T541X227K016AT8710

KEMET Organic Capacitor (KO-CAP®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode capable of delivering very low ESR and improved capacitance retention at high frequencies. KO-CAP combines the low ESR of multilayer ceramic, the high capacitance of aluminum electrolytic, and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and high ripple current capabilities. The HRA Polymer Electrolytic offers the same performance advantages as other KO-CAP series with screening options associated with high reliability (Hi-Rel) applications. These HRA grade components offer several surge current screening options. The recommended application derating for these capacitors is 10 – 20%, rendering them suitable for application voltages from 2.5 to 63 VDC. These are the first polymer electrolytic capacitors available with failure rate options as defined by KEMET's KO-CAP Reliability Assessment method. This method utilizes accelerated conditions (voltage and temperature) applied to board-mounted samples to assess long term device reliability. The failure rates available are B (0.1% per 1,000 hours), C (0.01% per 1,000 hours), and D (0.001% per 1,000 hours). The KO-CAP Reliability Assessment method was developed as a result of over 10 years of research and is described in numerous papers available on www.kemet.com. Benefits • Approved for DLA Drawing 04051/04052 • B, C, and D failure rates available • 100% accelerated steady state aging • High frequency capacitance retention • Improved humidity capability 85°C/85% RH, 1.0 VR (in black color epoxy) available • Very low ESR values down to 5 mΩ • Surge current testing options • Volumetrically efficient • EIA standard case sizes • KEMET's KO-CAP Reliability Assessment method Built Into Tomorrow © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 1 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Applications Typical applications include decoupling , filtering and hold-up in defense and aerospace applications that require low ESR or a benign failure mode. When extreme temperatures and humidity are taken into account, polymer capacitors offer a number of advantages over other types of capacitors. KEMET continues to investigate the behavior of polymer capacitors in extreme conditions. If you have questions about using these capacitors in a specific environment or application, we suggest you contact your local KEMET representative or Field Application Engineer. You may also refer to “Considerations for Polymer Capacitors in Extreme Environments” located at www.kemet.com/ExtremePolymerPaper. Environmental Compliance RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Halogen Free. K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information T 541 D 157 M 10 Rated Capacitor Case Capacitance Capacitance Voltage Series Class Size Code (pF) Tolerance (VDC) A, First two digits K = ± 10% 2R5 = 2.5 T= 540 = Tantalum Polymer B, represent M = ±20% 003 = 3 COTS C, significant 004 = 4 541 = D, figures. Third 006 = 6.3 Polymer O, digit specifies 010 = 10 COTS X, number of 016 = 16 Multiple Y zeros. 020= 20 Anode 025 = 25 035 = 35 050 = 50 063 = 63 A H 65 10 Failure Rate/ Design Termination Finish Surge Option ESR A = N/A B* = 0.1%/KHrs C* = 0.01%/KHrs D*= 0.001%/KHrs H = Standard solder coated (SnPb 5% Pb minimum) T = 100% Matte Tin (Sn)-plated 65 = 4 cycles at 25°C ±5°C** 66 = 10 cycles at 25°C ±5°C*** 67 = 10 cycles at -55°C +0°C/-5°C and +85°C ±5°C*** 85 = 4 cycles at 25°C ±5°C ** and improved humidity capability 86 = 10 cycles at 25°C ±5°C*** and improved humidity capability 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** and improved humidity capability 05 = ESR High 10 = ESR Standard 20 = ESR Low 30* = ESR - Ultra Low ESR Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel 7610 = Bulk Bag 7640 = Bulk plastic box WAFL = Waffle Pack * Select part numbers, ** Before voltage