SCF29XV-110-1R5A019JV

AC Line Filters Common Mode SCF29XV, SCR29XV & SCT29XV Coils, Automotive Grade Overview Applications The KEMET SCF29XV, SCR29XV & SCT29XV coils are common mode chokes with a wide variety of characteristics for automotive and harsh environment industrial application. These toroidal coils are designed with nanocrystalline metal and Mn-Zn Ferrite cores and are useful in various noise countermeasure fields. • On board charger for EV/PHEV • Wireless charging systems with 85 kHz • Medium power drives for steering, air conditioning and mild hybrid 48 V systems • High voltage automotive and harsh environment industrial EMI filtering Benefits • Operating temperature range from -40°C to +120°C (SCR29XV) • Ultra-high inductance for SCF29XV • Ultra-high permeability for SCR29XV • UL 94 V–0 flame retardant rated base and cap • AEC-Q200 qualified • Nanocrystalline metal core for SCF29XV • Mn-Zn Ferrite S15H for SCR29XV • Mn-Zn Ferrite 7HT for SCT29XV • High rated voltage up to 1,000 V AC/DC • Operating temperature range from -40°C to +150°C (SCF29XV & SCT29XV) Vertical Type Horizontal Type Smaller Footprint Lower Height Part Number System SC F 29X V 080- "Dimension Code Automotive "Rated Current Series Core material Code (See (A)" Grade Dimensions)" SC "F = Nanocrystal core R = Mn-Zn Ferrite core S15H T = Mn-Zn Ferrite core 7HT" 29X V= AEC-Q200 qualified "xxx- = xx.x A Examples: 080 = 8.0 A 200 = 20.0 A" 1R0 Phase Blank = Singlephase A 011 JV Terminal Base "Wire Diameter Windings Number of Turns (mm)" Type "R = Decimal point Examples: 1R0 = 1.0 mm 2R4 = 2.4 mm" A = Single "00x = x turns 0xx = xx turns Examples: 005 = 5 turns 011 = 11 turns" "JV = Vertical type JH = Horizontal type" Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 1 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Magnetic Permeability of Ferrite Material In order to achieve efficient noise reduction, it is important to select the material according to the target frequency band. Depending on its magnetic permeability, a particular ferrite material or metal material will be effective in a certain frequency band. A schematic representation of the relationship between the magnetic permeability of each material and the corresponding effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures. Metal materials, however, are effective throughout the broadband frequency range, in low as well as high frequencies. The effective frequency range varies depending on core shape, size, and number of windings. This frequency dependence of the magnetic permeability as shown in the figure serves for reference purposes only. It should be tested on the actual device to determine its effectiveness. S18H, S15H, 10H, 7H, 7HT, 5H, 5HT, 1400L, and 700L are KEMET’s proprietary ferrite material names. Other materials are available upon request. Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range Higher magnetic permeability: Higher noise suppression effect in the broadband frequency range Nanocrystalline Core Magnetic Permeability 20,000 Higher magnetic permeability: Higher noise suppression effect in the lower frequency range Mn-Zn Series S18H S15H Lower magnetic permeability: Higher noise suppression effect in the higher frequency range 10H 10,000 7H, 7HT 5H, 5HT Ni-Zn Series 0 10 kHz 1400L 700L 100 kHz 1 MHz 10 MHz 100 MHz 1 GHz Effective Frequency Range © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 2 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Dimensions – Millimeters Figure 1 Figure 2 Part Type Dimensions (mm) OD T (Maximum) (Maximum) Base Dimensions² H¹ L BD BT Pin Pitch³ Recommended Hole Pattern4 a a1 b b1 φ Figure SCF29XV-050-1R0A044JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.4 