T499D106K050ATE1K0

Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO2 175°C Overview The KEMET T499 Series is a high-temperature product that offers optimum performance characteristics in applications with operating temperatures up to 175°C. Advanced materials and testing allow this series to perform with a reliability level of 0.5%/1,000 hours at rated voltage and temperature. This series is classified as MSL (Moisture Sensitivity Level) 1 under J STD 020: unlimited floor life time at ≤ 30°C/85% RH. This series is available in five standard EIA case sizes with RoHS-compliant terminations as standard. Benefits • Meets or exceeds EIA Standard 535BAAC • Taped and reeled per EIA 481 • Symmetrical, compliant terminations • Optional gold-plated terminations • Laser-marked case • 100% surge current testing • Complies with AEC–Q200 • Capacitance values of 0.15 μF to 220 μF • Tolerances of ±10% and ±20% • Voltage rating of 6 to 50 VDC • 100% steady-state accelerated aging • Voltage derating is 1/2 at 175°C • RoHS Compliant and lead-free terminations standard • Operating temperature range of −55˚C to +175˚C Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Applications Typical applications include decoupling and filtering in industrial and automotive end applications, such as DC/DC converters, portable electronics, telecommunications, and control units operating at temperatures up to 175°C. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 1 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET’s K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 499 X 227 M 010 A T E500 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Failure Rate/ Design Termination Finish ESR A B C D X First two digits represent significant figures. Third digit specifies number of zeros. 006 = 6.3 010 = 10 015 = 15 020 = 20 025 = 25 035 = 35 050 = 50 A = N/A T= Tantalum High Temperature 175ºC K = ±10% M = ±20% T = 100% Matte Tin E = ESR (Sn) plated Last three G = Gold plated digits H = Standard specify solder coated ESR in mΩ (SnPb 5% Pb (500 = minimum) 500 mΩ) Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel 7027 = Moisture Barrier Bag Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range −55°C to 175°C 0.15 – 220 μF at 120 Hz/25°C K Tolerance (10%), M Tolerance (20%) 6 – 50 V DF(120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01 CV (µA) at rated voltage after 5 minutes © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 2 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Qualification Test Condition Characteristics Δ C/C Endurance 175°C at 1/2 rated voltage, 2,000 hours Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Δ C/C Storage Life 175°C at 0 volts, 2,000 hours Temperature Stability MIL–STD–202, Method 107, Condition B, mounted, −55°C to 175°C, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25ºC, −55ºC, +25ºC, +85ºC, +175ºC, +25ºC Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits Mechanical Shock/ Vibration Within ±5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25°C −55°C +85°C +175°C Δ C/C IL* ±10% ±10% ±30% DF IL IL 1.5 x IL 1.5 x IL DCL IL N/A 10 x IL 12 x IL Δ C/C Surge Voltage Within ±10% of initial value DF Δ C/C Thermal Shock Within ±10% of initial value DF 85°C, 1.32 x rated voltage 1,000 cycles (150°C, 1.2 x rated voltage) MIL–STD–202, Method 213, Figure 1, Condition F, 1,500g peak MIL–STD–202, Method 214, 5g for 20 minutes/12 cycles each of 3 orientations. Test from 10 to 2,000 Hz Within ±5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits *IL = Initial Limit Certification KEMET’s Internal Qualification Plan for this Tantalum series of capacitors follows AEC–Q200 guidelines. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 3 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1,000 1,000 T499B106M010ATE1K8 T499B106M010ATE3K5_IMP T499D476M010ATE600 100 T499X227M010ATE500 100 T499B106M010ATE3K5_ESR Capacitance (µF) Impedance, ESR (Ohms) T499D476M010ATE600_IMP T499X227M010ATE500_IMP T499D476M010ATE600_ESR T499X227M010ATE500_ESR 10 1 0.1 10 1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 0.1 10,000,000 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) 10,000,000 Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B H X T S G Termination cutout at KEMET's option, either end S Case Size KEMET EIA F E P R L Component L W H F ±0.1 S ±0.3 B ±0.15(Ref) ±(0.004) ±(0.012) ±0.006 X (Ref) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) A 3.2±0.2 1.6±0.2 1.6±0.2 3216–18 (0.126±0.008) (0.063±0.008) (0.063±0.008) 1.2 (0.047) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 (0.004±0.004) 0.4 (0.016) 0.4 (0.016) 0.13 (0.005) 1.2 (0.047) 1.1 (0.043) 1.3 (0.051) B 3.5±0.2 2.8±0.2 1.9±0.2 3528–21 (0.138±0.008) (0.110±0.008) (0.075±0.008) 2.2 (0.087) 0.8 (0.031) 0.4 (0.016) 0.10±0.10 (0.004±0.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) C 6.0±0.3 3.2±0.3 2.5±0.3 6032–28 (0.236±0.012) (0.126±0.012) (0.098±0.012) 2.2 (0.087) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.1 (0.122) 2.8 (0.110) 2.4 (0.094) D 7.3±0.3 4.3±0.3 2.8±0.3 7343–31 (0.287±0.012) (0.169±0.012) (0.110±0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) X 7.3±0.3 4.3±0.3 4.0±0.3 7343–43 (0.287±0.012) (0.169±0.012) (0.157±0.012) 2.4 (0.094) 1.3 (0.051) 0.5 (0.020) 0.10±0.10 (0.004±0.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.8 (0.150) 3.5 (0.138) 3.5 (0.138) Notes: (Ref) – Dimensions provided for reference only. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 4 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Table 1 – Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +20ºC Max/5 Min 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 16 16 16 16 16 16 16 16 6.8 10 15 22 22 33 33 47 47 68 100 1.5 2.2 3.3 4.7 4.7 6.8 6.8 10 10 15 15 22 22 33 33 47 68 100 220 1 1.5 2.2 3.3 3.3 4.7 6.8 6.8 6.8 10 10 15 22 22 B/3528-21 B/3528-21 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 A/3216-18 B/3528-21 B/3528-21 C/6032-28 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 A/3216-18 B/3528-21 C/6032-28 B/3528-21 C/6032-28 C/6032-28 C/6032-28 D/7343-31 T499B685(1)006A(2)E3K5 T499B106(1)006A(2)E3K5 T499B156(1)006A(2)E3K5 T499B226(1)006A(2)E3K5 T499C226(1)006A(2)E1K8 T499B336(1)006A(2)E3K0 T499C336(1)006A(2)E1K8 T499C476(1)006A(2)E1K8 T499D476(1)006A(2)E800 T499C686(1)006A(2)E1K2 T499D107(1)006A(2)E800 T499A155(1)010A(2)E8K0 T499A225(1)010A(2)E8K0 T499A335(1)010A(2)E6K0 T499A475(1)010A(2)E6K0 T499B475(1)010A(2)E3K5 T499A685(1)010A(2)E6K0 T499B685(1)010A(2)E3K5 T499B106(1)010A(2)E3K5 T499C106(1)010A(2)E1K8 T499B156(1)010A(2)E3K5 T499C156(1)010A(2)E1K8 T499B226(1)010A(2)E3K0 T499C226(1)010A(2)E1K8 T499C336(1)010A(2)E1K8 T499D336(1)010A(2)E1K6 T499D476(1)010A(2)E800 T499D686(1)010A(2)E800 T499D107(1)010A(2)E700 T499X227(1)010A(2)E500 T499A105(1)016A(2)E10K T499A155(1)016A(2)E8K0 T499A225(1)016A(2)E6K0 T499A335(1)016A(2)E6K0 T499B335(1)016A(2)E3K5 T499B475(1)016A(2)E6K0 T499A685(1)016A(2)E7K0 T499B685(1)016A(2)E3K5 T499C685(1)016A(2)E1K8 T499B106(1)016A(2)E3K5 T499C106(1)016A(2)E1K8 T499C156(1)016A(2)E1K8 T499C226(1)016A(2)E1K6 T499D226(1)016A(2)E800 VDC at 85ºC µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size DF ESR 0.5 0.6 0.9 1.4 1.4 2.1 2.1 3.0 3.0 4.3 6.3 0.5 0.5 0.5 0.5 0.5 0.7 0.7 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 6.8 10.0 22.0 0.5 0.5 0.5 0.5 0.5 0.8 1.1 1.1 1.1 1.6 1.6 2.4 3.5 3.5 % at +20ºC 120 Hz Max 6 6 6 6 6 6 6 6 6 6 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 4 6 6 6 6 6 6 6 6 6 6 6 6 6 (See below for part options) µA at +20ºC Max/5 Min % at +20ºC 120 Hz Max mΩ at +20ºC 100 kHz Max 3500 3500 3500 3500 1800 3000 1800 1800 800 1200 800 8000 8000 6000 6000 3500 6000 3500 3500 1800 3500 1800 3000 1800 1800 1600 800 800 700 500 10000 8000 6000 6000 3500 6000 7000 3500 