aging, *** After voltage aging © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 2 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Ordering Information – DLA Drawing 04052- 002 A Drawing Number Dash Number Surge Current Option 04052 04051 See Part Number List Blank = 4 cycles +25°C ±5°C Before Voltage Aging A = 10 cycles +25°C ±5°C After Voltage Aging B = 10 cycles −55°C +0°C/−5°C and +85°C ±5°C After Voltage Aging Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range DF (120 Hz) ESR (100 kHz) Leakage Current −55°C to 125°C * 4.7 – 1,500 µF at 120 Hz/25°C K Tolerance (10%), M Tolerance (20%) 2.5 – 63 V ≤ 10% Refer to Part Number Electrical Specification Table ≤ 0.1 CV (µA) at rated voltage after 5 minutes * KEMET’s Polymer COTS (T540/T541 Series) capacitors are rated for operation between −55°C and +125°C. Parametric electrical performance remains within stated specification limits after 1,000 hours of continuous operation and/or storage at +125°C. Long-term duty cycles or storage at or above +125°C may result in an increase in ESR performance outside of the stated specification limits. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 3 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Qualification Test Condition Characteristics Δ C/C Endurance DF 105°C at rated voltage, 2,000 hours 125°C at 2/3 rated voltage, 2,000 hours DCL ** ESR Δ C/C Storage Life Humidity Temperature Stability DF 125°C at 0 volts, 2,000 hours Extreme temperature exposure at a succession of continuous steps at +25°C, −55°C, +25°C, +85°C, +125°C, +25°C Mechanical Shock/ Vibration Additional qualifcation testing per MIL-PRF-55365/8 1.25 x IL at 125°C 2 x IL (105°C); 5 x IL (125°C) Within −20/+10% of initial value Within initial limits Within 2.0 x initial limit ESR Within 5.0 x initial limit Within −5%/+35% of initial value DF ≤ initial limit Within 1.5 x IL *** DCL Within 3.0 x initial limit +25°C −55°C +85°C (1) +125°C (2) Δ C/C ±5% ±10% ±20% ±30% DF IL IL 1.2 x IL 1.5 x IL DCL IL N/A 10 x IL 10 x IL Δ C/C Surge Voltage ≤ initial limit DCL ** Δ C/C 60°C, 90% RH, 500 hours, rated voltage 60°C, 90% RH, 500 hours, no load 85°C, 85% RH, 1,000 hours, rated voltage *** Within −20/+10% of initial value 105°C, 1.32 x rated voltage, 33 Ω resistance, 1,000 cycles Mil-Std-202, Method 213, Condition I, 100 G peak Mil-Std-202, Method 204, Condition D, 10 Hz to 2,000 Hz, 20 G peak Within −20/+5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits Δ C/C Within ±10% of initial value DF Within initial limits DCL Within initial limits Please contact KEMET for more information *IL = Initial limit ** The test voltage shall be maintained during the cool down from elevated test temperature to +25°C. After cool down, the capacitors shall be discharged for a minimum of 5 minutes. DC leakage measurements are allowed at this time. (1) ≥16V - ∆C/C = ±30% (2) ≥16V - ∆C/C = ±40% *** For Part Number with surge options 85, 86, and 87 Certification DLA Drawing 04051 & 04052 © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 4 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 1,000 T541D227M010AHE010_IMP T541X337M010AHE010_IMP 10 T541X157M016AHE025_IMP Capacitance (µF) Impedance, ESR (Ohms) 100 T541D227M010AHE010_ESR 1 T541X337M010AHE010_ESR T541X157M016AHE025_ESR 0.1 100 10 T541D227M010AHE010_CAP T541X337M010AHE010_CAP T541X157M016AH025_CAP 0.01 0.001 100 1,000 1 100 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) Dimensions – Millimeters (Inches) Metric will govern CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B H X T S G S Case Size KEMET EIA Termination cutout at KEMET's option, either end L W H F±0.1 ±(0.004) S±0.3 B±0.15 ±(0.012) (Ref)±0.006 3.2 ±0.2 1.6 ±0.2 1.6 ±0.2 3216-18 (0.126 ±0.008) (0.063 ±0.008) (0.063 ±0.008) 1.2 (0.047) 0.8 (0.031) 0.4 (0.016) B 3.5 ±0.2 2.8 ±0.2 1.9 ±0.2 3528-21 (0.138 ±0.008) (0.110 ±0.008) (0.075 ±0.008) 2.2 (0.087) 0.8 (0.031) 0.4 (0.016) C 6.0 ±0.3 3.2 ±0.3 2.5 ±0.3 6032-28 (0.236 ±0.012) (0.126 ±0.012) (0.098 ±0.012) 2.2 (0.087) 1.3 (0.051) 0.5 (0.020) D 7.3 ±0.3 4.3 ±0.3 2.8 ±0.3 7343-31 (0.287 ±0.012) (0.169 ±0.012) (0.110 ±0.012) 7.3 ±0.3 6.0 ±0.3 4.0 ±0.3 7360-43 (0.287 ±0.012) (0.236 ±0.012) (0.157 ±0.012) 7.3 ±0.3 4.3 ±0.3 4.0 ±0.3 7343-43 (0.287 ±0.012) (0.169 ±0.012) (0.157 ±0.012) 2.4 (0.095) 4.1 (0.161) 2.4 (0.095) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 0.5 (0.020) 7.3 ±0.3 4.3 ±0.3 3.8 ±0.2 7343-40 (0.287 ±0.012) (0.169 ±0.012) (0.150 ±0.008) 2.4 (0.095) 1.3 (0.051) 0.5 (0.020) X Y R L Typical Weight Component Dimensions A O F E P N/A 0.5 (0.020) X (Ref) P (Ref) R (Ref) T (Ref) A (Minimum) 0.13 0.10 ±0.10 0.4 0.4 (0.004 ±0.004) (0.016) (0.016) (0.005) 0.13 0.10 ±0.10 0.5 1.0 (0.004 ±0.004) (0.020) (0.039) (0.005) 0.13 0.10 ±0.10 0.9 1.0 (0.004 ±0.004) (0.035) (0.039) (0.005) 0.13 0.10 ±0.10 0.9 1.0 (0.004 ±0.004) (0.035) (0.039) (0.005) 0.10 ±0.10 0.13 N/A N/A (0.004 ±0.004) (0.005) 0.13 0.10 ±0.10 1.7 1.0 (0.004 ±0.004) (0.067) (0.039) (0.005) 0.13 0.10 ±0.10 1.7 1.0 (0.004 ±0.004) (0.067) (0.039) (0.005) G (Ref) E (Ref) (mg) 1.2 (0.047) 1.1 1.3 (0.043) (0.051) 53.17 1.9 (0.075) 1.8 2.2 (0.071) (0.087) 98.30 3.1 (0.122) 2.8 2.4 (0.110) (0.095) 193.46 3.8 (0.150) 307.51 696.00 3.8 (0.150) 3.5 3.5 (0.138) (0.138) 3.5 3.5 (0.138) (0.138) 3.5 3.5 (0.138) (0.138) 3.8 (0.150) 3.5 3.5 (0.138) (0.138) 378.06 3.8 (0.150) 410.89 Notes: (Ref) – Dimensions provided for reference only. These weights are provided as reference. If exact weights are needed, please contact your KEMET Sales Representative © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 5 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Improved DC Number Humidity Leakage 04051/04052 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3 3 3 3 3 3 3 3 3 3 3 330 330 330 470 470 470 470 470 470 470 680 680 680 680 680 680 680 680 680 680 680 680 680 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,500 1,500 1,500 1,500 1,500 1,500 1,500 100 100 100 150 150 150 330 330 330 470 470 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T540D337M2R5AH(1)10 T540D337(5)2R5(3)(6)(1)10 T540D337(5)2R5(3)H(7)05 T540D477M2R5AH(1)10 T540D477(5)2R5(3)(6)(1)10 T540D477(5)2R5(3)H(7)05 T541D477M2R5AH(1)20 T541D477(5)2R5(3)(6)(1)20 T541D477M2R5AH(1)10 T541D477(5)2R5(3)(6)(1)10 T540D687M2R5AH(1)10 T540D687(5)2R5(3)(6)(1)10 T540D687(5)2R5(3)H(7)05 T541D687M2R5AH(1)20 T541D687(5)2R5(3)(6)(1)20 T541D687M2R5AH(1)10 T541D687(5)2R5(3)(6)(1)10 T541Y687M2R5AH(1)30 T541Y687(5)2R5(3)(6)(1)30 T541Y687M2R5AH(1)20 T541Y687(5)2R5(3)(6)(1)20 T541Y687M2R5AH(1)10 T541Y687(5)2R5(3)(6)(1)10 T541X108M2R5AH(1)30 T541X108(5)2R5(3)(6)(1)30 T541X108M2R5AH(1)20 T541X108(5)2R5(3)(6)(1)20 T541X108M2R5AH(1)10 T541X108(5)2R5(3)(6)(1)10 T541X108(5)2R5(3)(6)(7)05 T541X158M2R5AH(1)30 T541X158(5)2R5(3)(6)(1)30 T541X158M2R5AH(1)20 T541X158(5)2R5(3)(6)(1)20 T541X158M2R5AH(1)10 T541X158(5)2R5(3)(6)(1)10 T541X158(5)2R5(3)(6)(7)05 T540B107M003AH(1)10 T540B107(5)003(3)(6)(1)10 T540B107(5)003(3)H(7)10 T540B157M003AH(1)10 T540B157(5)003(3)(6)(1)10 T540B157(5)003(3)H(7)10 T540D337M003AH(1)10 T540D337(5)003(3)(6)(1)10 T540D337(5)003(3)H(7)05 T540D477M003AH(1)10 T540D477(5)003(3)(6)(1)10 04051-002(2) N/A N/A 04051-003(2) N/A N/A 04052-002(2) N/A 04052-003(2) N/A 04051-004(2) N/A N/A 04052-007(2) N/A 04052-008(2) N/A 04052-005(2) N/A 04052-006(2) N/A 04052-042(2) N/A 04052-009(2) N/A 04052-010(2) N/A 04052-043(2) N/A N/A 04052-011(2) N/A 04052-044(2) N/A 04052-045(2) N/A N/A 04051-005(2) N/A N/A 04051-006(2) N/A N/A 04051-007(2) N/A N/A 04051-008(2) N/A VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Number 04051/04052 Improved Humidity DC Leakage (85°C/85%) Capable • • • • • • • • µA at 25°C Maximum 83 83 83 118 118 118 118 118 118 118 170 170 170 170 170 170 170 170 170 170 170 170 170 250 250 250 250 250 250 250 375 375 