Fig. 1 SCF29XV-060-1R1A036JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.5 Fig. 1 SCF29XV-070-1R2A030JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.6 Fig. 1 SCF29XV-080-1R3A026JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.7 Fig. 1 SCF29XV-090-1R4A022JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.8 Fig. 1 SCF29XV-110-1R5A019JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.0 Fig. 1 SCF29XV-120-1R6A017JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.1 Fig. 1 SCF29XV-150-1R7A015JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.2 Fig. 1 SCF29XV-180-1R8A013JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.4 Fig. 1 SCF29XV-190-1R9A012JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.5 Fig. 1 SCF29XV-200-2R0A011JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.6 Fig. 1 SCF29XV-210-2R1A010JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.7 Fig. 1 SCF29XV-250-2R2A008JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.9 Fig. 1 SCF29XV-270-2R3A006JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 3.0 Fig. 1 SCF29XV-300-2R4A005JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 3.1 Fig. 1 ¹ We do not inspect the lower limit dimension. (design guarantee) ² We do not inspect the terminal base dimension. (design guarantee) ³ Inspection by using pin-pitch gauge. 4 Implementation conditions, please confirm that there is no pre-problem. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 3 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Dimensions – Millimeters cont. Part Type Dimensions (mm) OD T (Maximum) (Maximum) Base Dimensions² H¹ L BD BT Pin Pitch³ Recommended Hole Pattern4 a b a1 b1 φ Figure SCR29XV-050-1R0A044JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.4 Fig. 1 SCR29XV-060-1R1A036JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.5 Fig. 1 SCR29XV-070-1R2A030JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.6 Fig. 1 SCR29XV-080-1R3A026JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.7 Fig. 1 SCR29XV-090-1R4A022JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.8 Fig. 1 SCR29XV-110-1R5A019JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.0 Fig. 1 SCR29XV-120-1R6A017JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.1 Fig. 1 SCR29XV-150-1R7A015JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.2 Fig. 1 SCR29XV-180-1R8A013JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.4 Fig. 1 SCR29XV-190-1R9A012JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.5 Fig. 1 SCR29XV-200-2R0A011JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.6 Fig. 1 SCR29XV-210-2R1A010JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.7 Fig. 1 SCR29XV-250-2R2A008JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.9 Fig. 1 SCR29XV-270-2R3A006JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 3.0 Fig. 1 SCR29XV-300-2R4A005JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 3.1 Fig. 1 SCT29XV-050-1R0A044JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.4 Fig. 1 SCT29XV-060-1R1A036JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.5 Fig. 1 SCT29XV-070-1R2A030JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.6 Fig. 1 SCT29XV-080-1R3A026JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.7 Fig. 1 SCT29XV-090-1R4A022JV 39.0 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 1.8 Fig. 1 SCT29XV-110-1R5A019JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.0 Fig. 1 SCT29XV-120-1R6A017JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.1 Fig. 1 SCT29XV-150-1R7A015JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.2 Fig. 1 SCT29XV-180-1R8A013JV 40.