C4ATDBU4330A30J

Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Overview Applications The C4AT capacitor is a polypropylene metallized film capacitor with a rectangular, plastic box-type design filled with resin, and uses 2 or 4 tinned copper wires. Typical applications include clamping, DC filtering, blocking, coupling/decoupling, AC harmonic filtering, and energy storage. Benefits • Self-healing • Low loss • High ripple current • High contact reliability • Suitable for high frequency applications Part Number System C4 AT D B U 4100 A3 0 J Series Type Rated Voltage (VDC) Case Number of Leads Capacitance Code (pF) Lead Diameter (mm) Size Code Tolerance C4 = MKP Capacitors AT = Radial box, switching application Digits 2-4 indicate the first three digits of the capacitance value. First digit indicates the number of zeros to be added. A1 = 0.8 A3 = 1.2 D = 250 F = 400 G = 450 H = 600 J = 700 M = 850 B = Plastic box with thermosetting resin sealing U = 2 lead W = 4 lead See Dimension Table J = 5% K = 10% Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 1 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Dimensions – Millimeters T T L H S LL F 0.5 0.5 S1 p p p1 2-pin 4-pin Size Code S S1 ±0.4 ±0.4 T H L LL Nominal Tolerance Nominal Tolerance Nominal Tolerance +0/−2 10 +0/−0.7 20 +0/−0.7 32 +0/−0.7 6 A 27.5 B 27.5 5.1 13 +0/−0.7 22 +0/−0.7 32 +0/−0.7 6 C 27.5 5.1 14 +0/−0.7 28 +0/−0.7 32 +0/−0.7 6 E 27.5 5.1 18 +0/−0.7 33 +0/−0.7 32 +0/−0.7 6 G 27.5 10.2 22 +0/−0.7 37 +0/−0.7 32 +0/−0.7 6 F 37.5 10.2 20 +0/−0.7 40 +0/−0.7 41.5 +0/−0.7 6 H 37.5 10.2 24 +0/−0.7 44 +0/−0.7 41.5 +0/−0.7 6 J 37.5 10.2 28 +0/−0.7 37 +0/−0.7 42.5 +0/−0.7 6 L 37.5 20.3 30 +0/−0.7 45 +0/−0.7 42 +0/−0.7 6 M 52.5 20.3 30 +0/−0.7 45 +0/−0.7 57.5 +0/−0.7 6 N 52.5 20.3 35 +0/−0.7 50 +0/−0.7 57.5 +0/−0.7 6 Note 1: 250 V capacitors use a size code of "0" for all case sizes. Note 2: Wire diameter (F): See Table "Part Numbers". Qualifications Reference Standards Climatic Category IEC 61071, EN61071, VDE0560 40/85/56 according to IEC 60068–1 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 2 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Performance Characteristics Temperature Range Maximum Permissible Ambient Temperature Capacitance Tolerance IEC Climatic Category Peak Non-Repetitive Maximum Current Test Voltage Terminal to Terminal VTT Test Voltage Terminal to Case VTC Dissipation Factor (DF) Acceptable Relative Humidity Capacitance Deviation in Operating Temperature Range of −40°C to +85°C Change of Capacitance vs. Operating Time Case Components Terminals Installation Life Expectancy Failure Quota −40°C to + 85°C +70°C ±5%, ±10% 40/85/56 according to IEC 68–1 I PKR x 1.5 2 Vn for 10 seconds 3k V – 50 Hz for 60 seconds ≥ 5 x 10−4 at 1 kHz and 20°C Annual average ≤ 70% ≤ 85% for ≤ 30 intermittant days annually Dewing not admissible ±1.5% maximum on capacitance value measured at +20°C −3% after 30,000 hours at VRMS or after 100,000 