375 375 375 375 375 30 30 30 45 45 45 99 99 99 141 141 DF ESR % at 25°C mΩ at 25°C 120 Hz 100 kHz Maximum Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 10 10 10 10 10 25 25 40 25 25 40 6 6 10 10 25 25 40 6 6 10 10 5 5 6 6 10 10 5 5 6 6 10 10 12 5 5 6 6 10 10 12 80 80 80 80 80 80 25 25 40 25 25 % at 25°C mΩ at 25°C 100 kHz 120 Hz Maximum Maximum DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. (rms) mA at 45°C 100 kHz °C 3,000 3,000 2,372 3,000 3,000 2,372 6,519 6,519 5,050 5,050 3,000 3,000 2,372 6,519 6,519 5,050 5,050 7,253 7,253 6,621 6,621 5,128 5,128 7,348 7,348 6,708 6,708 5,196 5,196 4,743 7,348 7,348 6,708 6,708 5,196 5,196 4,743 1,260 1,260 1,260 1,260 1,260 1,260 3,000 3,000 2,372 3,000 3,000 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (rms) mA at 45°C 100 kHz °C Maximum Allowable Ripple Current Maximum Operating Temp. (1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option. (2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging. (3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level. (4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level. (5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish. (7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability, 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 6 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Improved DC Number Humidity Leakage 04051/04052 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 470 470 470 680 680 680 680 680 1,000 1,000 1,000 1,500 1,500 1,500 2,000 68 68 68 100 100 100 220 220 220 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 470 470 680 680 680 680 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T540D477(5)003(3)H(7)05 T541D477M003AH(1)10 T541D477(5)003(3)(6)(1)10 T540D687M003AH(1)10 T540D687(5)003(3)(6)(1)10 T540D687(5)003(3)H(7)05 T541D687M003AH(1)10 T541D687(5)003(3)(6)(1)10 T541X108M003AH(1)10 T541X108(5)003(3)(6)(1)10 T541X108(5)003(3)(6)(7)05 T541X158M003AH(1)10 T541X158(5)003(3)(6)(1)10 T541X158(5)003(3)(6)(7)05 T541O208M003(3)(6)(1)10 T540B686M004AH(1)10 T540B686(5)004(3)(6)(1)10 T540B686(5)004(3)H(7)10 T540B107M004AH(1)10 T540B107(5)004(3)(6)(1)10 T540B107(5)004(3)H(7)10 T540D227M004AH(1)10 T540D227(5)004(3)(6)(1)10 T540D227(5)004(3)H(7)05 T540D337M004AH(1)10 T540D337(5)004(3)(6)(1)10 T540D337(5)004(3)H(7)05 T541D337M004AH(1)20 T541D337(5)004(3)(6)(1)20 T541D337M004AH(1)10 T541D337(5)004(3)(6)(1)10 T540D477M004AH(1)20 T540D477(5)004(3)(6)(1)20 T540D477M004AH(1)10 T540D477(5)004(3)(6)(1)10 T540D477(5)004(3)H(7)10 T541D477M004AH(1)10 T541D477(5)004(3)(6)(1)10 T541Y477M004AH(1)30 T541Y477(5)004(3)(6)(1)30 T541Y477M004AH(1)20 T541Y477(5)004(3)(6)(1)20 T541Y477M004AH(1)10 T541Y477(5)004(3)(6)(1)10 T541X687M004AH(1)30 T541X687(5)004(3)(6)(1)30 T541X687M004AH(1)20 T541X687(5)004(3)(6)(1)20 N/A 04052-012(2) N/A 04051-009(2) N/A N/A 04052-013(2) N/A 04052-014(2) N/A N/A 04052-015(2) N/A N/A N/A 04051-011(2) N/A N/A 04051-012(2) N/A N/A 04051-013(2) N/A N/A 04051-014(2) N/A N/A 04052-017(2) N/A 04052-046(2) N/A 04051-015(2) N/A 04051-016(2) N/A N/A 04052-018(2) N/A 04052-019(2) N/A 04052-020(2) N/A 04052-047(2) N/A 04052-021(2) N/A 04052-022(2) N/A • 141 141 141 204 204 204 204 204 300 300 300 450 450 450 600 28 28 28 40 40 40 88 88 88 132 132 132 132 132 132 132 188 188 188 188 188 188 188 188 188 188 188 188 188 272 272 272 272 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Number 04051/04052 Improved Humidity DC Leakage • • • • • • • • DF ESR % at 25°C mΩ at 25°C 120 Hz 100 kHz Maximum Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 40 10 10 25 25 40 10 10 10 10 12 8 8 12 10 80 80 80 80 80 80 25 25 40 25 25 40 6 6 10 10 25 25 40 40 40 10 10 5 5 6 6 10 10 5 5 6 6 % at 25°C mΩ at 25°C 100 kHz 120 Hz Maximum Maximum DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. (rms) mA at 45°C 100 kHz °C 2,372 5,050 5,050 3,000 3,000 2,372 5,050 5,050 5,196 5,196 4,743 5,809 