1800 3500 1800 1800 1600 800 mΩ at +20ºC 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current mA at +25ºC 100 kHz 156 156 156 156 247 168 247 247 433 303 433 97 97 112 112 156 112 156 156 247 156 247 168 247 247 306 433 433 463 574 87 97 112 112 156 119 104 156 247 156 247 247 262 433 mA at +85ºC 100 kHz 140.4 140 140 140 222 151 222 222 390 273 390 87 87 101 101 140 101 140 140 222 140 222 151 222 222 275 390 390 417 517 78 87 101 101 140 107 94 140 222 140 222 222 236 390 mA at +125ºC 100 kHz 62.4 62 62 62 99 67 99 99 173 121 173 39 39 45 45 62 45 62 62 99 62 99 67 99 99 122 173 173 185 230 35 39 45 45 62 48 42 62 99 62 99 99 105 173 mA at +25ºC 100 kHz mA at +85ºC 100 kHz mA at +125ºC 100 kHz Maximum Allowable Ripple Current Maximum Operating Temp ºC 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 MSL Reflow Temp ≤ 260ºC 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ºC Reflow Temp ≤ 260ºC Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 5 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Table 1 – Ratings & Part Number Reference cont'd Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage VDC at 85ºC µF KEMET/EIA (See below for part options) µA at +20ºC Max/5 Min 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 33 47 100 0.68 1 1.5 2.2 3.3 4.7 4.7 6.8 10 15 15 22 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 6.8 10 10 15 22 33 0.15 0.22 0.33 0.47 0.68 1 1 1.5 2.2 3.3 4.7 6.8 10 22 33 3.3 4.7 10 D/7343-31 D/7343-31 X/7343-43 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-21 C/6032-28 C/6032-28 C/6032-28 D/7343-31 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 A/3216-18 A/3216-18 A/3216-18 B/3528-21 B/3528-21 A/3216-18 B/3528-21 C/6032-28 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 X/7343-43 X/7343-43 D/7343-31 D/7343-31 D/7343-31 T499D336(1)016A(2)E800 T499D476(1)016A(2)E800 T499X107(1)016A(2)E300 T499A684(1)020A(2)E12K T499A105(1)020A(2)E10K T499A155(1)020A(2)E8K0 T499B225(1)020A(2)E3K5 T499B335(1)020A(2)E3K5 T499B475(1)020A(2)E3K5 T499C475(1)020A(2)E2K4 T499C685(1)020A(2)E1K9 T499C106(1)020A(2)E1K8 T499C156(1)020A(2)E1K7 T499D156(1)020A(2)E1K0 T499D226(1)020A(2)E800 T499A474(1)025A(2)E14K T499A684(1)025A(2)E10K T499A105(1)025A(2)E8K0 T499A155(1)025A(2)E5K0 T499B225(1)025A(2)E4K5 T499C335(1)025A(2)E2K5 T499C475(1)025A(2)E2K4 T499C685(1)025A(2)E1K9 T499D685(1)025A(2)E1K1 T499C106(1)025A(2)E1K5 T499D106(1)025A(2)E1K0 T499D156(1)025A(2)E1K0 T499D226(1)025A(2)E800 T499D336(1)025A(2)E700 T499A154(1)035A(2)E19K T499A224(1)035A(2)E18K T499A334(1)035A(2)E15K T499B474(1)035A(2)E8K0 T499B684(1)035A(2)E6K5 T499A105(1)035A(2)E10K T499B105(1)035A(2)E5K0 T499C155(1)035A(2)E4K5 T499C225(1)035A(2)E3K5 T499C335(1)035A(2)E2K5 T499C475(1)035A(2)E2K5 T499D685(1)035A(2)E1K3 T499D106(1)035A(2)E1K0 T499X226(1)035A(2)E700 T499X336(1)035A(2)E600 T499D335(1)050A(2)E2K0 T499D475(1)050A(2)E900 T499D106(1)050A(2)E1K0 VDC at 85ºC µF KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size DF ESR 5.3 7.5 16.0 0.5 0.5 0.5 0.5 0.7 0.9 0.9 1.4 2.0 3.0 3.0 4.4 0.5 0.5 0.5 0.5 0.6 0.8 1.2 1.7 1.7 2.5 2.5 3.8 5.5 8.3 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 1.2 1.6 2.4 3.5 7.7 11.6 1.7 2.4 5.0 % at +20ºC 120 Hz Max 6 6 6 4 4 6 6 6 6 6 6 6 6 6 6 4 4 4 6 6 6 6 6 6 6 6 6 6 6 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 4.5 6 (See below for part options) µA at +20ºC Max/5 Min % at +20ºC 120 Hz Max mΩ at +20ºC 100 kHz Max 800 800 300 12000 10000 8000 3500 3500 3500 2400 1900 1800 1700 1000 800 14000 10000 8000 5000 4500 2500 2400 1900 1100 1500 1000 1000 800 700 19000 18000 15000 8000 6000 10000 5000 4500 3500 2500 2500 1300 1000 700 600 2000 900 1000 mΩ at +20ºC 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current mA at +25ºC 100 kHz 433 433 742 79 87 97 156 156 156 214 241 247 254 387 433 73 87 97 122 137 210 214 241 369 271 387 387 433 463 63 65 71 103 119 87 130 156 177 