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.4 Fig. 1 SCT29XV-190-1R9A012JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.5 Fig. 1 SCT29XV-200-2R0A011JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.6 Fig. 1 SCT29XV-210-2R1A010JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.7 Fig. 1 SCT29XV-250-2R2A008JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 2.9 Fig. 1 SCT29XV-270-2R3A006JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 3.0 Fig. 1 SCT29XV-300-2R4A005JV 41.5 21.4 36.70 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 20.85 ±0.5 22.5 ±0.5 13.5 ±0.5 22.5 13.5 3.1 Fig. 1 SCF29XV-050-1R0A044JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.4 Fig. 2 SCF29XV-060-1R1A036JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.5 Fig. 2 SCF29XV-070-1R2A030JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.6 Fig. 2 SCF29XV-080-1R3A026JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.7 Fig. 2 SCF29XV-090-1R4A022JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.8 Fig. 2 SCF29XV-110-1R5A019JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.0 Fig. 2 SCF29XV-120-1R6A017JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.1 Fig. 2 SCF29XV-150-1R7A015JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.2 Fig. 2 SCF29XV-180-1R8A013JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.4 Fig. 2 SCF29XV-190-1R9A012JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.5 Fig. 2 SCF29XV-200-2R0A011JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.6 Fig. 2 SCF29XV-210-2R1A010JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.7 Fig. 2 SCF29XV-250-2R2A008JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.9 Fig. 2 SCF29XV-270-2R3A006JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 3.0 Fig. 2 SCF29XV-300-2R4A005JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 3.1 Fig. 2 ¹ We do not inspect the lower limit dimension. (design guarantee) ² We do not inspect the terminal base dimension. (design guarantee) ³ Inspection by using pin-pitch gauge. 4 Implementation conditions, please confirm that there is no pre-problem. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 4 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Dimensions – Millimeters cont. Part Type Dimensions (mm) OD T (Maximum) (Maximum) Base Dimensions² Pin Pitch³ Recommended Hole Pattern4 H¹ L BD BT a b a1 b1 φ Figure SCR29XV-050-1R0A044JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.4 Fig. 2 SCR29XV-060-1R1A036JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.5 Fig. 2 SCR29XV-070-1R2A030JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.6 Fig. 2 SCR29XV-080-1R3A026JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.7 Fig. 2 SCR29XV-090-1R4A022JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.8 Fig. 2 SCR29XV-110-1R5A019JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.0 Fig. 2 SCR29XV-120-1R6A017JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.1 Fig. 2 SCR29XV-150-1R7A015JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.2 Fig. 2 SCR29XV-180-1R8A013JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.4 Fig. 2 SCR29XV-190-1R9A012JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.5 Fig. 2 SCR29XV-200-2R0A011JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.6 Fig. 2 SCR29XV-210-2R1A010JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.7 Fig. 2 SCR29XV-250-2R2A008JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.9 Fig. 2 SCR29XV-270-2R3A006JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 3.0 Fig. 2 SCR29XV-300-2R4A005JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 3.1 Fig. 2 SCT29XV-050-1R0A044JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.4 Fig. 2 SCT29XV-060-1R1A036JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.5 Fig. 2 SCT29XV-070-1R2A030JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.6 Fig. 2 SCT29XV-080-1R3A026JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.7 Fig. 2 SCT29XV-090-1R4A022JH 39.0 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 1.8 Fig. 2 SCT29XV-110-1R5A019JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.0 Fig. 2 SCT29XV-120-1R6A017JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.1 Fig. 2 SCT29XV-150-1R7A015JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.2 Fig. 2 SCT29XV-180-1R8A013JH 40.