RSBEC2470Z300K

General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Overview Applications The RSB is constructed of metallized polyester film (stacked technology) with radial leads of tinned wire. Radial leads are electrically welded to the contact metal layer on the ends of the capacitor winding. The capacitor is encapsulated with thermosetting resin in a box of material meeting the UL 94 V–0 requirements. Typical applications include high performance, high temperature, blocking, coupling, decoupling for a signal from DC to high frequency, pulse, logic and timing circuit, lamp capacitor for electronic compact lamps, inverter for LCD monitors, and automotive DC motor suppression. Not suitable for across-the-line application (see Suppressor Capacitors). Automotive grade devices meet the demanding Automotive Electronics Council's AEC–Q200 qualification requirements. Benefits • Voltage range: 50 – 630 VDC • Capacitance range: 0.001 – 4.7 µF • Lead spacing: 5 mm • Capacitance tolerance: ±20%, ±10% standard, ±5% on request • Climatic category: 55/125/56 • Operating temperature range of −55˚C to +125˚C • RoHS Compliant and lead-free terminations • Tape and reel packaging in accordance with IEC 60286–2 • Self-healing • Automotive grade (AEC–Q200) Part Number System RSB D C 3100 AA 00 J Series Rated Voltage (VDC) Length (mm) Capacitance Code (pF) Packaging Internal Use Capacitance Tolerance See Ordering Options Table 30 50 60 70 Metallized Polyester C = 50 D = 63 E = 100 I = 250 M = 400 W = 500 P = 630 C = 5.0 The last three digits represent significant figures. First digit specifies the number of zeros to be added. J = ±5% K = ±10% M = ±20% Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 1 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging LL Lead Length (mm) Lead and Packaging Code 4 +1.5/−0 H0=18.5 ±0.5 AA DQ H0 = 18.5 ±0.5 2.7 +0.5/−0 3.5 +0.5/−0 10 ±1 3.2 +0.3/−0.2 17 +1/−2 CK JA JB JC JH Z3 Standard Lead and Packaging Options Bulk – Short Leads Ammo Pack Other Lead and Packaging Options Tape & Reel (Standard Reel Ø 355 mm) Bulk – Short Leads Bulk – Short Leads Bulk – Short Leads Bulk – Short Leads Bulk – Long Leads 5 Dimensions – Millimeters FRONT VIEW SIDE VIEW L T H S 0.5 LL F S T H L F Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 5.0 5.0 5.0 5.0 5.0 5.0 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 ±0.4 2.5 3.5 4.5 5.0 6.0 7.2 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 6.5 7.5 9.5 10.0 11.0 13.0 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 +0.1/−0.5 7.2 7.2 7.2 7.2 7.2 7.2 +0.2/−0.5 +0.2/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 +0.3/−0.5 0.5 0.5 0.5 0.5 0.5 0.5 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 ±0.05 Note: See Ordering Options Table for lead length (LL/H 0) options. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 2 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Performance Characteristics Dielectric Plates Winding Leads Protection Related Documents Polyester film (polyethylene terephthalate) Metal layer deposited by evaporation under vacum Non-inductive type Tinned wire Plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94. IEC 60384–2 Rated Voltage VR (VDC) 50 63 100 250 400 500 630 Rated Voltage VR (VAC) 30 40 63 160 200 220 220 Capacitance Range (µF) 2.2 0.1 – 4.7 0.0047 – 0.47 0.001 – 0.15 0.001 – 0.047 0.001 – 0.015 0.001 – 0.01 Capacitance Values E6 series (IEC 60063) measured at 1 kHz and +20±1°C Capacitance Tolerance ±5% on request, ±10%, ±20% Operating