hours at Vn Solvent-resistant plastic case with epoxy resin sealing, flame retardant execution (UL Class 94V–0) Tinned copper 2 or 4 wires Any position ≥ 30,000 hours at VRMS , ≥ 100,000 hours at Vn 300/109 components per hour Environmental Compliance As a leading global supplier of electronic components and an environmentally conscious company, KEMET continually aspires to improve the environmental effects of our manufacturing processes and our finished electronic components. In Europe (RoHS Directive) and in some other geographical areas such as China (China RoHS), legislation has been enacted to prevent or otherwise limit the use of certain hazardous materials, including lead (Pb), in electronic equipment. KEMET monitors legislation globally to ensure compliance and endeavors to adjust our manufacturing processes and/or electronic components as may be required by applicable law. For military, medical, automotive, and some commercial applications, the use of lead (Pb) in the termination is necessary and/or required by design. KEMET is committed to communicating RoHS compliance to our customers. Information related to RoHS compliance will be provided in data sheets and using specific identifiers on the packaging labels. All KEMET power film capacitors are RoHS compliant. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 3 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Table 1A – Ratings & Part Number Reference Part Number Cap Value (µF) VDC VAC Peak VDC Size Code C4ATDBU4100(2)0(3) C4ATDBU4220(2)0(3) C4ATDBU4330(2)0(3) C4ATDBU4500(2)0(3) C4ATDBW5100(2)0(3) C4ATDBW5200(2)0(3) C4ATDBW5300(2)0(3) C4ATDBW5400(2)0(3) C4ATDBW5500(2)0(3) C4ATDBW5600(2)0(3) C4ATFBU4100(2)A(3) C4ATFBU4150(2)A(3) C4ATFBU4200(2)B(3) C4ATFBW4330(2)C(3) C4ATFBW4400(2)E(3) C4ATFBW4500(2)E(3) C4ATFBW4680(2)G(3) C4ATFBW5100(2)F(3) C4ATFBW5150(2)J(3) C4ATFBW5200(2)L(3) C4ATFBW5250(2)M(3) C4ATFBW5300(2)M(3) C4ATFBW5350(2)N(3) C4ATFBW5400(2)N(3) C4ATGBU4100(2)A(3) C4ATGBW4330(2)E(3) C4ATGBW4680(2)G(3) C4ATGBW5100(2)F(3) C4ATGBW5150(2)L(3) C4ATGBW5200(2)M(3) C4ATGBW5330(2)N(3) C4ATHBU3680(2)A(3) C4ATHBU4100(2)B(3) C4ATHBW4200(2)E(3) C4ATHBW4220(2)E(3) C4ATHBW4330(2)G(3) C4ATHBW4470(2)F(3) C4ATHBW4500(2)F(3) C4ATHBW4680(2)J(3) C4ATHBW4900(2)L(3) C4ATHBW5100(2)L(3) C4ATHBW5120(2)M(3) C4ATHBW5200(2)N(3) C4ATJBU3470(2)A(3) C4ATJBW4100(2)D(3) C4ATJBW4150(2)E(3) C4ATJBW4220(2)E(3) C4ATJBW4300(2)G(3) C4ATJBW4500(2)L(3) C4ATJBW4900(2)M(3) C4ATJBW5100(2)M(3) C4ATJBW5150(2)N(3) C4ATMBU3220(2)A(3) C4ATMBU3470(2)B(3) C4ATMBW4100(2)E(3) C4ATMBW4150(2)G(3) C4ATMBW4330(2)J(3) C4ATMBW4470(2)L(3) C4ATMBW4680(2)M(3) C4ATMBW5100(2)N(3) 1 2.2 3.3 5 10 20 30 40 50 60 1 1.5 2 3.3 4 5 6.8 10 15 20 25 30 35 40 1 3.3 6.8 10 15 20 33 0.68 1 2 2.2 3.3 4.7 5 6.8 9 10 12 20 0.47 1 1.5 2.2 3 5 9 10 15 0.22 0.47 1 1.5 3.3 4.7 6.8 10 250 250 250 250 250 250 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 600 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700 