MPCV1260L1R5

SMD Inductors Large-Current Power Inductors MPCV Overview Applications The KEMET MPCV metal composite inductors are ideal for use in DC to DC switching power supplies for automotive applications. The combination of composite core material and flat wire allows these inductors to be used in applications with high current loads and where efficiency is important. Automotive ECU applications, such as: • LED headlights • Meter cluster panels • Head-up displays (HUD) • Electric water pumps (EWP) • Electric oil pumps (EOP) • Electric power steering (EPS) Benefits • Metal composite powder • Operating temperature up to +155°C • High current • Low DCR • Low acoustic noise • Low magnetic flux leakage • AEC–Q200 qualified Part Number System MPCV 1060 L 1R5 Series Size Code Inductor Inductance Code µH MPCV 1060 1260 R = decimal point Examples: R68 = 0.68 µH 1R5 = 1.50 µH Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9011_MPCV • 9/16/2020 1 SMD Inductors Large-Current Power Inductors MPCV Performance Characteristics Item Performance Characteristics Operating Temperature Rated Inductance Range Inductance Tolerance Rated DC Resistance Range DC Resistance Tolerance Rated Current Range –55°C to +155°C (including self-temperature rise) 0.68 – 1.50 µH at 100 kHz, 1 mA ±20% 1.4 – 2.5 mΩ ±10% 22 – 32 A Table 1 – Ratings & Part Number Reference Part Number Inductance (µH) at 100 kHz, 1 mA Inductance Tolerance DC Resistance (mΩ) ±10% MPCV1060LR68 MPCV1060L1R0 0.68 ±20% 1.00 ±20% Rated Current (A) Irms1 (Reference) Isat2 (Reference) 1.40 32 38 1.70 26 35 27 MPCV1060L1R5 1.50 ±20% 2.50 22 MPCV1260L1R0 1.00 ±20% 1.50 32 42 MPCV1260L1R5 1.50 ±20% 2.35 28 35 T = 40 K rise at rated current Inductance drop 30% at rated current All electrical characteristics data is referenced to 25°C. 1 2 DC-Superposed Characteristics MPCV1060 MPCV1260 2.0 0.68 µH 1.8 Inductance (µH) 1.2 1060L1R0 1.0 1060LR68 0.8 1.5 µH 1.6 1.5 µH 1060L1R5 1.4 1.0 µH 1.8 1.0 µH 1.6 Inductance (µH) 2.0 0.6 1260L1R5 1.4 1.2 1260L1R0 1.0 0.8 0.6 0.4 0.4 0.2 0.2 0.0 0.0 0 5 10 15 20 25 DC Current (A) 30 35 40 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0 5 10 15 20 25 DC Current (A) 30 35 40 L9011_MPCV • 9/16/2020 2 SMD Inductors Large-Current Power Inductors MPCV Dimensions Dimensions (mm) 6.0 maximum (2.1) 6.0 maximum (2.2) MPCV1260 5.9 3.3 3.4 8.6 3.4 12.5 ±0.3 3.0 ±0.5 14.5 maximum 3.3 3.6 MPCV1060 10.0 ±0.3 3.0 ±0.5 12.0 maximum Land Pattern (mm) 3.6 Case Size © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9011_MPCV • 9/16/2020 3 SMD Inductors Large-Current Power Inductors MPCV Taping Specification Dimensions of Indented Square Hole Plastic Tape øD0 W F P2 E P0 T P1 Reel Dimensions Dimensions of Case Indented SquareReel Hole Plastic Tape 500 MPCV1260 D Tolerance Nominal Tolerance Nominal 300 Dimensions (mm) W1 E A0 2 C   W F E F 0 øD0 ±0.30 24.00 ±0.10 11.50 ±0.10 1.75 ±0.10 24.00 ±0.10 2.00 ±0.10 4.00 ±0.05 1.55 ±0.05 0.40 ±0.30 24.00 ±0.10 11.50 ±0.10 1.75 ±0.10 24.00 ±0.10 2.00 ±0.10 4.00 ±0.05 1.55 ±0.05 0.40 P1 W MPCV1060 Quantity P P A B T Size P1 P2 P0 øD0 T W2 Reel Specifications Reel Dimensions A0 C D A B W1 W2 Dimensions (mm) Case Size MPCV1060 MPCV1260 A B C D A0 Tolerance Nominal ±2.0 ø380 ±2.0 ø80 ±0.5 ø13.0 ±0.8 ø21.0 ±0.5 2.3 Tolerance ±3.0 ±1.0 ±0.5 ±0.8 ±0.5 Nominal ø330 ø100 ø13.0 ø21.5 2.6 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com W1 W2 25.4 29.4 25.0 29.0 L9011_MPCV • 9/16/2020 4 SMD Inductors Large-Current Power Inductors MPCV Soldering Process Recommended Reflow Soldering Profile Reference ICP/JEDEC J-STD-020E Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (ts) from Tsmin to Tsmax 150°C 200°C 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/second maximum Liquidous Temperature (TL) 217°C Time Above Liquidous (tL) 60 – 150 seconds Peak Temperature (TP) 245°C Time within 5°C of Maximum Peak Temperature (tP) 30 seconds maximum Ramp-down Rate (TP to TL) 6°C/second maximum Time 25°C to Peak Temperature 8 minutes maximum TP TL Temperature Profile Feature tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time Handling Precautions Inductors should be stored in normal working environments. While the inductors themselves are quite robust in other environments, exposure to high temperatures, high humidity, corrosive atmospheres, and long-term storage degrades solderability. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine-bearing and sulfur-bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. For optimized solderability, inductor stock should be used promptly, preferably within six months of receipt. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9011_MPCV • 9/16/2020 5 SMD Inductors Large-Current Power Inductors MPCV KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com L9011_MPCV • 9/16/2020 6