Temperature Range −55°C to 125°C Rated Temperature TR Voltage Derating Climatic Category +85°C Above +85°C DC and AC voltage derating is 1.25%/°C 55/125/56 IEC 60068−1 Storage time: ≤ 24 months from the date marked on the label package Average relative humidity per year ≤ 70% Storage Conditions RH ≤ 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: −40 to 80°C (see "Maximum Humidity in Storage Conditions" graph below) Test Voltage Capacitance Drift 1.6 x VR VDC for 2 seconds (between terminations) at +25°C ±5°C Maximum 3% after a 2 year storage period at a temperature of +10°C to +40°C and a relative humidity of 40% to 60% Operational life >200,000 hours Reliability (Reference IEC 61709) Failure rate ≤ 1 FIT, T = +40°C, V = 0.5 x VR Failure criteria: open or short circuit, cap. change > 10%, DF 2 times the catalog limits, IR < 0.005 x initial limit Maximum Pulse Steepness Temperature Coefficient Self Inductance (Lead Length ~ 2 mm) dV/dt according to Table 1. For peak to peak voltages lower than rated voltage (Vpp 2.2 µF 1 kHz 0.80% 0.80% 0.80% 10 kHz 1.20% 1.20% 1.50% 100 kHz 2.50% – – Measured at +25°C ±5°C, according to IEC 60384–2 Minimum Values Between Terminals Insulation Resistance 50 VDC for VR ≤ 100 VDC 1 minute 100 VDC for VR > 100 VDC 1 minute C ≤ 0.33 μF 0.33 µF < C ≤ 1.0 μF C > 1.0 μF ≥ 15,000 MΩ ≥ 5,000 MΩ • µF ≥ 1,000 MΩ • µF ≥ 30,000 MΩ Maximum Humidity in Storage Condition 100 45 90 40 80 35 70 Maximum Overtemperature ∆Tlim vs Th 30 60 ∆Tlim (°C) 50 40 30 Days Annual Average 30 20 25 20 15 10 5 10 0 0 −40 −20 0 20 40 Temperature (°C) 60 80 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 Relative Humidity (%) Voltage Charge/Time Temperature Th(°C) Th is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC–Q200, please visit their website at www.aecouncil.com. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 4 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) 63 Vdc / 40 Vac 50 Vdc / 30Vac 100 Voltage (Vrms) Voltage (Vrms) 100 10 10 0.1 µF p = 5 0.47 µF p = 5 1 µF p = 5 2.2 µF p = 5 1 1 0.1 1 Frequency (kHz) 10 100 0.1 1 100 Vdc / 63 Vac Frequency (kHz) 10 100 10 100 250 Vdc / 160 Vac 100 1,000 0.01 µF p = 5 0.047 µF p = 5 0.33 µF p = 5 10 1 Voltage (Vrms) Voltage (Vrms) 100 0.1 1 Frequency (kHz) 10 100 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.01 µF p = 5 0.047 µF p = 5 0.15 µF p = 5 10 1 0.1 1 Frequency (kHz) F3067_RSB • 8/14/2023 5 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Maximum Voltage (Vrms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) cont. 500 Vdc / 220 Vac 400 Vdc / 200 Vac 100 100 0.0047 µF p = 5 0.022 µF p = 5 0.047 µF p = 5 10 1 Voltage (Vrms) 1,000 Voltage (Vrms) 1,000 0.1 1 Frequency (kHz) 10 100 10 100 0.0015 µF p = 5 0.0033 µF p = 5 0.015 µF p = 5 10 1 0.1 1 Frequency (kHz) 10 100 500 Vdc / 220 Vac 1,000 Voltage (Vrms) 100 0.0015 µF p = 5 0.0033 µF p = 5 0.015 µF p = 5 10 1 0.1 1 Frequency (kHz) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 6 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) 63 Vdc / 40 Vac 50 Vdc / 30Vac 10 1 1 Current (Arms) Current (Arms) 10 0.1 0.1 0.1 µF p = 5 0.47 µF p = 5 1 µF p = 5 2.2 µF p = 5 0.01 0.01 0.1 1 Frequency (kHz) 10 0.1 100 1 Frequency (kHz) 10 100 250 Vdc / 160 Vac 100 Vdc / 63 Vac 10 10 0.01 µF p = 5 0.047 µF p = 5 0.33 µF p = 5 1 Current (Arms) Current (Arms) 1 0.1 0.1 0.01 µF p = 5 0.047 µF p = 5 0.15 µF p = 5 0.01 0.01 0.1 1 Frequency (kHz) 10 100 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.1 1 Frequency (kHz) 10 F3067_RSB • 