MPCH1060LR45

SMD Inductors Large-Current Power Inductors MPCH Overview Applications The KEMET MPCH metal composite inductors are designed for use in power supplies with ripple currents up to 32 A. These inductors offer superior permeability when compared to technologies based on ferrite cores. • Switching DC-DC power supplies • Notebook computers • Tablets • Embedded computer systems • Servers and storage • HDTVs The flat wire design allows for high efficiency under high current loads. Benefits • Metal composite powder • Operating temperature up to +125°C • High current • High permeability • Low DCR • Low acoustic noise Part Number System MPCH 0730 L R12 Series Size Code Inductor Inductance Code µH MPCH 0730 0740 1040 1055 1060 1250 R = Decimal point Examples: R12 = 0.12 µH 1R3 = 1.30 µH One world. One KEMET © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9003_MPCH • 3/26/2019 1 SMD Inductors Large-Current Power Inductors MPCH Performance Characteristics Item Performance Characteristics Operating Temperature Rated Inductance Range Inductance Tolerance Rated DC Resistance Range DC Resistance Tolerance Rated Current Range –40°C to +125°C (including self-temperature rise) 0.12 – 1.50 µH at 100 kHz, 1 mA ±20% 0.65 – 2.30 mΩ ±10% 17 – 32 A Table 1 – Ratings & Part Number Reference Rated Current (A) Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) ±10% Irms (Ref.) Isat2 (Ref.) MPCH0730LR12 0.12 ±20% 0.65 31.00 32.00 MPCH0730LR24 0.24 ±20% 1.20 23.00 18.50 MPCH0740LR15 0.15 ±20% 0.93 29.00 31.00 1 MPCH0740LR24 0.24 ±20% 0.96 27.00 20.00 MPCH0740LR36E* 0.36 ±20% 1.42 23.00 22.00 MPCH1040LR36 0.36 ±20% 0.88 28.00 24.00 MPCH1040LR68 0.68 ±20% 1.35 22.00 24.00 MPCH1040L1R0 1.00 ±20% 2.30 17.00 17.00 MPCH1055L1R3 1.30 ±20% 2.30 18.50 17.00 MPCH1060LR45 0.45 ±20% 0.76 32.00 32.00 MPCH1250L1R5 1.50 ±20% 2.20 21.00 21.00 T = 40 K rise at rated current Inductance drop 20% at rated current All electrical characteristics data is referenced to 20°C. * This part is not for new design. 1 2 SMD Type DC-Superposed Characteristics DC-Superposed Characteristics MPCH0730LR12 0.30 MPCH0730LR24 0.14 0.25 Inductance (µH) Inductance (µH) 0.12 0.10 0.08 0.06 0.04 0.15 0.10 0.05 0.02 0.00 0.20 0 5 10 15 20 25 30 35 40 0.00 IDC (A) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard MPCH0740LR15 Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.20 0.18 0.16 0 5 10 15 20 25 30 35 40 IDC (A) 0.30 0.25 MPCH0740LR24 L9003_MPCH • 3/26/2019 