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.4 Fig. 2 SCT29XV-190-1R9A012JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.5 Fig. 2 SCT29XV-200-2R0A011JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.6 Fig. 2 SCT29XV-210-2R1A010JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.7 Fig. 2 SCT29XV-250-2R2A008JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 2.9 Fig. 2 SCT29XV-270-2R3A006JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 3.0 Fig. 2 SCT29XV-300-2R4A005JH 41.5 37.2 20.90 +1.0/-0.6 3.50 ±0.5 30.20 ±0.5 36.70 ±0.5 22.5 ±0.5 28.5 ±0.5 22.5 28.5 3.1 Fig. 2 ¹ We do not inspect the lower limit dimension. (design guarantee) ² We do not inspect the terminal base dimension. (design guarantee) ³ Inspection by using pin-pitch gauge. 4 Implementation conditions, please confirm that there is no pre-problem. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 5 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Environmental Compliance All KEMET AC line filters are RoHS Compliant. Performance Characteristics Item Performance Characteristics Rated Voltage 1,000 VAC/VDC Withstanding Voltage 2,400 VAC (2 seconds, between lines) Insulation Resistance > 100 MΩ at 1,000 VDC (between lines) Rated Current Range 5 – 30 A Rated Inductance Range 0.270 - 21.200 mH +50%, -30% for SCF29XV type 0.153 - 11.800 mH ±35% for SCR29XV type 0.083 - 6.470 mH ±30% for SCT29XV type Inductance Measurement Condition 100 kHz Operating Temperature Range -40°C to +150°C (include self temperature rise) for SCF29XV & SCT29XV type -40°C to +120°C (include self temperature rise) for SCR29XV type © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 6 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Table 1 – Ratings & Part Number Reference Part Number Rated Voltage AC/DC (V) Rated Current (A) Inductance 100kHz (mH) SCF29XV-050-1R0A044JV SCF29XV-060-1R1A036JV SCF29XV-070-1R2A030JV SCF29XV-080-1R3A026JV SCF29XV-090-1R4A022JV SCF29XV-110-1R5A019JV SCF29XV-120-1R6A017JV SCF29XV-150-1R7A015JV SCF29XV-180-1R8A013JV SCF29XV-190-1R9A012JV SCF29XV-200-2R0A011JV SCF29XV-210-2R1A010JV SCF29XV-250-2R2A008JV SCF29XV-270-2R3A006JV SCF29XV-300-2R4A005JV SCR29XV-050-1R0A044JV SCR29XV-060-1R1A036JV SCR29XV-070-1R2A030JV SCR29XV-080-1R3A026JV SCR29XV-090-1R4A022JV SCR29XV-110-1R5A019JV SCR29XV-120-1R6A017JV SCR29XV-150-1R7A015JV SCR29XV-180-1R8A013JV SCR29XV-190-1R9A012JV SCR29XV-200-2R0A011JV SCR29XV-210-2R1A010JV SCR29XV-250-2R2A008JV SCR29XV-270-2R3A006JV SCR29XV-300-2R4A005JV SCT29XV-050-1R0A044JV SCT29XV-060-1R1A036JV SCT29XV-070-1R2A030JV SCT29XV-080-1R3A026JV SCT29XV-090-1R4A022JV SCT29XV-110-1R5A019JV SCT29XV-120-1R6A017JV SCT29XV-150-1R7A015JV SCT29XV-180-1R8A013JV SCT29XV-190-1R9A012JV SCT29XV-200-2R0A011JV SCT29XV-210-2R1A010JV SCT29XV-250-2R2A008JV SCT29XV-270-2R3A006JV SCT29XV-300-2R4A005JV SCF29XV-050-1R0A044JH SCF29XV-060-1R1A036JH SCF29XV-070-1R2A030JH SCF29XV-080-1R3A026JH SCF29XV-090-1R4A022JH SCF29XV-110-1R5A019JH SCF29XV-120-1R6A017JH SCF29XV-150-1R7A015JH SCF29XV-180-1R8A013JH SCF29XV-190-1R9A012JH SCF29XV-200-2R0A011JH SCF29XV-210-2R1A010JH SCF29XV-250-2R2A008JH SCF29XV-270-2R3A006JH SCF29XV-300-2R4A005JH 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 5 6 7 8 9 11 12 15 18 19 20 21 25 27 