 2 Aluminum Can Power Film Capacitors C44U-M, 600 – 1,800 VDC, for DC Link Qualifications Reference Standards Climatic Category IEC 61071 - EN61071 - VDE0560 – UL810 Construction only 40/85/21 according to IEC 60068-1 General Technical Data Dielectric Application Special features Climatic Category Endurance test Polypropylene Metallized Film, non-inductive type, self-healing property DC Filtering/DC Link UL 810 Construction Only qualified - E208772 40/85/21 IEC 60068–1 500 hours + 500 hours at 1.3 x VNDC and 70°C Maximum THS, Ø ≤ 116 mm 85°C Maximum THS, Ø = 136 mm 75°C Standard IEC 61071 - EN61071 - VDE0560 – UL810 Construction only Aluminium case with or without, threaded bolt M12 Protection Installation Leads Packaging RoHS Compliant Plastic deck flame retardant execution UL 94 V–0 Plastic cap flame retardant execution UL 94 V–0 Thermosetting resin sealing Any position High current M6 or M8 terminals Packed in cardboard boxes with protection for the terminals Compliant with Directive 2002/95/EC and Directive 2011/65/ EU of the European Parliament and of the Council on 8 June 2011, including Commission Delegated Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU. Electrical Characteristics Capacitance Tolerance ±10% at +25°C ±5°C Dissipation Factor (DF) ≤ 0.0002 at 10 kHz with T = 25°C ±5°C Surge Voltage Over-Voltage (IEC 61071) Peak Non-Repetitive Current Insulation Resistance Capacitance Deviation in Operation Storage Temperature Permissible Relative Humidity Storage 1.5 x VNDC for maximum 10 times in lifetime at +25°C ±5°C 1.15 x VNDC for maximum 30 minutes, once per day 1.3 x VNDC for maximum 1 minutes, once per day 1.5 x Ipkr maximum 1,000 times in lifetime IR x C ≥ 30,000 seconds at 100 VDC 1 minute at +25°C ±5°C ±1.5% maximum on capacitance value measured at +25°C Diameter 85 and 116 mm: −40 to +85°C Diameter = 136 mm: −40 to 75°C Annual average ≤ 70%; 85% on 30 days/year randomly distributed throughout the year. Dewing not admissible. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3119_C44U_M • 9/21/2023 3 Aluminum Can Power Film Capacitors C44U-M, 600 – 1,800 VDC, for DC Link Life Expectancy Life expectancy ≥ 200.000 hours (1) Capacitance drop at end of life −10% (typical) Failure rate IEC 61709 50 FIT at VNDC at Hot-Spot temperature THS = 70°C (see FIT curves) Test Method Test voltage between terminals 1.5 x VNDC for 10 seconds or 1.65 x VNDC for 2 seconds at 25°C Test voltage between terminals and case 4.0 kVAC 50 Hz for 2 seconds Damp Heat IEC 60068-2-78 Change of temperature IEC 60068-2-14 Vibration strength IEC 60068-2-6 (1): ≥ 100,000 hours at VNDC at Hot-Spot temperature THS = 70°C Lifetime Expectancy/Failure Quota Graphs Lifetime Curve & FIT at Hot Spot Temperature 1,000,000 100,000 100,000 10,000 10,000