5,809 4,743 5,480 1,260 1,260 1,260 1,260 1,260 1,260 3,000 3,000 2,372 3,000 3,000 2,372 6,519 6,519 5,050 5,050 3,000 3,000 2,372 2,372 2,372 5,050 5,050 7,253 7,253 6,621 6,621 5,128 5,128 7,348 7,348 6,708 6,708 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (rms) mA at 45°C 100 kHz °C Maximum Allowable Ripple Current Maximum Operating Temp. (1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option. (2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging. (3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level. (4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level. (5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish. (7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability, 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 7 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Improved DC Number Humidity Leakage 04051/04052 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 680 680 680 1,000 1,000 1,000 1,000 1,000 1,500 33 33 33 47 47 47 68 68 68 150 150 150 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 T541X687M004AH(1)10 T541X687(5)004(3)(6)(1)10 T541X687(5)004(3)(6)(7)05 T541X108M004AH(1)20 T541X108(5)004(3)(6)(1)20 T541X108M004AH(1)10 T541X108(5)004(3)(6)(1)10 T541X108(5)004(3)(6)(7)05 T541O158M004(3)(6)(1)10 T540B336M006AH(1)10 T540B336(5)006(3)(6)(1)10 T540B336(5)006(3)H(7)10 T540B476M006AH(1)10 T540B476(5)006(3)(6)(1)10 T540B476(5)006(3)H(7)10 T540B686M006AH(1)10 T540B686(5)006(3)(6)(1)10 T540B686(5)006(3)H(7)10 T540D157M006AH(1)10 T540D157(5)006(3)(6)(1)10 T540D157(5)006(3)H(7)05 T540D227M006AH(1)10 T540D227(5)006(3)(6)(1)10 T540D227(5)006(3)H(7)05 T541D227M006AH(1)20 T541D227(5)006(3)(6)(1)20 T541D227M006AH(1)10 T541D227(5)006(3)(6)(1)10 T540D337M006AH(1)20 T540D337(5)006(3)(6)(1)20 T540D337M006AH(1)10 T540D337(5)006(3)(6)(1)10 T540D337(5)006(3)H(7)10 T541D337M006AH(1)10 T541D337(5)006(3)(6)(1)10 T541Y337M006AH(1)30 T541Y337(5)006(3)(6)(1)30 T541Y337M006AH(1)20 T541Y337(5)006(3)(6)(1)20 T541Y337M006AH(1)10 T541Y337(5)006(3)(6)(1)10 T541X477M006AH(1)30 T541X477(5)006(3)(6)(1)30 T541X477M006AH(1)20 T541X477(5)006(3)(6)(1)20 T541X477M006AH(1)10 T541X477(5)006(3)(6)(1)10 T541X477(5)006(3)(6)(7)05 04052-023(2) N/A N/A 04052-024(2) N/A 04052-048(2) N/A N/A N/A 04051-017(2) N/A N/A 04051-019(2) N/A N/A 04051-020(2) N/A N/A 04051-021(2) N/A N/A 04051-022(2) N/A N/A 04052-026(2) N/A 04052-049(2) N/A 04051-023(2) N/A 04051-024(2) N/A N/A 04052-027(2) N/A 04052-028(2) N/A 04052-029(2) N/A 04052-030(2) N/A 04052-031(2) N/A 04052-032(2) N/A 04052-033(2) N/A N/A VDC at 105°C µF KEMET/EIA (See below for part options) Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number (85°C/85%) Capable µA at 25°C Maximum • 272 272 272 400 400 400 400 400 600 21 21 21 30 30 30 43 43 43 95 95 95 139 139 139 139 139 139 139 208 208 208 208 208 208 208 208 208 208 208 208 208 296 296 296 296 296 296 296 Part Number (85°C/85%) Capable µA at 25°C Maximum DLA Drawing Number 04051/04052 Improved Humidity DC Leakage • • • • • • • • DF ESR % at 25°C mΩ at 25°C 120 Hz 100 kHz Maximum Maximum 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 12 6 6 10 10 12 10 80 80 80 80 80 80 80 80 80 25 25 40 25 25 40 6 6 10 10 25 25 40 40 40 10 10 5 5 6 6 10 10 5 5 6 6 10 10 12 % at 25°C mΩ at 25°C 100 kHz 120 Hz Maximum Maximum DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. (rms) mA at 45°C 100 kHz °C 5,196 5,196 4,743 6,708 6,708 5,196 5,196 4,743 5,480 1,260 1,260 1,260 1,260 1,260 1,260 1,260 1,260 1,260 3,000 3,000 2,372 3,000 3,000 2,372 6,519 6,519 5,050 5,050 3,000 3,000 2,372 2,372 2,372 5,050 5,050 7,253 7,253 6,621 6,621 5,128 5,128 7,348 7,348 6,708 6,708 5,196 5,196 4,743 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (rms) mA at 45°C 100 kHz °C Maximum Allowable Ripple Current Maximum Operating