700 700 850 850 850 850 850 850 850 850 160 160 160 160 160 160 160 160 160 160 250 250 250 250 250 250 250 250 250 250 250 250 250 250 275 275 275 275 275 275 275 350 350 350 350 350 350 350 350 350 350 350 350 400 400 400 400 400 400 400 400 400 450 450 450 450 450 450 450 450 400 400 400 400 400 400 400 400 400 400 600 600 600 600 600 600 600 600 600 600 600 600 600 600 660 660 660 660 660 660 660 800 800 800 800 800 800 800 800 800 800 800 800 1000 1000 1000 1000 1000 1000 1000 1000 1000 1200 1200 1200 1200 1200 1200 1200 1200 0 0 0 0 0 0 0 0 0 0 A A B C E E G F J L M M N N A E G F L M N A B E E G F F J L L M N A D E E G L M M N A B E G J L M N Part Number Cap Value (µF) VDC VAC Peak VDC Size Code (2) Lead Diameter: A1 = 0.8, A3 = 1.2 Maximum Dimensions (mm) S 27.5 27.5 27.5 27.5 27.5 37.5 37.5 52.5 52.5 52.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 27.5 27.5 27.5 37.5 37.5 52.5 52.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 27.5 27.5 27.5 27.5 27.5 37.5 52.5 52.5 52.5 27.5 27.5 27.5 27.5 37.5 37.5 52.5 52.5 S S1 T H 10 20 10 20 13 22 14 28 5.1 18 33 10.2 28 37 20.3 30 45 20.3 30 45 20.3 35 50 20.3 35 50 10 20 10 20 13 22 5.1 14 28 5.1 18 33 5.1 18 33 10.2 22 37 10.2 20 40 10.2 28 37 20.3 30 45 20.3 30 45 20.3 30 45 20.3 35 50 20.3 35 50 10 20 5.1 18 33 10.2 22 37 10.2 20 40 20.3 30 45 20.3 30 45 20.3 35 50 10 20 13 22 5.1 18 33 18 33 5.1 10.2 22 37 10.2 20 40 10.2 20 40 10.2 28 37 20.3 30 45 20.3 30 45 20.3 30 45 20.3 35 50 10 20 5.1 15 24.5 5.1 18 33 5.1 18 33 10.2 22 37 10.2 28 37 20.3 30 45 20.3 30 45 20.3 35 50 10 20 13 22 5.1 18 33 10.2 22 37 10.2 28 37 20.3 30 45 20.3 30 45 20.3 35 50 S1 T H Maximum Dimensions (mm) L 32 32 32 32 32 42.5 42.5 57.5 57.5 57.5 32 32 32 32 32 32 32 41.5 42.5 42 57.5 57.5 57.5 57.5 32 32 32 41.5 42 57.5 57.5 32 32 32 32 32 41.5 41.5 42 42 42 57.5 57.5 32 32 32 32 32 42.5 57.5 57.5 57.5 32 32 32 32 42.5 42 57.5 57.5 L (3) K = ±10%, J = ±5% © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 4 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Table 1B – Ratings & Part Number Reference Ripple Current Part Number 100 kHz 70°C (A) 2 wires F=0.8 C4ATDBU4100(2)0(3) C4ATDBU4220(2)0(3) C4ATDBU4330(2)0(3) C4ATDBU4500(2)0(3) C4ATDBW5100(2)0(3) C4ATDBW5200(2)0(3) C4ATDBW5300(2)0(3) C4ATDBW5400(2)0(3) C4ATDBW5500(2)0(3) C4ATDBW5600(2)0(3) C4ATFBU4100(2)A(3) C4ATFBU4150(2)A(3) C4ATFBU4200(2)B(3) C4ATFBW4330(2)C(3) C4ATFBW4400(2)E(3) C4ATFBW4500(2)E(3) C4ATFBW4680(2)G(3) C4ATFBW5100(2)F(3) C4ATFBW5150(2)J(3) C4ATFBW5200(2)L(3) C4ATFBW5250(2)M(3) C4ATFBW5300(2)M(3) C4ATFBW5350(2)N(3) C4ATFBW5400(2)N(3) C4ATGBU4100(2)A(3) C4ATGBW4330(2)E(3) C4ATGBW4680(2)G(3) C4ATGBW5100(2)F(3) C4ATGBW5150(2)L(3) C4ATGBW5200(2)M(3) Part Number 4 wires F=1.2 F=1.2 5 5 7 8 7 10 7 12 7 12 20 7 12 22 7 12 22 7 12 22 7 12 22 7 12 22 8 8 8 10 9 11 9 13 18 9 14 21 9 14 23 9 14 25 9 14 28 9 14 25 9 14 29 9 14 29 9 14 29 9 14 29 9 14 29 8 8 9 14 21 9 14 29 9 14 29 9 14 29 9 14 29 F=0.8 F=1.2 