8/14/2023 100 7 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Maximum Current (Irms) vs. Frequency (Sinusoidal Waveform/Th ≤ 40°C) cont. 500 Vdc / 220 Vac 400 Vdc / 200 Vac 10 1 1 0.0015 µF p = 5 0.0033 µF p = 5 0.015 µF p = 5 Current (Arms) Current (Arms) 10 0.1 0.1 0.0047 µF p = 5 0.022 µF p = 5 0.047 µF p = 5 0.01 0.01 0.1 1 Frequency (kHz) 10 100 10 100 0.1 1 Frequency (kHz) 10 100 630 Vdc / 220 Vac 100 0.001 µF p = 5 0.0022 µF p = 5 0.01 µF p = 5 Current (Arms) 10 1 0.1 0.01 0.1 1 Frequency (kHz) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 8 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Environmental Test Data Damp Heat, Steady State Test Test Conditions: Temperature: Relative humidity (RH): Test duration: Endurance Test +40°C ±2°C 93% ±2% 56 days Test Conditions Temperature: Voltage applied: Test duration: Resistance to Soldering Heat Test +125°C ±2°C 1.25 x VC 2,000 hours Test Conditions Solder bath temperature: Dipping time (with heat screen): 260°C ±5°C 10 seconds ±1 second Performances |Δ C/C| ≤ 5%, Δ tanδ ≤ 0.005 at 1 kHz IR after test ≥ 50% of initial limit Performances |Δ C/C| ≤ 5%, Δ tanδ ≤ 0.003 at 10 kHz for C ≤ 1µF Δ tanδ ≤ 0.002 at 1 kHz for C > 1µF IR after test ≥ 50% of initial limit Performances |Δ C/C| ≤ 2%, Δ tanδ ≤ 0.003 at 10 kHz for C ≤ 1µF Δ tanδ ≤ 0.002 at 1 kHz for C > 1µF IR after test ≥ initial limit Environmental Compliance All KEMET MKT capacitors are RoHS Compliant. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 9 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Table 1 – Ratings & Part Number Reference VDC VAC Capacitance Value (µF) 50 63 63 63 63 63 63 63 63 63 63 63 100 100 100 100 100 100 100 100 100 100 100 100 100 250 250 250 250 250 250 250 250 250 250 30 40 40 40 40 40 40 40 40 40 40 40 63 63 63 63 63 63 63 63 63 63 63 63 63 160 160 160 160 160 160 160 160 160 160 VDC VAC Dimensions in mm Lead Spacing (S) dV/dt (V/ µs) Maximum K0 (V2 /µs) KEMET Part Number Legacy Part Number T H L 2.2 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.07 0.10 0.15 0.22 0.33 0.47 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 6.0 2.5 2.5 2.5 3.5 3.5 4.5 5.0 6.0 6.0 7.2 7.2 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 4.5 5.0 6.0 6.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.5 3.5 11.0 6.5 6.5 6.5 7.5 7.5 9.5 10.0 11.0 11.0 13.0 13.0 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 9.5 10.0 11.0 11.0 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 7.5 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 200 250 250 250 250 250 250 250 250 100 100 100 300 300 300 300 300 300 300 300 300 300 300 300 300 400 400 400 400 400 400 400 400 400 400 20,000 31,500 31,500 31,500 31,500 31,500 31,500 31,500 31,500 12,600 12,600 12,600 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 60,000 200,000 200,000 200,000 200,000 200,000 200,000 200,000 200,000 200,000 200,000 SBCC4220(1)10(2) SBDC3100(1)00(2) SBDC3150(1)00(2) SBDC3220(1)10(2) SBDC3330(1)00(2) SBDC3470(1)10(2) SBDC3680(1)10(2) SBDC4100(1)10(2) SBDC4150(1)10(2) SBDC4220(1)20(2) SBDC4330(1)20(2) SBDC4470(1)20(3) SBEC1470(1)00(2) SBEC1680(1)00(2) SBEC2100(1)00(2) SBEC2150(1)00(2) SBEC2220(1)00(2) SBEC2330(1)00(2) SBEC2470(1)00(2) SBEC2680(1)10(2) SBEC3100(1)00(2) SBEC3150(1)00(2) SBEC3220(1)00(2) SBEC3330(1)00(2) SBEC3470(1)10(2) SBIC1100(1)00(2) SBIC1150(1)00(2) SBIC1220(1)00(2) SBIC1330(1)00(2) SBIC1470(1)00(2) SBIC1680(1)00(2) SBIC2100(1)00(2) SBIC2150(1)00(2) SBIC2220(1)00(2) SBIC2330(1)00(2) RSBCC4220(1)10(2) RSBDC3100(1)00