Temp. (1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option. (2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging. (3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level. (4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level. (5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish. (7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability, 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 8 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Improved DC Number Humidity Leakage 04051/04052 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 680 680 1,000 22 22 22 22 33 33 33 47 47 100 100 100 100 100 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 470 470 680 47 X/7343-43 X/7343-43 O/7360-43 A/3216-18 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 Y/7343-40 Y/7343-40 Y/7343-40 Y/7343-40 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 D/7343-31 T541X687(5)006(3)(6)(1)10 T541X687(5)006A(6)(7)10 T541O108M006(3)(6)(1)10 T540A226M010(4)(6)(1)10 T540B226M010AH(1)10 T540B226(5)010(3)(6)(1)10 T540B226(5)010(3)(6)(7)10 T540B336M010AH(1)10 T540B336(5)010(3)(6)(1)10 T540B336(5)010(3)(6)(7)10 T540B476M010(4)(6)(1)20 T540B476M010(4)(6)(1)10 T540D107M010AH(1)20 T540D107(5)010(3)(6)(1)20 T540D107M010AH(1)10 T540D107(5)010(3)(6)(1)10 T540D107(5)010(3)(6)(7)10 T540D157M010AH(1)20 T540D157(5)010(3)(6)(1)20 T540D157M010AH(1)10 T540D157(5)010(3)(6)(1)10 T540D157(5)010(3)(6)(7)10 T541D157M010AH(1)20 T541D157(5)010(3)(6)(1)20 T541D157M010AH(1)10 T541D157(5)010(3)(6)(1)10 T540D227M010AH(1)10 T540D227(5)010(3)(6)(1)10 T540D227(5)010(3)(6)(7)05 T541D227M010AH(1)20 T541D227(5)010(3)(6)(1)20 T541D227M010AH(1)10 T541D227(5)010(3)(6)(1)10 T541Y227M010AH(1)20 T541Y227(5)010(3)(6)(1)20 T541Y227M010AH(1)10 T541Y227(5)010(3)(6)(1)10 T541X337M010AH(1)30 T541X337(5)010(4)(6)(1)30 T541X337M010AH(1)20 T541X337(5)010(4)(6)(1)20 T541X337M010AH(1)10 T541X337(5)010(3)(6)(1)10 T541X337(5)010(4)(6)(7)05 T541X477(5)010(3)(6)(1)10 T541X477(5)010(3)(6)(7)10 T541O687M010(3)(6)(1)10 T540D476M016AH(1)20 N/A N/A N/A N/A 04051-025(2) N/A N/A 04051-027(2) N/A N/A N/A N/A 04051-028(2) N/A 04051-029(2) N/A N/A 04051-030(2) N/A 04051-031(2) N/A N/A 04052-035(2) N/A 04052-050(2) N/A 04051-032(2) N/A N/A 04052-036(2) N/A 04052-037(2) N/A 04052-038(2) N/A 04052-051(2) N/A 04052-039(2) N/A 04052-040(2) N/A 04052-041(2) N/A N/A N/A N/A N/A 04051-033(2) VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Number 04051/04052 Improved Humidity DC Leakage (85°C/85%) Capable • • • • • • • • µA at 25°C Maximum 428 428 630 22 22 22 22 33 33 33 47 47 100 100 100 100 100 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 470 470 680 76 DF ESR % at 25°C mΩ at 25°C 120 Hz 100 kHz Maximum Maximum 10 10 10 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 15 15 12 80 80 80 80 80 80 80 35 100 25 25 55 55 55 25 25 55 55 55 6 6 10 10 25 25 35 6 6 10 10 6 6 10 10 5 5 6 6 10 10 15 20 20 15 35 % at 25°C mΩ at 25°C 100 kHz 120 Hz Maximum Maximum DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. (rms) mA at 45°C 100 kHz °C 4,243 4,243 5,000 1,183 1,260 1,260 1,260 1,260 1,260 1,260 1,905 1,127 3,000 3,000 2,023 2,023 2,023 3,000 3,000 2,023 2,023 2,023 6,519 6,519 5,050 5,050 3,000 3,000 3,000 6,519 6,519 5,050 5,050 6,621 6,621 5,128 5,128 7,348 7,348 6,708 6,708 5,196 5,196 4,243 3,674 3,674 4,470 2,535 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (rms) mA at 45°C 100 kHz °C Maximum Allowable Ripple Current Maximum Operating Temp. (1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option. (2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging. (3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level. (4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level. (5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish. (7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability, 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 9 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Improved DC Number Humidity Leakage 