F=1.2 2 wires 4 wires Ripple Current (2) Lead Diameter: A1 = 0.8, A3 = 1.2 Peak Current (A) 30 66 99 150 300 400 600 600 750 900 74 111 148 244 296 370 504 502 753 1004 846 1015 1184 1350 82 269 554 552 828 744 (A) Peak Current ESR (Maximum) 100 kHz (mΩ) 2 wires F=0.8 F=1.2 4 wires dV/dt (V/µs) Packaging Quantity 30 30 30 30 30 20 20 15 15 15 74 74 74 74 74 74 74 50 50 50 34 34 34 34 82 82 82 55 55 37 288 288 234 96 80 36 36 27 23 21 288 288 234 96 80 80 64 58 36 36 27 27 23 23 288 80 64 58 36 27 dV/dt (V/µs) Packaging Quantity F=1.2 23.3 22.6 11.8 11 8.7 7.8 6.8 5.8 5.2 4 3.1 5.5 4.2 3.1 5.3 3.7 2.6 5.7 4.2 3.1 5.7 4.1 2.8 5.7 3.9 2.6 10.8 10.2 7.7 7.1 6.3 5.6 4.8 4 3.1 4.5 3.6 2.6 4 3.2 2.2 3.8 2.8 1.7 4.3 3.3 2.2 4 2.9 1.7 3.7 2.6 1.4 4.4 3.3 2 4.1 3 1.7 4.2 2.9 1.6 4 2.8 1.4 10 9.4 4.8 3.8 2.9 3.6 2.7 1.6 4.5 3.3 2.1 3.9 2.8 1.6 4.6 3.5 2.2 F=0.8 F=1.2 F=1.2 2 wires 4 wires ESR (Maximum) (3) K = ±10%, J = ±5% © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 5 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Table 1B – Ratings & Part Number Reference cont. Ripple Current Part Number 100 kHz 70°C (A) 2 wires F=0.8 C4ATGBW5330(2)N(3) C4ATHBU3680(2)A(3) C4ATHBU4100(2)B(3) C4ATHBW4200(2)E(3) C4ATHBW4220(2)E(3) C4ATHBW4330(2)G(3) C4ATHBW4470(2)F(3) C4ATHBW4500(2)F(3) C4ATHBW4680(2)J(3) C4ATHBW4900(2)L(3) C4ATHBW5100(2)L(3) C4ATHBW5120(2)M(3) C4ATHBW5200(2)N(3) C4ATJBU3470(2)A(3) C4ATJBW4100(2)D(3) C4ATJBW4150(2)E(3) C4ATJBW4220(2)E(3) C4ATJBW4300(2)G(3) C4ATJBW4500(2)L(3) C4ATJBW4900(2)M(3) C4ATJBW5100(2)M(3) C4ATJBW5150(2)N(3) C4ATMBU3220(2)A(3) C4ATMBU3470(2)B(3) C4ATMBW4100(2)E(3) C4ATMBW4150(2)G(3) C4ATMBW4330(2)J(3) C4ATMBW4470(2)L(3) C4ATMBW4680(2)M(3) C4ATMBW5100(2)N(3) Part Number 4 wires F=1.2 F=1.2 9 14 29 8 8 9 10 9 14 18 9 14 19 9 14 25 9 14 22 9 14 22 9 14 28 9 14 29 9 14 29 9 14 29 9 14 29 7 7 9 12 13 9 14 17 9 14 20 9 14 25 8 14 27 9 14 29 9 14 29 9 14 29 5 5 8 8 9 14 16 9 14 21 9 14 24 9 14 29 9 14 28 9 14 29 F=0.8 F=1.2 F=1.2 2 wires 4 wires Ripple Current (2) Lead Diameter: A1 = 0.8, A3 = 1.2 Peak Current (A) 1228 70 103 207 228 342 330 351 477 632 702 568 947 55 119 178 260 355 400 487 540 811 32.6 69 148 222 331 471 460 676 (A) Peak Current ESR (Maximum) 100 kHz (mΩ) 2 wires F=0.8 F=1.2 4 wires dV/dt (V/µs) Packaging Quantity 37 104 104 104 104 104 70 70 70 70 70 47 47 119 119 119 119 119 80 54 54 54 148 148 148 148 100 100 68 68 23 288 234 80 80 64 58 58 36 36 36 27 23 288 192 80 80 64 36 27 27 23 288 234 80 64 36 36 27 23 dV/dt (V/µs) Packaging Quantity F=1.2 4.1 2.9 1.5 11.5 10.9 8.4 7.7 5.6 4.7 3.7 5.3 4.4 3.4 4.4 3.5 2.4 5.3 4.4 3.3 5.2 4.2 3.1 4.8 3.6 2.4 4.3 3.2 1.9 4.1 3 1.8 5.2 4 2.8 4.5 3.2 1.9 14.3 13.6 7.9 7.1 6.3 6.2 5.3 4.3 4.9 4 3 4.4 3.4 2.3 4.8 3.8 2.8 5.6 4.5 3.2 5.3 4.2 2.9 4.7 3.5 2.1 23.8 23.1 12.1 11.4 7.1 6.2 5.2 5.6 4.7 3.6 5.7 4.6 3.3 4.8 3.7 2.5 5.8 4.6 3.4 5.1 3.8 2.5 F=0.8 F=1.2 F=1.2 2 wires 4 wires ESR (Maximum) (3) K = ±10%, J = ±5% © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 