(2) RSBDC3150(1)00(2) RSBDC3220(1)10(2) RSBDC3330(1)00(2) RSBDC3470(1)10(2) RSBDC3680(1)10(2) RSBDC4100(1)10(2) RSBDC4150(1)10(2) RSBDC4220(1)20(2) RSBDC4330(1)20(2) RSBDC4470(1)20(3) RSBEC1470(1)00(2) RSBEC1680(1)00(2) RSBEC2100(1)00(2) RSBEC2150(1)00(2) RSBEC2220(1)00(2) RSBEC2330(1)00(2) RSBEC2470(1)00(2) RSBEC2680(1)10(2) RSBEC3100(1)00(2) RSBEC3150(1)00(2) RSBEC3220(1)00(2) RSBEC3330(1)00(2) RSBEC3470(1)10(2) RSBIC1100(1)00(2) RSBIC1150(1)00(2) RSBIC1220(1)00(2) RSBIC1330(1)00(2) RSBIC1470(1)00(2) RSBIC1680(1)00(2) RSBIC2100(1)00(2) RSBIC2150(1)00(2) RSBIC2220(1)00(2) RSBIC2330(1)00(2) Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) Max K0 (V2 /µs) KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) K = ±10%, M = ±20%, J = ±5% on request. (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 10 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Table 1 – Ratings & Part Number Reference cont. VDC VAC Capacitance Value (µF) 250 250 250 250 400 400 400 400 400 400 400 400 400 400 400 500 500 500 500 500 500 500 500 630 630 630 630 630 630 630 160 160 160 160 200 200 200 200 200 200 200 200 200 200 200 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 VDC VAC Dimensions in mm Lead Spacing (S) dV/dt (V/ µs) Maximum K0 (V2 /µs) KEMET Part Number Legacy Part Number T H L 0.047 0.068 0.10 0.15 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.022 0.033 0.047 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 0.015 0.0010 0.0015 0.0022 0.0033 0.0047 0.0068 0.010 4.5 4.5 5.0 6.0 2.5 2.5 2.5 2.5 2.5 3.5 3.5 3.5 4.5 5.0 6.0 2.5 2.5 3.5 3.5 3.5 4.5 5.0 6.0 2.5 3.5 3.5 4.5 4.5 5.0 6.0 9.5 9.5 10.0 11.0 6.5 6.5 6.5 6.5 6.5 7.5 7.5 7.5 9.5 10.0 11.0 6.5 6.5 7.5 7.5 7.5 9.5 10.0 11.0 6.5 7.5 7.5 9.5 9.5 10.0 11.0 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 400 400 400 400 600 600 600 600 600 600 600 600 600 600 600 700 700 700 700 700 700 700 700 800 800 800 800 800 800 800 200,000 200,000 200,000 200,000 480,000 480,000 480,000 480,000 480,000 480,000 480,000 480,000 480,000 480,000 480,000 700,000 700,000 700,000 700,000 700,000 700,000 700,000 700,000 1,008,000 1,008,000 1,008,000 1,008,000 1,008,000 1,008,000 1,008,000 SBIC2470(1)00(2) SBIC2680(1)00(2) SBIC3100(1)00(2) SBIC3150(1)00(2) SBMC1100(1)00(2) SBMC1150(1)00(2) SBMC1220(1)00(2) SBMC1330(1)00(2) SBMC1470(1)00(2) SBMC1680(1)00(2) SBMC2100(1)00(2) SBMC2150(1)00(2) SBMC2220(1)00(2) SBMC2330(1)00(2) SBMC2470(1)00(2) SBWC1100(1)00(2) SBWC1150(1)00(2) SBWC1220(1)00(2) SBWC1330(1)00(2) SBWC1470(1)00(2) SBWC1680(1)00(2) SBWC2100(1)00(2) SBWC2150(1)00(2) SBPC1100(1)00(2) SBPC1150(1)00(2) SBPC1220(1)00(2) SBPC1330(1)00(2) SBPC1470(1)00(2) SBPC1680(1)00(2) SBPC2100(1)00(2) RSBIC2470(1)00(2) RSBIC2680(1)00(2) RSBIC3100(1)00(2) RSBIC3150(1)00(2) RSBMC1100(1)00(2) RSBMC1150(1)00(2) RSBMC1220(1)00(2) RSBMC1330(1)00(2) RSBMC1470(1)00(2) RSBMC1680(1)00(2) RSBMC2100(1)00(2) RSBMC2150(1)00(2) RSBMC2220(1)00(2) RSBMC2330(1)00(2) RSBMC2470(1)00(2) RSBWC1100(1)00(2) RSBWC1150(1)00(2) RSBWC1220(1)00(2) RSBWC1330(1)00(2) RSBWC1470(1)00(2) RSBWC1680(1)00(2) RSBWC2100(1)00(2) RSBWC2150(1)00(2) RSBPC1100(1)00(2) RSBPC1150(1)00(2) RSBPC1220(1)00(2) RSBPC1330(1)00(2) RSBPC1470(1)00(2) RSBPC1680(1)00(2) RSBPC2100(1)00(2) Capacitance Value (µF) T (mm) H (mm) L (mm) Lead Spacing (S) dV/dt (V/µs) Max K0 (V2 /µs) KEMET Part Number Legacy Part Number (1) Insert lead and packaging code. See Ordering Options Table for available options. (2) K = ±10%, M = ±20%, J = ±5% on request. (3) M = ±20% (only available