04051/04052 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 20 20 20 20 20 20 20 20 20 20 20 20 20 20 25 25 25 25 25 25 47 47 47 47 68 68 68 100 100 100 150 150 150 150 150 220 220 220 220 220 330 330 330 330 330 330 470 470 22 22 22 33 33 33 47 47 47 100 100 100 100 100 6.8 10 15 15 15 15 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 O/7360-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T540D476(5)016(3)(6)(1)20 T540D476M016AH(1)10 T540D476(5)016(3)(6)(1)10 T540D476(5)016(3)(6)(7)10 T540D686M016AH(1)10 T540D686(5)016(3)(6)(1)10 T540D686(5)016(3)(6)(7)10 T540D107M016AH(1)10 T540D107(5)016(3)(6)(1)10 T540D107(5)016(3)(6)(7)05 T541X157M016AH(1)20 T541X157(5)016(3)(6)(1)20 T541X157M016AH(1)10 T541X157(5)016(3)(6)(1)10 T541X157(5)016(3)(6)(7)10 T541X227M016AH(1)20 T541X227(5)016(3)(6)(1)20 T541X227M016AH(1)10 T541X227(5)016(3)(6)(1)10 T541X227(5)016(3)(6)(7)10 T541X337M016AH(1)20 T541X337(5)016(3)(6)(1)20 T541X337(5)016(3)(6)(7)20 T541X337M016AH(1)10 T541X337(5)016(3)(6)(1)10 T541X337(5)016(3)(6)(7)10 T541O477M016(3)(6)(1)20 T541O477M016(3)(6)(1)10 T540D226M020AH(1)10 T540D226(5)020(3)(6)(1)10 T540D226(5)020(3)(6)(7)05 T540D336M020AH(1)10 T540D336(5)020(3)(6)(1)10 T540D336(5)020(3)(6)(7)05 T540D476M020AH(1)10 T540D476(5)020(3)(6)(1)10 T540D476(5)020(3)(6)(7)05 T541X107M020AH(1)10 T541X107(5)020A(6)(1)20 T541X107(5)020A(6)(7)20 T541X107(5)020(3)(6)(1)10 T541X107(5)020(3)(6)(7)10 T540C685(5)025(3)(6)(1)10 T540C106(5)025(3)(6)(1)10 T540D156M025AH(1)20 T540D156(5)025(3)(6)(1)20 T540D156M025AH(1)10 T540D156(5)025(3)(6)(1)10 N/A 04051-034(2) N/A N/A 04051-035(2) N/A N/A 04051-036(2) N/A N/A 04052-052(2) N/A 04052-053(2) N/A N/A 04052-054(2) N/A 04052-055(2) N/A N/A 04052-056(2) N/A N/A 04052-057(2) N/A N/A N/A N/A 04051-037(2) N/A N/A 04051-038(2) N/A N/A 04051-039(2) N/A N/A 04052-058(2) N/A N/A N/A N/A N/A N/A 04051-040(2) N/A 04051-041(2) N/A VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Number 04051/04052 Improved Humidity DC Leakage (85°C/85%) Capable • • • • • • • • • • • • µA at 25°C Maximum 76 76 76 76 109 109 109 160 160 160 240 240 240 240 240 352 352 352 352 352 528 528 528 528 528 528 752 752 44 44 44 66 66 66 94 94 94 200 200 200 200 200 17 25 38 38 38 38 DF ESR % at 25°C mΩ at 25°C 120 Hz 100 kHz Maximum Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 35 65 65 65 75 75 75 50 50 75 25 25 40 40 40 25 25 40 40 40 25 25 25 50 50 50 20 40 75 75 100 75 75 100 75 75 100 50 30 30 50 50 150 150 75 75 100 100 % at 25°C mΩ at 25°C 100 kHz 120 Hz Maximum Maximum DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. (rms) mA at 45°C 100 kHz °C 2,535 1,861 1,861 1,861 1,732 1,732 1,732 2,121 2,121 2,121 3,286 3,286 2,598 2,598 2,598 3,286 3,286 2,598 2,598 2,598 3,286 3,286 3,286 2,324 2,324 2,324 3,870 2,740 1,732 1,732 1,500 1,732 1,732 1,500 1,732 1,732 1,500 2,324 2,870 2,870 2,324 2,324 1,049 1,049 1,732 1,732 1,500 1,500 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (rms) mA at 45°C 100 kHz °C Maximum Allowable Ripple Current Maximum Operating Temp. (1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option. (2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging. (3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level. (4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level. (5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish. (7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability, 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 10 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Improved DC Number Humidity Leakage 04051/04052 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 15 22 22 22 33 33 33 68 68 68 100 100 100 100 150 22 22 33 33 47 47 68 68 68 68 100 100 100 100 150 150 15 15 15 15 15 33 33 33 47 47 47 68 10 10 10 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 O/7360-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 D/7343-31 D/7343-31 