210 210 340 387 486 524 274 408 387 mA at +85ºC 100 kHz 390 390 668 71 78 87 140 140 140 193 217 222 229 348 390 66 78 87 110 123 189 193 217 332 244 348 348 390 417 57 59 64 93 107 78 117 140 159 189 189 306 348 437 472 247 367 348 mA at +125ºC 100 kHz 173 173 297 32 35 39 62 62 62 86 96 99 102 155 173 29 35 39 49 55 84 86 96 148 108 155 155 173 185 25 26 28 41 48 35 52 62 71 84 84 136 155 194 210 110 163 155 mA at +25ºC 100 kHz mA at +85ºC 100 kHz mA at +125ºC 100 kHz Maximum Allowable Ripple Current Maximum Operating Temp ºC 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 175 MSL Reflow Temp ≤ 260ºC 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ºC Reflow Temp ≤ 260ºC Maximum Operating Temp MSL (1) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates Capacitance tolerance. (2) To complete KEMET part number, insert T = 100% Matte Tin (Sn) Plated, G = Gold Plated, H = Standard Solder coated (SnPb 5% Pb minimum). Designates Termination Finish. Refer to Ordering Information for additional detail. Higher voltage ratings and tighter tolerance product including ESR may be substituted within the same size at KEMET's option. Voltage substitution will be marked with the higher voltage rating. Substitutions can include better than series. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 6 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Recommended Voltage Derating Guidelines Working Voltage 85°C 6.3 10 16 20 25 35 50 6.3 10 16 20 25 35 50 Recommended Application Voltage (for maximum reliability) 175°C 3.15 5.00 8.00 10.00 12.50 17.50 25.00 85°C 3.15 5 8 10 12.5 17.5 25 175°C 1.58 2.50 4.00 5.00 6.25 8.75 12.50 120% 100% % Working Voltage Rated Voltage % Change in Working DC Voltage with Temperature 80% 60% 20% 0% 50% Recommended Maximum Application Voltage (As % of Rated Voltage) 40% -55 25 25% 85 125 175 Temperature (ºC) Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 25°C 1.00 T ≤ 85°C 0.90 T ≤ 125°C 0.40 T ≤ 175°C 0.20 T= Environmental Temperature The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. KEMET Series and Case Code EIA Case Code Maximum Power Dissipation (P max) mWatts at 25°C with +20°C Rise A 3216–18 75 B C D X E S T U V T510X T510E 3528–21 6032–28 7343–31 7343–43 7360–38 3216–12 3528–12 6032–15 7343–20 7343–43 7360–38 85 110 150 165 200 60 70 90 125 270 285 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = Z √P max/R I = rms ripple current (amperes) E = rms ripple voltage (volts) P max = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 7 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25°C 85°C 125°C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–25 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 X1 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 2 Height of these chips may create problems in wave soldering. Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 8 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (t s) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/seconds maximum 3°C/seconds maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (t L) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** Peak Temperature (TP) Time within 5°C of Maximum 20 seconds maximum 30 seconds maximum Peak Temperature (t P) Ramp-down Rate (TP to TL) 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. *Case Size D, E, P, Y, and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W, and Z TP TL Temperature KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp Up Rate = 3ºC/sec Maximum Ramp Down Rate = 6ºC/sec tL Tsmax Tsmin 25 ts 25ºC to Peak Time Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature – reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40ºC and maximum storage humidity not exceed 60% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 9 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Construction Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Tantalum Wire Leadframe (− Cathode) Washer Tantalum Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case MnO2 (Second Layer) Washer Ta2O5 Dielectric (First Layer) Tantalum Capacitor Marking Date Code * Polarity Indicator (+) 1st digit = Last number of Year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year Picofarad Code Rated Voltage KEMET ID & High Temperature 175°C Date Code* * 230 = 30th week of 2012 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 10 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. 