F9033

Product Specification Bulletin Surface Mount Tip & Ring Ceramic Chip Capacitors KEMET’s 250 VDC or Tip & Ring MLCC capacitors are designed and rated for telecommunication ringer circuits where the capacitor is used to block -48 to -52 Volt DC of line voltage and pass a 16-25 Hz AC signal pulse of 70 Vrms to 90 Vrms. The surface mount ceramic capacitors are excellent replacements for high voltage leaded film devices. The smaller SMT footprints save valuable board space which is critical when creating new designs, and the capacitors are able to withstand today’s higher lead-free reflow processing temperatures. The ceramic MLCC have excellent high frequency filtering characteristics, low ESR, and high temperature reflow capabilities. KEMET Tip and Ring capacitors are available in standard EIA case sizes and standard capacitance values from 0.001μF to 1.2μF. The capacitors have pure tin (100% Matte Sn) plated terminations and are 100% lead free which is ideal for new environmentally demanding designs. Applications: • Telecommunication Ringing Circuits • Switch Mode Power Supply Snubber Circuits • High Voltage DC Blocking • High Voltage Coupling Markets: • Phone Lines • Analog and Digital Modems • FAX Machines • Wireless Base Stations, Ethernet • Digital Video Recording Set-Top Boxes • Satellite Dish • Cable Set-Top Boxes • High Voltage Power Supply, DC/DC Converters • Ethernet, POS, ATM Hardware Outline Drawing W T S ELECTRODES L B NICKEL PLATE CONDUCTIVE METALLIZATION TIN PLATE Table 1 – Dimensions - Millimeters (Inches) Metric Code 2012 3216 3225 4532 4564 5650 5664 EIA Size Code 0805 1206 1210 1812 1825 2220 2225 L - Length 2.0 (0.079) ± 0.2 (0.008) 3.2 (0.126) ± 0.2 (0.008) 3.2 (0.126) ± 0.2 (0.008) 4.5 (0.177) ± 0.3 (0.012) 4.5 (0.177) ± 0.3 (0.012) 5.6 (0.224) ± 0.4 (0.016) 5.6 (0.224) ± 0.4 (0.016) W - Width 1.2 (0.049 ± 0.2 (0.008) 1.6 (0.063) ± 0.2 (0.008) 2.5 (0.098) ± 0.2 (0.008) 3.2 (0.126) ± 0.3 (0.012) 6.4 (0.250) ± 0.4 (0.016) 5.0 (0.197) ± 0.4 (0.016) 6.4 (0.250) ± 0.4 (0.016) B - Bandwidth 0.5 (0.02) ± 0.25 (0.010) 0.5 (0.02) ± 0.25 (0.010) 0.5 (0.02) ± 0.25 (0.010) 0.6 (0.024) ± 0.35 (0.014) 0.6 (0.024) ± 0.35 (0.014) 0.6 (0.024) ± 0.35 (0.014) 0.6 (0.024) ± 0.35 (0.014) Band Separation 0.75 (0.030) N/A N/A N/A N/A N/A N/A Note: For thickness dimensions, see Table 2. F-9033D 11/07 Capacitor Ordering Information C Style C - Ceramic Size Code 0805, 1206, 1210, 1812, 1825, 2220, 2225 0805 C 103 K A R A C End Metallization C = 100% Sn Std. Failure Rate Level A = Not Applicable Temperature Characteristic Designated by Capacitance Change over Temperature Range R – X7R (±15%) (-55°C +125°C) Voltage A = 250V Specification C - Standard Capacitance Code, pF First two digits represent significant figures. Third digit specifies number of zeros. 100 pF = 101. Capacitance Tolerance J = ±5%, K = ±10%, M = ±20% General Performance Characteristics & Electrical Parameters 250 VDC EIA Case Sizes Capacitance Range Test Parameters Operating Temperature Range Temperature Characteristic Capacitance Tolerances Dissipation Factor Aging Rate Voltage Rating 25°C IR @ Rated Voltage Dielectric Strength (DMV) 0805, 1206, 1210, 1812, 1825, 2220, 2225 0.001μF to 1.2μF Capacitance and Dissipation Factor measured at 1.0 ± 0.2 Vrms and 1.0 ± 0.2 kHz -55°C to +125°C -55°C to +125°C X7R: ±15% (0% VDC) J = ±5%, K = ±10%, M = ±20% ≤2.5% 2.5% per decade hour 250 VDC 1000MΩ−μF or 100GΩ, whichever is less 250% of Rated Voltage 5 ± 1 seconds and charge/discharge not exceeding 50mA These chips are supplied unmarked. If required, they can be laser-marked as an extra cost option. Details on the marking format are included in KEMET Surface Mount Catalog F3102 on page 96. The 0805 and 1206 sizes are suitable for either reflow or wave soldering. Sizes 1210 and larger should be limited to reflow soldering only. All sizes incorporate the standard KEMET barrier layer of pure nickel with an overplating of pure tin for excellent solderability and resistance to leaching of the termination. KEMET High Voltage Surface Mount MLCC capacitors are available packaged in tape and reel configuration. Marking Soldering Process Packaging Recommended Solder Pad Dimensions T - Total Length S - Separation Chip Size mm 0805 1206 1210 1812 1825 2220 2225 3.30 4.50 4.50 5.90 5.90 7.00 7.00 in. 0.130 0.177 0.177 0.232 0.232 0.276 0.276 mm 0.70 1.50 1.50 2.30 2.30 3.30 3.30 in. 0.028 0.059 0.059 0.091 0.091 0.130 0.130 mm 1.60 2.00 2.90 3.70 6.90 5.50 6.80 in. 0.063 0.079 0.114 0.146 0.272 0.217 0.268 mm 1.30 1.50 1.50 1.80 1.80 1.85 1.85 in. 0.051 0.059 0.059 0.071 0.071 0.073 0.073 W - Pad Width L - Pad Length © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com Table 2 - X7R Dielectric Capacitance Values Cap Code pF 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1,000,000 1,200,000 0805 DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC DC 1206 1210 1812 1825 2220 2225 EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB EB ED ED ED ED EM FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FB FC FC FC FF FG GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GB GE GG GG GG GG GG GJ HD HD HD HF HF JC JD JD JF JF KD KD KD KE KE KE Thickness Code (mm) & Reeling Quantities Thickness Code DC EB ED EM FB FC FF FG FH GB GE GF GG GJ HD HF JC JD JF KD KE Series 0805 1206 1206 1206 1210 1210 1210 1210 1210 1812 1812 1812 1812 1812 1825 1825 2220 2220 2220 2225 2225 Dimension 0.78 0.78 1.00 1.25 0.78 0.90 1.10 1.25 1.55 1.00 1.30 1.55 1.50 1.70 1.30 1.50 1.10 1.30 1.50 1.30 1.40 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 0.10 0.10 0.10 0.15 0.10 0.10 0.10 0.10 0.15 0.10 0.15 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 7" Reel Qty. 4000 4000 2500 2500 4000 4000 2500 2500 2000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 13" Reel Qty. 10000 10000 10000 10000 10000 10000 10000 10000 8000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 4000 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6300 • www.kemet.com