AC Line Filters
Common Mode SS Coils, 26V Series
Overview
Applications
The KEMET SS coils are common mode chokes with a
wide variety of characteristics. These gear type coils are
designed with our proprietary ferrite cores and are useful in
various noise countermeasure fields.
• Audio-visual equipment
• Office automation equipment
• Digital appliances
• Power supplies
Benefits
• Proprietary 5H and 10H ferrite materials and equivalents
• Suitable for ≥ 150 kHz range
• Wide variety of sizes and specifications
• Operating temperature range from −25°C to +120°C
• UL 94 V–0 flame retardant rated base and bobbin
Part Number System
SS
26
V-
R
05
1170
Series
Core Size Code
Core Orientation
Core Type
Rated Current (A)
Inductance (mH) Minimum
SS
26
V = Vertical
Blank = Standard
R = High permeability
0x = 0.x A
xx = x.x A
Examples:
05 = 0.5 A
25 = 2.5 A
xxx0 = xxx mH
0xxx = xx mH
00xx = x.x mH
Examples:
1170 = 117 mH
0162 = 16.2 mH
0038 = 3.8 mH
One world. One KEMET
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0030_SS26V • 1/31/2020
1
AC Line Filters – Common Mode SS Coils, 26V Series
Magnetic Permeability of Ferrite Material
In order to achieve most efficient noise reduction, it is important to select the material according to the target frequency
band. Depending on its magnetic permeability, a particular ferrite material will be effective in a certain frequency band.
A schematic representation of the relationship between the magnetic permeability of each material and the corresponding
effective band range is shown in Figure 1. Materials with higher magnetic permeability are effective in the lower frequency
range, while those with lower magnetic permeability are effective in the higher frequency range. Thus, Mn-Zn products are
mainly used for reducing conduction noise, while Ni-Zn products are commonly used for radiation noise countermeasures.
The effective frequency range varies depending on core shape, size and number of windings. This frequency dependence
of the magnetic permeability as shown in the figure serves for reference purposes only and it should be tested on the actual
device to determine its effectiveness.
S18H, S15H, 10H, 7H, 5H, 1400L and 700L are KEMET’s proprietary ferrite material names. Other materials can also be
available on request.
Figure 1 - Relationship between the magnetic permeability of each material and its effective frequency range
20,000
Higher magnetic permeability:
Higher noise suppression effect
in the lower frequency range
Mn-Zn Series
Magnetic Permeability
S18H
S15H
10H
10,000
Lower magnetic permeability:
Higher noise suppression effect
in the higher frequency range
7H
5H
Ni-Zn Series
0
10 kHz
1400L
700L
100 kHz
1 MHz
10 MHz
100 MHz
1 GHz
Effective Frequency Range
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0030_SS26V • 1/31/2020
2
AC Line Filters – Common Mode SS Coils, 26V Series
Dimensions – Millimeters
Marking
ø0.8±0.1
13.0±0.5
10
30.5±1.0
13
10.0±0.5
26.0±1.0
20.5±1.0
Environmental Compliance
All KEMET AC Line Filters are RoHS Compliant.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0030_SS26V • 1/31/2020
3
AC Line Filters – Common Mode SS Coils, 26V Series
Performance Characteristics
Item
Performance Characteristics
Rated Voltage
Withstanding Voltage
Insulation Resistance
Rated Current Range
Rated Inductance Range
Inductance Measurement Condition
Thermal Class
Operating Temperature Range
250 VAC
2,400 VAC (2 seconds, between lines)
> 100 MΩ at 500 VDC (between lines)
0.5 – 3.0 A
2.8 – 117.0 mH minimum
1 kHz
E (120°C)
−25°C to +120°C (include self temperature rise)
Table 1 – Ratings & Part Number Reference
Part Number
Rated
Current
(A)
Inductance
(mH)
Minimum
DC Resistance/
Line (Ω)
Maximum
Temperature
Rise (K)
Maximum
Marking
Weight (g)
Approximate
SS26V-050880
SS26V-060640
SS26V-070510
SS26V-080350
SS26V-100250
SS26V-120169
SS26V-150121
SS26V-180092
SS26V-200076
SS26V-250046
SS26V-300028
SS26V-R051170
SS26V-R060860
SS26V-R070680
SS26V-R080470
SS26V-R100330
SS26V-R120220
SS26V-R150162
SS26V-R180123
SS26V-R200102
SS26V-R250061
SS26V-R300038
0.5
0.6
0.7
0.8
1.0
1.2
1.5
1.8
2.0
2.5
3.0
0.5
0.6
0.7
0.8
1.0
1.2
1.5
1.8
2.0
2.5
3.0
88.0
64.0
51.0
35.0
25.0
16.9
12.1
9.2
7.6
4.6
2.8
117.0
86.0
68.0
47.0
33.0
22.0
16.2
12.3
10.2
6.1
3.8
2.40
1.80
1.40
1.00
0.70
0.55
0.40
0.30
0.25
0.15
0.10
2.40
1.80
1.40
1.00
0.70
0.55
0.40
0.30
0.25
0.15
0.10
45
45
50
45
45
50
50
50
50
50
50
45
45
50
45
45
50
50
50
50
50
50
05 Lot No.
06 Lot No.
07 Lot No.
08 Lot No.
10 Lot No.
12 Lot No.
15 Lot No.
18 Lot No.
20 Lot No.
25 Lot No.
30 Lot No.
R05 Lot No.