6 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Materials & Environment The selection of raw materials that KEMET uses for the production of its electronic components is the result of extensive experience. KEMET directs specific attention toward environmental protection. KEMET selects its suppliers according to ISO 9001 standards and performs statistical analyses on raw materials before acceptance for use in manufacturing our electronic components. All materials are, to the best of KEMET’s knowledge, non-toxic and free from cadmium; mercury; chrome and compounds; polychlorine triphenyl (PCB); bromide and chlorinedioxins bromurate clorurate; CFC and HCFC; and asbestos. Dissipation Factor Dissipation factor is a complex function involved with capacitor inefficiency. The tgδ may vary up and down with increased temperature. For more information, refer to Performance Characteristics. Sealing Hermetically Sealed Capacitors As the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a breach in the capacitor. Such a breach can result in leakage, impregnation, filling fluid, or moisture susceptibility. Barometric Pressure The altitude at which hermetically sealed capacitors are operated controls the capacitor's voltage rating. As the barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due to pressure changes. These effects can be in the form of capacitance changes, dielectric arc-over, and/or low insulation resistance. Altitude can also affect heat transfer. Heat that is generated in an operation cannot be dissipated properly, and high RI2 losses and eventual failure can result. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 7 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Construction Single-sided Metallized Polypropylene Film (First Layer) Molded Plastic Case Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin Leads Winding Scheme sided ized pylene m Single-sided Metallized Polypropylene Film 2 Sections 350 – 600 VAC © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 8 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC Marking FRONT Film Dielectric Manufacturer’s Logo Series Cap. Tolerance Rated Voltage Capacitance Rated Temperature Self-Healing Date Code OR FRONT Film Dielectric Series Self-Healing Manufacturer’s Logo Cap. Tolerance Rated Voltage Capacitance Date Code Rated Temperature *Marking layout depends on the production line Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics. Manufacturing Date Code (IEC 60062) Year Code Year Code Year Code Month Code Month Code 2020 2021 2022 2023 2024 2025 2026 M N P R S T U 2027 2028 2029 2030 2031 2032 2033 V W X A B C D 2034 2035 2036 2037 2038 2039 2040 E F G H K L M January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 9 Printed Circuit Board Mount Power Film Capacitors C4AT, Radial, 2 or 4 Leads, 250 – 850 VDC/160 – 450 VAC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3044_C4AT • 8/14/2023 10