30 5 6 7 8 9 11 12 15 18 19 20 21 25 27 30 5 6 7 8 9 11 12 15 18 19 20 21 25 27 30 5 6 7 8 9 11 12 15 18 19 20 21 25 27 30 21.200 +50%, -30% 14.200 +50%, -30% 9.900 +50%, -30% 7.400 +50%, -30% 5.300 +50%, -30% 4.000 +50%, -30% 3.200 +50%, -30% 2.500 +50%, -30% 1.900 +50%, -30% 1.600 +50%, -30% 1.300 +50%, -30% 1.100 +50%, -30% 0.700 +50%, -30% 0.400 +50%, -30% 0.270 +50%, -30% 11.800 ±35% 7.900 ±35% 5.500 ±35% 4.150 ±35% 2.950 ±35% 2.200 ±35% 1.760 ±35% 1.370 ±35% 1.040 ±35% 0.880 ±35% 0.740 ±35% 0.610 ±35% 0.390 ±35% 0.220 ±35% 0.153 ±35% 6.470 ±30% 4.330 ±30% 3.000 ±30% 2.260 ±30% 1.620 ±30% 1.210 ±30% 0.960 ±30% 0.750 ±30% 0.560 ±30% 0.480 ±30% 0.400 ±30% 0.330 ±30% 0.210 ±30% 0.120 ±30% 0.083 ±30% 21.200 +50%, -30% 14.200 +50%, -30% 9.900 +50%, -30% 7.400 +50%, -30% 5.300 +50%, -30% 4.000 +50%, -30% 3.200 +50%, -30% 2.500 +50%, -30% 1.900 +50%, -30% 1.600 +50%, -30% 1.300 +50%, -30% 1.100 +50%, -30% 0.700 +50%, -30% 0.400 +50%, -30% 0.270 +50%, -30% Part Number Rated Voltage AC/DC (V) Rated Current (A) Inductance 100kHz (mH) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com DC Resistance/ Line (mΩ) ±13% 40.300 27.200 19.200 14.200 10.200 8.000 6.430 5.040 3.990 3.280 2.730 2.300 1.680 1.190 0.930 40.300 27.200 19.200 14.200 10.200 8.000 6.430 5.040 3.990 3.280 2.730 2.300 1.680 1.190 0.930 40.300 27.200 19.200 14.200 10.200 8.000 6.430 5.040 3.990 3.280 2.730 2.300 1.680 1.190 0.930 39.900 27.400 19.200 14.200 10.600 8.070 6.450 5.140 4.100 3.350 2.840 2.330 1.680 1.180 0.920 DC Resistance/Line (mΩ) ±13% Temperature Rise (K) Reference 45 45 40 40 35 40 35 45 50 45 40 40 40 35 35 45 45 40 40 35 40 35 45 50 45 40 40 40 35 35 45 45 40 40 35 40 35 45 50 45 40 40 40 35 35 45 45 40 40 35 40 35 45 50 45 40 40 40 35 35 Wire Diameter (mm) Weight (g) Approximate 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 47.2 47.8 47.3 47.9 48.2 48.6 49.0 49.5 48.8 49.5 50.8 51.5 47.0 43.8 43.0 44.7 45.0 45.1 45.4 45.6 45.8 46.3 46.7 46.4 47.5 48.4 49.1 45.1 41.1 39.8 44.1 44.8 44.4 45.0 45.2 45.2 46.3 46.5 46.1 47.1 48.0 48.3 44.7 41.4 39.5 47.8 48.5 48.1 49.0 49.3 49.6 50.2 50.7 49.5 51.5 52.1 53.2 49.4 45.1 44.3 Temperature Rise Wire Diameter (K) (mm) Reference Weight (g) Approximate LF0086_SC29XV • 12/29/2023 7 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Table 1 – Ratings & Part Number Reference cont. Part Number Rated Voltage AC/DC (V) Rated Current (A) Inductance 100kHz (mH) SCR29XV-050-1R0A044JH SCR29XV-060-1R1A036JH SCR29XV-070-1R2A030JH SCR29XV-080-1R3A026JH SCR29XV-090-1R4A022JH SCR29XV-110-1R5A019JH SCR29XV-120-1R6A017JH SCR29XV-150-1R7A015JH SCR29XV-180-1R8A013JH SCR29XV-190-1R9A012JH SCR29XV-200-2R0A011JH SCR29XV-210-2R1A010JH SCR29XV-250-2R2A008JH SCR29XV-270-2R3A006JH SCR29XV-300-2R4A005JH SCT29XV-050-1R0A044JH SCT29XV-060-1R1A036JH SCT29XV-070-1R2A030JH SCT29XV-080-1R3A026JH SCT29XV-090-1R4A022JH SCT29XV-110-1R5A019JH SCT29XV-120-1R6A017JH SCT29XV-150-1R7A015JH SCT29XV-180-1R8A013JH SCT29XV-190-1R9A012JH SCT29XV-200-2R0A011JH SCT29XV-210-2R1A010JH SCT29XV-250-2R2A008JH SCT29XV-270-2R3A006JH SCT29XV-300-2R4A005JH 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 5 6 7 8 9 11 12 15 18 19 20 21 25 27 30 5 6 7 8 9 11 12 15 18 19 20 21 25 27 30 11.800 ±35% 7.900 ±35% 5.500 ±35% 4.150 ±35% 2.950 ±35% 2.200 ±35% 1.760 ±35% 1.370 ±35% 1.040 ±35% 0.880 ±35% 0.740 ±35% 0.610 ±35% 0.390 ±35% 0.220 ±35% 0.153 ±35% 6.470 ±30% 4.330 ±30% 3.000 ±30% 2.260 ±30% 1.620 ±30% 1.210 ±30% 0.960 ±30% 0.750 ±30% 0.560 ±30% 0.480 ±30% 0.400 ±30% 0.330 ±30% 0.210 ±30% 0.120 ±30% 0.083 ±30% Part Number Rated Voltage AC/DC (V) Rated Current (A) Inductance 100kHz (mH) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com DC Resistance/ Line (mΩ) ±13% 39.900 27.400 19.200 14.200 10.600 