8 mm (0.315") or 12 mm (0.472") Top Tape Thickness 0.10 mm (0.004") Maximum Thickness 180 mm (7.0") or 330 mm (13.0") Table 3 – Packaging Quantity Case Code KEMET S T M U L W Z V A B C D Q Y X E/T428P H EIA 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-12 7343-40 7343-43 7360-38 7360-20 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 12 12 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 1,000 500 500 500 1,000 10,000 10,000 8,000 5,000 3,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 3,000 2,000 2,000 2,000 2,500 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 11 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 [10 pitches cumulative tolerance on tape ± 0.2 mm] Po ØDo E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity ØD Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 4 1 User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 8 mm 12 mm 16 mm 1.5+0.10/−0.0 (0.059+0.004/−0.0) D1 Minimum Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 2.0±0.05 (0.079±0.002) 1.75±0.10 4.0±0.10 (0.069±0.004) (0.157±0.004) 2.0±0.1 (0.079±0.059) R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum 25.0 (0.984) 0.600 0.600 0.100 30 (0.024) (0.024) (0.004) (1.181) Variable Dimensions — Millimeters (Inches) B1 Maximum Tape Size Pitch Note 4 4.35 8 mm Single (4 mm) (0.171) Single (4 mm) 8.2 12 mm & Double (8 (0.323) mm) 12.1 16 mm Triple (12 mm) (0.476) E2 Minimum F 6.25 (0.246) 3.5±0.05 (0.138±0.002) 10.25 (0.404) 14.25 (0.561) P1 2.0±0.05 or 4.0±0.10 (0.079±0.002 or 0.157±0.004) 2.0±0.05 (0.079±0.002) or 5.5±0.05 4.0±0.10 (0.157±0.004) or (0.217±0.002) 8.0±0.10 (0.315 ±0.004) 7.5±0.10 4.0±0.10 (0.157±0.004) (0.295±0.004) to 12.0±0.10 (0.472±0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) 8.0 (0.315) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 12 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 Newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16 – 200 10 Bo ° T) Typical Component Centerline Ao Figure 3 – Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum ° s Tape Width (mm) 8,12 16 – 56 72 – 200 Maximum Rotation ( 20 10 5 Figure 4 – Bending Radius Embossed Carrier 16 mm Tape ° S) Punched Carrier 1.0 mm maximum 1.0 mm maximum R Bending Radius © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com R T2054_T499_AUTO • 9/15/2016 13 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178±0.20 (7.008±0.008) or 330±0.20 (13.000±0.008) 1.5 (0.059) 13.0+0.5/−0.2 (0.521+0.02/−0.008) 20.2 (0.795) 12 mm 16 mm Variable Dimensions — Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4+1.5/−0.0 (0.331+0.059/−0.0) 12.4+2.0/−0.0 (0.488+0.078/−0.0) 16.4+2.0/−0.0 (0.646+0.078/−0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) Shall accommodate tape width without interference 8 mm 12 mm 16 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 14 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only END Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm Minimum Components 100 mm Minimum Leader 400 mm Minimum Top Cover Tape Figure 7 – Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm Maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 15 Tantalum Surface Mount Capacitors – Automotive Grade T499 Series Automotive Grade MnO 2 175°C KEMET Electronic Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com T2054_T499_AUTO • 9/15/2016 16