2 0.00 Indu Indu SMD Inductors 0.06 0.02 0.04 0.00 0.02 0 5 10 15 20 25 30 35 0.00 0.05 40 IDC (A) 0 5 10 15 20 25 30 35 0.05 0.10 0.00 40 0 5 10 15 0 5 10 15 Large-Current Power Inductors MPCH IDC (A) 0.30 0.20 MPCH0740LR15 0.25 0.30 0.18 0.14 Inductance Inductance (µH) (µH) Inductance Inductance (µH) (µH) 0.20 0.16 0.16 0.12 0.14 0.10 0.12 0.08 0.10 0.06 0.08 0.04 0.06 0.02 0.04 0.00 0.02 0.00 0 5 10 15 20 25 30 35 5 10 15 20 0.40 25 30 35 0.40 0.35 0.25 0.30 0.20 0.25 0.15 0.20 0.10 0.15 0.05 0.00 0 10 15 20 25 30 35 40 10 15 20 0 5 10 15 25 30 35 Inductance Inductance (µH) (µH) 0.60 0.4 0.80 0.3 0.40 0.60 0.2 0.20 0.40 0.1 0.00 0 10 10 5 10 35 40 0 5 10 15 20 25 30 35 40 25 30 35 40 25 30 35 40 MPCH1040LR36 MPCH1040LR36 0.30 0.20 0.25 0.15 0.20 0.10 0.15 0.05 0.10 0.00 0 5 10 15 20 IDC (A) 5 10 15 20 MPCH1055L1R3 MPCH1055L1R3 0.80 0.5 1.00 5 5 30 0.35 0.25 1.60 MPCH1040L1R0 0.00 0.200 0 0 25 IDC (A) Inductance Inductance (µH) (µH) Inductance [μH] 0.7 1.00 1.20 0.6 20 0.40 0.30 0.00 40 MPCH1040LR68 MPCH1040L1R0 0.8 1.20 40 IDC (A) IDC (A) * This part is not for new design. 35 MPCH0740LR24 0.05 0 IDC (A) 5 30 0.05 0.10 0.45 0.35 0.40 0.30 5 25 0.10 0.15 0.45 MPCH0740LR36E* 0.05 0 20 IDC (A) MPCH0740LR36E* 0.10 0.00 40 0.15 0.20 0.00 40 Inductance Inductance (µH) (µH) Inductance Inductance (µH) (µH) 0.45 0.35 35 MPCH0740LR24 IDC (A) 0.45 30 0.20 0.25 0.00 0.05 40 IDC (A) 0 25 IDC (A) DC-Superposed Characteristics cont’d MPCH0740LR15 0.18 20 IDC (A) 15 15 20 20 25 25 30 30 15 20 25 30 IDC (A) lDC (A) IDC (A) 1.40 1.60 1.20 1.40 1.00 1.20 0.80 1.00 0.60 0.80 0.40 0.60 0.20 0.40 0.00 0.20 0 0.00 5 10 15 20 25 30 20 25 30 IDC (A) 0 5 10 15 IDC (A) Power Inductors VOL.11 12 Power Inductors VOL.11 12 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9003_MPCH • 3/26/2019 3 Ind Ind 0.15 0.10 0.05 SMD Inductors 0.00 0.15 0.10 0.05 0 5 10 15 20 25 30 35 0.00 40 0 5 10 15 Large-Current Power Inductors MPCH IDC (A) 20 25 30 35 40 IDC (A) DC-Superposed Characteristics cont’d MPCH1040L1R0 1.60 1.20 1.40 1.20 Inductance (µH) Inductance (µH) 1.00 0.80 0.60 0.40 0.20 0.00 MPCH1055L1R3 1.00 0.80 0.60 0.40 0.20 0 5 10 15 20 25 30 0.00 0 5 10 IDC (A) 0.60 MPCH1060LR45 0.2 Power Inductors VOL.11 12 15 20 25 30 IDC (A) MPCH1250L1R5 0.50 Inductance (µH) Inductance (µH) 1.5 0.40 0.30 0.20 1.0 0.5 0.10 0.00 0 5 10 15 20 25 30 35 40 45 50 DC Current (A) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.0 0 5 10 15 20 25 DC Current (A) L9003_MPCH • 3/26/2019 4 SMD Inductors Large-Current Power Inductors MPCH Dimensions ●MPCH1250 ●MPCH1250 ●MPCH1250 ●MPCH1250 ●MPCH1250 ●MPCH1250 ●MPCH1250 MPCH1250 12.50 12.50 12.50 12.50 12.50 12.0 maximum 12.0 maximum 12.0 maximum maximum 12.0 12.0 maximum 12.0 maximum 12.0 maximum 12.0 maximum 6.0 maximum 6.0 maximum 6.0 6.0 maximum maximum 6.0 maximum 6.0 maximum 6.0 maximum 6.0 maximum 14.3 maximum 5.0 maximum 14.3 maximum 5.0 maximum 14.3 maximum 5.0 maximum 14.3 maximum 14.3 maximum 14.3 14.3 maximum maximum 14.3 maximum 14.3 maximum 14.3 maximum 5.0 maximum 5.0 maximum 5.0 5.0 maximum maximum 5.0 maximum 5.0 maximum 5.0 maximum （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.2） （2.2） （2.2） 5.9 3.3 5.9 5.9 3.3 3.7 5.2 3.7 3.7 5.2 3.7 5.2 3.7 5.2 （2.2） （2.2） （2.2） （2.2） （2.2） （2.2） （2.2） © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 5.9 3.3 3.3 3.3 5.9 3.7 3.7 3.7 3.7 3.7 5.2 3.7 2.62.6 2.62.62.6 2.6 2.6 2.6 3.6 3.6 3.3 3.3 2.6 3.3 3.63.3 (Others) 4.1 (R68) 3.6 (Others) 3.6 (Others) 4.1 3.6 (R68) (Others) (R68) 3.64.1 (Others) 3.6 (Others) (R68) 3.64.1 (Others) 3.3 4.1 (R68) 4.1 (R68) 4.1 (R68) 3.6 (Others) 3.3 3.6 (Others) 4.1 (R68) 5.94.1 (R68) 3.3 5.9 3.3 5.9 3.3 3.6 3.3 (Others) 5.94.1 (R68) 3.3 5.93.3 3.3 3.3 3.3 3.3 3.3 5.9 2.6 2.0 ±0.3 2.0 ±0.3 2.0 ±0.32.0 ±0.3 2.0 ±0.3 2.0 ±0.3 2.0 ±0.3 2.02.0 ±0.3 2.0 ±0.3 ±0.3 （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） 5.9 3.3 3.7 3.7 5.2 5.2 5.2 5.2 3.7 5.2 3.7 3.3 8.7 3.3 3.3 8.7 3.3 3.3 8.7 3.3 3.3 3.3 8.7 8.7 3.3 3.3 8.7 3.3 8.7 3.3 3.3 8.7 8.7 3.3 3.3 8.7 3.63.6 3.63.63.6 6.0 maximum （2.1） 3.3 3.3 3.3 3.3 3.3 3.3 3.7 3.7 3.7 3.7 3.7 4.14.14.1 4.14.1 6.0 maximum 12.0 maximum （2.1） 3.3 5.9 3.6 5.5 maximum （2.1） 5.9 3.6 11.7 maximum 12.0 maximum （2.1） （2.1） 3.3 3.3 3.3 5.9 5.93.3 3.3 5.9 3.6 5.5 maximum 5.5 5.5 maximum 5.5 maximum maximum 5.5 maximum 5.5 maximum 5.5 maximum 3.3 4.1 4.1 11.7 maximum 11.7 11.7 maximum 11.7 maximum maximum 11.7 maximum 11.7 maximum 11.7 maximum 2.7 3.3 5.9 3.3 3.3 5.9 5.93.3 3.0（1.5） ±0.5 (Others) 3.5 ±0.5 (R68) 3.0 ±0.5 (Others) 3.5 ±0.5 (R68) （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） （2.1） 2.7 3.5 4.1 5.5 maximum 3.5 2.7 4.1 5.5 maximum 11.7 maximum 2.7 4.1 MPCH1060 ●MPCH1250 ●MPCH1250 10.0 ±0.3 10.0 ±0.3 10.0 10.0 ±0.3 10.0 ±0.3 ±0.3 ●MPCH1060 ●MPCH1060 ●MPCH1060 ●MPCH1060 ●MPCH1060 ●MPCH1060 ●MPCH1060 11.7 maximum 2.7 3.6 3.6 ●MPCH1060 ●MPCH1060 4.0 maximum 3.5 3.3 3.3 3.3 3.3 3.3 3.6 MPCH1055 ●MPCH1055 4.0 maximum 11.5 maximum 3.5 3.6 ●MPCH1055 ●MPCH1055 ●MPCH1055 ●MPCH1055 ●MPCH1055 ●MPCH1055 11.5 maximum 2.7 3.6 ●MPCH1055 ●MPCH1055 4.0 maximum 4.0 maximum 4.0 maximum 4.0 4.0 maximum maximum 4.0 maximum 4.0 maximum 4.0 maximum 2.7 2.7 2.7 2.7 2.7 2.7 3.63.6 3.63.63.6 ●MPCH1040 11.5 maximum 11.5 maximum 11.5 maximum 11.5 11.5 maximum maximum 11.5 maximum 11.5 maximum 11.5 maximum （1.5） （1.5） （1.5） （1.5） 3.0（1.5） ±0.5 (Others) 3.5（1.5） ±0.5 (Others) (R68) 3.0 ±0.5 （1.5） 3.0（1.5） ±0.5 (R68) (Others) 3.0 (Others) 3.5 ±0.5 3.0 ±0.5 3.5±0.5 ±0.5 (Others) (R68) 3.5 3.0 (Others) 3.5 ±0.5 (R68) (R68) 3.0 ±0.5 (Others) （1.5） 3.5 ±0.5 ±0.5 (R68) 3.0 (Others) 3.5 ±0.5 (R68) 3.5 ±0.5 (R68) 3.0 ±0.5 3.0 ±0.5 3.03.0 ±0.5 3.0 ±0.5 ±0.5 MPCH1040 ●MPCH1040 10.0 ±0.3 10.0 ±0.3 10.0 10.0 ±0.3 10.0 ±0.3 ±0.3 ●MPCH1040 ●MPCH1040 ●MPCH1040 ●MPCH1040 10.0 ±0.3 10.0 10.0 ±0.3 10.0 ±0.3 ±0.3 10.0 ±0.3 ●MPCH1040 ●MPCH1040 ●MPCH1040 ●MPCH1040 8.0 maximum 3.0 maximum (MPCH0730) 4.0 maximum (MPCH0740) 3.0 maximum (MPCH0730) 4.0 maximum (MPCH0740) 3.5 2.7 2.7 3.5 3.52.7 3.0 ±0.5 3.0 ±0.5 3.0 ±0.53.0 ±0.5 3.0 ±0.5 ●MPCH0730 8.0 maximum 4.0 maximum (MPCH0740) 3.5 ±0.5 3.5 ±0.5 3.53.5 ±0.5 3.5 ±0.5 ±0.5 ●MPCH0730 8.0 maximum 2.7 2.7 2.7 3.5 3.52.7 2.7 3.5 3.0 ±0.5 3.5 ±0.5 3.0 ±0.5 3.0 ±0.53.0 ±0.5 3.0 ±0.5 3.5 ±0.5 3.5 ±0.53.5 ±0.5 3.5 ±0.5 MPCH0740 6.7 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 10.0 ±0.3 ±0.310.0 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 10.0 ±0.3 ±0.3 10.0 ±0.3 6.7 ±0.36.7 ±0.3 6.7 ±0.3 10.0 ±0.3 10.0 ±0.3 10.0 10.0 ±0.3 ±0.3 6.7 ±0.3 12.50 12.50 12.50 12.5012.50 10.0 ±0.3 ●MPCH0730 Land Pattern (mm) 3.0 maximum (MPCH0730) 3.0 maximum (MPCH0730) 3.0 maximum (MPCH0730) 8.0 maximum 4.0 (MPCH0740) 3.0 maximum (MPCH0730) 8.0 maximum3.0 4.0 maximum (MPCH0740) 8.0 4.0 (MPCH0740) (MPCH0730) 8.0 maximum maximum 4.0 maximum maximum (MPCH0740) 3.0 maximum (MPCH0730) 8.0 maximum 4.0 maximum (MPCH0740) (MPCH0730) 8.0 maximum3.0 4.0 maximum (MPCH0740) 8.0 maximum 4.0 maximum (MPCH0740) 3.0 maximum (MPCH0730) 6.7 ±0.3 6.7 ±0.3 6.76.7 ±0.3 6.7 ±0.3 ±0.3 ●MPCH0730 ●MPCH0730 ●MPCH0730 ●MPCH0730 ●MPCH0730 ●MPCH0730MPCH0730 Dimensions (mm) 3.0 ±0.5 3.0 ±0.5 3.03.0 ±0.5 3.0 ±0.5 ±0.5 Case Size L9003_MPCH • 3/26/2019 5 SMD Inductors Large-Current Power Inductors MPCH Taping Specification Dimensions of Indented Square Hole Plastic Tape øD0 W F P2 E P0 T P1 Reel Dimensions MPCH0730 MPCH0740 E Reel Quantity E C MPCH1040 1,000   C D W1 1,000 Dimensions (mm) W F E Tolerance Nominal ±0.2 16.0 ±0.1 7.5 ±0.1 1.75 ±0.1 12.