8.070 6.450 5.140 4.100 3.350 2.840 2.330 1.680 1.180 0.920 39.900 27.400 19.200 14.200 10.600 8.070 6.450 5.140 4.100 3.350 2.840 2.330 1.680 1.180 0.920 DC Resistance/Line (mΩ) ±13% Temperature Rise (K) Reference 45 45 40 40 35 40 35 45 50 45 40 40 40 35 35 45 45 40 40 35 40 35 45 50 45 40 40 40 35 35 Wire Diameter (mm) Weight (g) Approximate 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 45.4 46.2 46.1 46.8 46.8 47.2 47.6 48.0 47.6 48.9 49.6 50.0 46.2 42.1 40.9 45.0 45.7 45.6 46.2 46.3 46.7 47.6 47.6 47.7 48.6 49.4 49.6 45.9 41.9 40.4 Temperature Rise Wire Diameter (K) (mm) Reference Weight (g) Approximate LF0086_SC29XV • 12/29/2023 8 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade 100,000 100,000 10,000 10,000 1,000 1,000 Impedance (Ω) Impedance (Ω) Frequency Characteristics 100 SCF29XV-050-1R0A044JV 10 100 SCF29XV-110-1R5A019JV 10 SCF29XV-060-1R1A036JV SCF29XV-120-1R6A017JV SCF29XV-150-1R7A015JV SCF29XV-070-1R2A030JV 1 1 SCF29XV-080-1R3A026JV SCF29XV-180-1R8A013JV SCF29XV-190-1R9A012JV SCF29XV-090-1R4A022JV 0.1 0.001 0.01 0.1 1 10 0.1 0.001 100 0.01 100,000 100,000 10,000 10,000 1,000 1,000 Impedance (Ω) Impedance (Ω) 0.1 1 100 SCF29XV-200-2R0A011JV 10 SCR29XV-050-1R0A044JV 10 SCF29XV-210-2R1A010JV 1 SCR29XV-060-1R1A036JV SCR29XV-070-1R2A030JV 1 SCF29XV-270-2R3A006JV SCR29XV-080-1R3A026JV SCF29XV-300-2R4A005JV 0.01 0.1 1 10 SCR29XV-090-1R4A022JV 0.1 0.001 100 0.01 0.1 1 100,000 100,000 10,000 10,000 1,000 1,000 100 SCR29XV-110-1R5A019JV 10 SCR29XV-200-2R0A011JV SCR29XV-210-2R1A010JV SCR29XV-150-1R7A015JV 1 SCR29XV-250-2R2A008JV 1 SCR29XV-180-1R8A013JV SCR29XV-270-2R3A006JV SCR29XV-190-1R9A012JV 0.1 100 100 10 SCR29XV-120-1R6A017JV 0.01 10 Frequency (MHz) Impedance (Ω) Impedance (Ω) Frequency (MHz) 0.1 0.001 100 100 SCF29XV-250-2R2A008JV 0.1 0.001 10 Frequency (MHz) Frequency (MHz) 1 10 Frequency (MHz) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com SCR29XV-300-2R4A005JV 100 0.1 0.001 0.01 0.1 1 10 100 Frequency (MHz) LF0086_SC29XV • 12/29/2023 9 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade 100,000 100,000 10,000 10,000 1,000 1,000 Impedance (Ω) Impedance (Ω) Frequency Characteristics cont. 100 SCT29XV-050-1R0A044JV 10 100 SCT29XV-110-1R5A019JV 10 SCT29XV-060-1R1A036JV SCT29XV-120-1R6A017JV SCT29XV-070-1R2A030JV 1 SCT29XV-150-1R7A015JV 1 SCT29XV-080-1R3A026JV SCT29XV-180-1R8A013JV SCT29XV-090-1R4A022JV 0.1 0.001 0.01 0.1 1 10 SCT29XV-190-1R9A012JV 0.1 0.001 100 0.01 0.1 1 100,000 100,000 10,000 10,000 1,000 1,000 100 SCT29XV-200-2R0A011JV 10 SCF29XV-050-1R0A044JH 10 SCT29XV-210-2R1A010JV 1 SCF29XV-060-1R1A036JH SCF29XV-070-1R2A030JH 1 SCT29XV-270-2R3A006JV SCF29XV-080-1R3A026JH SCF29XV-090-1R4A022JH SCT29XV-300-2R4A005JV 0.01 0.1 1 10 0.1 0.001 100 0.01 0.1 1 100,000 100,000 10,000 10,000 1,000 1,000 100 SCF29XV-110-1R5A019JH 10 SCF29XV-200-2R0A011JH SCF29XV-210-2R1A010JH SCF29XV-150-1R7A015JH 1 SCF29XV-250-2R2A008JH 1 SCF29XV-180-1R8A013JH SCF29XV-270-2R3A006JH SCF29XV-190-1R9A012JH 0.1 100 100 10 SCF29XV-120-1R6A017JH 0.01 10 Frequency (MHz) Impedance (Ω) Impedance (Ω) Frequency (MHz) 0.1 0.001 100 100 SCT29XV-250-2R2A008JV 0.1 0.001 10 Frequency (MHz) Impedance (Ω) Impedance (Ω) Frequency (MHz) 1 10 SCF29XV-300-2R4A005JH 100 Frequency (MHz) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.1 0.001 0.01 0.1 1 10 100 Frequency (MHz) LF0086_SC29XV • 12/29/2023 10 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Frequency Characteristics cont. 10,000 10,000 1,000 1,000 Impedance (Ω) 100,000 Impedance (Ω) 100,000 100 SCR29XV-050-1R0A044JH 10 100 SCR29XV-110-1R5A019JH 10 SCR29XV-060-1R1A036JH SCR29XV-120-1R6A017JH SCR29XV-150-1R7A015JH SCR29XV-070-1R2A030JH 1 1 SCR29XV-080-1R3A026JH SCR29XV-180-1R8A013JH SCR29XV-190-1R9A012JH