tolerance). © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 11 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183°C for SnPb eutectic alloy to 217 – 221°C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2, serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3 seconds max 260°C 250 Second Wave First Wave Recommended Soldering Temperature Temperature (°C) 200 400 Soldering Iron Bit Temperature (°C) 350 300 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 12 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Soldering Process cont. Wave Soldering Recommendations cont. 1. The table indicates the maximum set-up temperature of the soldering process Figure 1. Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch ≤ 15 mm > 15 mm ≤ 15 mm > 15 mm Polyester 130°C 130°C 270°C 270°C Polypropylene 110°C 130°C 260°C 270°C Paper 130°C 140°C 270°C 270°C Polyphenylene Sulphide 150°C 160°C 270°C 270°C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160°C Polypropylene 110°C Paper 160°C Polyphenylene Sulphide 160°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 13 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Construction Stacked Molded Plastic Case Detailed Cross Section Molded Plastic Case Single-sided Metallized Polyester Film (First Layer) Self-Extinguishing Resin Single-sided Metallized Polyester Film (Second Layer) Margin Metal Contact Layer Metal Contact Layer Leads © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 14 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Marking FRONT TOP Series Capacitance Capacitance Tolerance Voltage Packaging Quantities Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Short Leads 5 2.5 3.5 4.5 5.0 6.0 7.2 6.5 7.5 9.5 10.0 11.0 13.0 7.2 7.2 7.2 7.2 7.2 7.2 3,000 2,000 1,500 1,000 2,000 1,500 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bulk Standard Reel Long Leads 355 mm 4,000 3,000 2,000 1,500 1,000 750 2,500 1,800 1,400 1,200 1,000 800 Ammo Taped 3,500 2,500 1,900 1,700 1,400 1,150 F3067_RSB • 8/14/2023 15 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Lead Taping & Packaging (IEC 60286–2) Figure 1 — Lead Spacing 5 & 7.5 mm P1 P P2 Figure 2 — Lead Spacing 7.5 mm P P1 ∆h A H0 B W2 W0 P0 F t A H0 Ød W1 P ∆h ∆h ∆h W2 B Ød W0 W1 W W F D0 t t A−B P0 D0 t A−B Dimensions (mm) Symbol Lead Spacing 5 Figure 1 Tolerance Lead wire diameter d 0.5 – 0.6 ±0.05 Taping lead space P 12.7 ±1 Feed hole lead space P0 12.7 ±0.2* Centering of the lead wire P1 3.85 ±0.7 Centering of the body P2 6.35 ±1.3 Lead spacing F 5 +0.6/−0.1 ∆h 0 ±2 H0 ** 18.5 ±0.5 Carrier tape width W 18 +1/−0.5 Hold down tape width W0 6 Minimum Hole position W1 9 ±0.5 Hold down tape position W2 3 Maximum Feed hole diameter D0 4 ±0.2 Tape thickness t 0.7 ±0.2 Description Component alignment Height of component from tape center *Maximum 1 mm on 20 lead spaces. **H0 = 16.5 mm is available upon request. For orders of capacitors with lead space = 7.5 mm, please specify the requested version (Figure 1 or Figure 2). © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 16 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) Ammo Specifications Reel Specifications Dimensions in mm Dimensions in mm H W T D H W 360 * 340 59 355 30 55 maximum * Lower dimension available upon request (maximum 295 mm) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 17 Film Through-Hole Capacitors – General Purpose Metallized Polyester Film Capacitors RSB, 5 mm Lead Spacing, 50 – 630 VDC (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3067_RSB • 8/14/2023 18