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 Tolerance Nominal ±0.3 24.0 ±0.1 11.5 ±0.1 1.75 ±0.1 16.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 P2 Nominal 24.0 ±0.1 11.5 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 Tolerance Nominal ±0.2 24.0 ±0.1 11.5 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 Tolerance Nominal ±0.2 24.0 ±0.1 11.5 ±0.1 1.75 ±0.1 24.0 ±0.1 2.0 ±0.1 4.0 ±0.05 1.55 ±0.05 0.4 A B Case Size MPCH1060 500 MPCH1250 W2 øD0 W P0 T F MPCH1055 D E Enlarged Dimensions Viewof Indented Square Hole Plastic Tape Tolerance ±0.2 P1 P2 P0 øD0 T P1 Reel Specifications Reel Dimensions E E C D A B W1 C Enlarged View D W2 Dimensions (mm) Case Size A B C D E MPCH0730, MPCH0740 Tolerance Nominal ±2.0 ø330 ±1.0 ø80 ±0.5 ø13.0 ±0.8 ø21.0 ±0.5 2.0 ±1.0 17.5 ±1.0 21.5 MPCH1040 Tolerance Nominal ±2.0 ø380 ±1.0 ø80 ±0.5 ø13.0 ±0.8 ø21.0 ±0.5 2.0 ±2.0 24.4 ±3.0 30.4 Tolerance ±2.0 ±1.0 ±0.5 ±0.8 ±0.5 ±2.0 ±3.0 Nominal ø380 ø100 ø13.0 ø21.0 2.0 24.4 30.4 MPCH1055 MPCH1060 MPCH1250 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com W1 W2 L9003_MPCH • 3/26/2019 6 SMD Inductors Large-Current Power Inductors MPCH Soldering Process Recommended Reflow Soldering Profile Reference ICP/JEDEC J-STD-020E Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (ts) from Tsmin to Tsmax 150°C 200°C 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum Liquidous Temperature (TL) 217°C Time Above Liquidous (tL) 60 – 150 seconds Peak Temperature (TP) 250°C for MPCH07xx 245°C for MPCH1xxx Time within 5°C of Maximum Peak Temperature (tP) 30 seconds maximum Ramp-down Rate (TP to TL) 6°C/second maximum Time 25°C to Peak Temperature 8 minutes maximum TP TL Temperature Profile Feature tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductors’ stock should be used promptly, preferably within six months of receipt. Export Control For customers in Japan For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required for export. For customers outside Japan Inductors should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destruction weapons (nuclear, chemical, biological weapons or missiles), or any other weapons. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9003_MPCH • 3/26/2019 7 SMD Inductors Large-Current Power Inductors MPCH KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9003_MPCH • 3/26/2019 8