R06 Lot No.
R07 Lot No.
R08 Lot No.
R10 Lot No.
R12 Lot No.
R15 Lot No.
R18 Lot No.
R20 Lot No.
R25 Lot No.
R30 Lot No.
25.3
25.4
25.2
25.0
25.8
22.6
23.5
24.3
25.9
24.3
23.0
25.3
25.4
25.2
25.0
25.8
22.6
23.5
24.3
25.9
24.3
23.0
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0030_SS26V • 1/31/2020
4
AC Line Filters – Common Mode SS Coils, 26V Series
Frequency Characteristics
1M
SS26V-050880
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
1k
100
10
1
1
1k
1M
10k
100k
Frequency (Hz)
1M
10M
1k
30M
SS26V-070510
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
10M
30M
100k
1M
10M
30M
100k
1M
10M
30M
100k
1M
10M
30M
SS26V-080350
100
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SS26V-100250
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
1M
1k
100k
1k
100
10
10k
Frequency (Hz)
SS26V-120169
1k
100
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SS26V-150121
1M
100k
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
Frequency (Hz)
1
1k
1M
10k
10
1
1M
SS26V-060640
1k
100
10
10k
Frequency (Hz)
SS26V-180092
1k
100
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
1k
10k
Frequency (Hz)
LF0030_SS26V • 1/31/2020
5
AC Line Filters – Common Mode SS Coils, 26V Series
Frequency Characteristics cont.
1M
SS26V-200076
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
1k
100
10
1
1
1k
1M
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SS26V-300028
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
10M
30M
100k
1M
10M
30M
100k
1M
10M
30M
100k
1M
10M
30M
SS26V-R051170
100
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SS26V-R060860
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
1M
1k
100k
1k
100
10
10k
Frequency (Hz)
SS26V-R070680
1k
100
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SS26V-R080470
1M
100k
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
Frequency (Hz)
1
1k
1M
10k
10
1
1M
SS26V-250046
1k
100
10
10k
Frequency (Hz)
SS26V-R100330
1k
100
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
1k
10k
Frequency (Hz)
LF0030_SS26V • 1/31/2020
6
AC Line Filters – Common Mode SS Coils, 26V Series
Frequency Characteristics cont.
1M
SS26V-R120220
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
1k
100
10
10
1
1
1k
1M
10k
100k
Frequency (Hz)
1M
10M
1k
30M
SS26V-R180123
1M
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
100k
1k
100
10
100k
1M
10M
30M
100k
1M
10M
30M
100k
1M
10M
30M
Frequency (Hz)
SS26V-R200102
1k
100
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
1k
SS26V-R250061
1M
100k
10k
10k
Impedance (Ω)
100k
Impedance (Ω)
10k
10
1
1M
SS26V-R150162
1k
100
10
10k
Frequency (Hz)
SS26V-R300038
1k
100
10
1
1
1k
10k
100k
Frequency (Hz)
1M
10M
30M
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
1k
10k
Frequency (Hz)
LF0030_SS26V • 1/31/2020
7
AC Line Filters – Common Mode SS Coils, 26V Series
Packaging
Type
Packaging Type
Pieces Per Box
SS26V
Tray
350
Handling Precautions
Precautions for product storage
AC Line Filters should be stored in normal working environments. While the chokes themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and
long term storage.
KEMET recommends that maximum storage temperature not exceed 40°C and maximum storage humidity not exceed 70%
relative humidity. Atmospheres should be free of chlorine and sulfur bearing compounds. Temperature fluctuations should
be minimized to avoid condensation on the parts. Avoid storage near strong magnetic fields, as this might magnetize the
product.
For optimized solderability, AC line filters stock should be used promptly and preferably within 6 months of receipt.
Product temperature rise values
The values listed for temperature rise are the result of self-heating in wires when the rated current (commercial frequency)
is applied.
When using the product, check and evaluate the value of the core temperature rise under actual operating conditions.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0030_SS26V • 1/31/2020
8
AC Line Filters – Common Mode SS Coils, 26V Series
KEMET Electronics Corporation Sales Offices
For a complete list of our global sales offi ces, please visit www.kemet.com/sales.
Disclaimer
All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for
checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such
applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use.
The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no
obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or
property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
When providing KEMET products and technologies contained herein to other countries, the customer must abide by the procedures and provisions stipulated in all
applicable export laws and regulations, including without limitation the International Traffi c in Arms Regulations (ITAR), the US Export Administration Regulations
(EAR) and the Japan Foreign Exchange and Foreign Trade Act.
KEMET is a registered trademark of KEMET Electronics Corporation.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
LF0030_SS26V • 1/31/2020
9