SCR29XV-090-1R4A022JH 0.1 0.001 0.01 0.1 1 10 0.1 0.001 100 0.01 Frequency (MHz) 10,000 1,000 1,000 Impedance (Ω) 10,000 Impedance (Ω) 100,000 100 SCR29XV-200-2R0A011JH SCT29XV-060-1R1A036JH SCT29XV-070-1R2A030JH 1 SCR29XV-270-2R3A006JH SCT29XV-080-1R3A026JH SCT29XV-090-1R4A022JH SCR29XV-300-2R4A005JH 0.01 0.1 1 10 0.1 0.001 100 0.01 100,000 10,000 10,000 1,000 1,000 Impedance (Ω) 100,000 Impedance (Ω) 0.1 100 SCT29XV-110-1R5A019JH SCT29XV-210-2R1A010JH SCT29XV-250-2R2A008JH 1 SCT29XV-180-1R8A013JH SCT29XV-270-2R3A006JH SCT29XV-190-1R9A012JH 0.01 0.1 1 100 SCT29XV-200-2R0A011JH SCT29XV-150-1R7A015JH 0.1 0.001 10 100 10 SCT29XV-120-1R6A017JH 1 1 Frequency (MHz) Frequency (MHz) 10 100 SCT29XV-050-1R0A044JH SCR29XV-250-2R2A008JH 0.1 0.001 10 100 10 SCR29XV-210-2R1A010JH 1 1 Frequency (MHz) 100,000 10 0.1 10 SCT29XV-300-2R4A005JH 100 Frequency (MHz) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 0.1 0.001 0.01 0.1 1 10 100 Frequency (MHz) LF0086_SC29XV • 12/29/2023 11 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Packaging Type Packaging Type SCF29XV-JV SCR29XV-JV SCT29XV-JV SCF29XV-JH SCR29XV-JH SCT29XV-JH Pieces Per Box 120 Tray 80 Recommend Solder Condition Soldering method Temperature Soldering time Number of times Solder iron 400°C Max. 3sec. Max. 2 times Dip soldering 260°C Max. 3sec. Max. 2 times Flow soldering see below see below see below Flow Soldering Condition °C 3 2 4 1 1 Reserve Temperature 2 Preheat Temperature: 80~110°C 3 Soak Temperature: 250°C 4 Cooling Time: 120 seconds Time: 8 seconds Solder conditions are for reference only and should be confirmed by the customer there is no problem. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 12 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Temperature Rise Measuring Method Connect the cable to the CMC by soldering and cool it to room temperature. Also, N1 and N2 are shorted. In order to prevent temperature changes due to air convections, a rated current is applied to the CMC inside the container (container size: about 550 x 450 x 300 mm). At that time, the temperature of the inner diameter of the CMC and the ambient temperature are measured with a thermocouple and recorded with a data logger. Figure 1 - Measurement system Figure 2 - Schematics After confirming that the temperature of the CMC has stabilized, turn off the power and calculate the temperature rise value from the measured data using the following formula. T = (t2-ta2)-(t1-ta1) And then, T : Temperature rising (°C) t1 : Initial temperature of CMC (°C) t2 : Temperature of CMC when current is applied (°C) ta1 : Initial ambient temperature (°C) ta2 : Ambient temperature when current is applied (°C) © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 13 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade Handling Precautions Precautions for product storage AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70% relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the product. For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt. Product temperature rise values The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency) is applied. When using the product, check and evaluate the value of the core temperature rise under actual operating conditions. KEMET Corporation WH KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 14 AC Line Filters – Common Mode SCF-XV Coils, Automotive Grade KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight. All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the International Traffic in Arms Regulations (ITAR), the US Export Administration Regulations (EAR) and the Japan Foreign Exchange and Foreign Trade Act. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com LF0086_SC29XV • 12/29/2023 15