D/7343-31 T540D156(5)025(3)(6)(7)10 T540D226M025AH(1)10 T540D226(5)025(3)(6)(1)10 T540D226(5)025(3)(6)(7)05 T540D336M025AH(1)10 T540D336(5)025(3)(6)(1)10 T540D336(5)025(3)(6)(7)05 T541X686M025AH(1)10 T541X686(5)025(3)(6)(1)10 T541X686(5)025(3)(6)(7)10 T541X107M025AH(1)10 T541X107(5)025(3)(6)(1)10 T541X107(5)025(3)(6)(7)10 T541X107(5)025(3)(6)(1)20 T541O157M025(3)(6)(1)10 T540D226(5)030(4)(6)(1)10 T540D226(5)030(4)(6)(7)05 T540D336(5)030(4)(6)(1)10 T540D336(5)030(4)(6)(7)10 T541X476(5)030(4)(6)(1)10 T541X476(5)030(4)(6)(7)10 T541X686(5)030(4)(6)(1)10 T541X686(5)030(4)(6)(7)10 T541X686(5)030(4)(6)(1)20 T541X686(5)030(4)(6)(7)20 T541X107(5)030(4)(6)(1)10 T541X107(5)030(4)(6)(7)10 T541X107(5)030(4)(6)(1)20 T541X107(5)030(4)(6)(7)20 T541O157M030(4)(6)(1)20 T541O157M030(4)(6)(1)10 T540D156M035AH(1)20 T540D156(5)035(4)(6)(1)20 T540D156M035AH(1)10 T540D156(5)035(4)(6)(1)10 T540D156(5)035(4)(6)(7)10 T541X336M035AH(1)10 T541X336(5)035(4)(6)(1)10 T541X336(5)035(4)(6)(7)10 T541X476M035AH(1)10 T541X476(5)035(4)(6)(1)10 T541X476(5)035(4)(6)(7)10 T541O686M035(4)(6)(1)10 T540D106M050AH(1)20 T540D106(5)050(4)(6)(1)20 T540D106M050AH(1)10 N/A 04051-042(2) N/A N/A 04051-043(2) N/A N/A 04052-059(2) N/A N/A 04052-060(2) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 04051-044(2) N/A 04051-045(2) N/A N/A 04052-061(2) N/A N/A 04052-062(2) N/A N/A N/A 04051-046(2) N/A 04051-047(2) • 38 55 55 55 83 83 83 170 170 170 250 250 250 250 375 66 66 99 99 141 141 204 204 204 204 300 300 300 300 450 450 53 53 53 53 53 116 116 116 165 165 165 238 50 50 50 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Number 04051/04052 Improved Humidity DC Leakage • • • • • • • • • • • • • • • DF ESR % at 25°C mΩ at 25°C 120 Hz 100 kHz Maximum Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 100 75 75 100 75 75 100 50 50 50 60 60 60 35 45 75 100 100 100 50 50 50 50 35 35 70 70 35 35 30 55 75 75 100 100 100 60 60 60 60 60 60 45 100 100 125 % at 25°C mΩ at 25°C 100 kHz 120 Hz Maximum Maximum DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. (rms) mA at 45°C 100 kHz °C 1,500 1,732 1,732 1,500 1,732 1,732 1,500 2,324 2,324 2,324 2,121 2,121 2,121 2,777 2,580 1,732 1,500 1,500 1,500 2,324 2,324 2,324 2,324 2,777 2,777 1,878 1,878 2,777 2,777 3,160 2,340 1,732 1,732 1,500 1,500 1,500 2,121 2,121 2,121 2,121 2,121 2,121 2,580 1,500 1,500 1,342 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (rms) mA at 45°C 100 kHz °C Maximum Allowable Ripple Current Maximum Operating Temp. (1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option. (2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging. (3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level. (4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level. (5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish. (7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability, 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 11 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 1 – Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Improved DC Number Humidity Leakage 04051/04052 VDC at 105°C µF KEMET/EIA (See below for part options) Part Number 50 50 50 50 50 50 50 63 63 63 63 63 63 63 63 63 63 63 63 63 63 10 10 22 22 33 33 47 4.7 4.7 4.7 4.7 4.7 10 10 10 10 10 10 15 15 22 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 X/7343-43 O/7360-43 T540D106(5)050(4)(6)(1)10 T540D106(5)050(4)(6)(7)10 T541X226M050AH(1)10 T541X226(5)050(4)(6)(1)10 T541X336M050AH(1)10 T541X336(5)050(4)(6)(1)10 T541O476M050(4)(6)(1)10 T540D475M063AH(1)20 T540D475(5)063(4)(6)(1)20 T540D475M063AH(1)10 T540D475(5)063(4)(6)(1)10 T540D475(5)063(4)(6)(7)10 T541X106M063AH(1)10 T541X106(5)063(4)(6)(1)10 T541X106M063AH(1)20 T541X106(5)063(4)(6)(1)20 T541X106M063AH(1)30 T541X106(5)063(4)(6)(1)30 T541X156M063AH(1)10 T541X156(5)063(4)(6)(1)10 T541O226M063(4)(6)(1)10 N/A N/A 04052-063(2) N/A 04052-064(2) N/A N/A 04051-048(2) N/A 04051-049(2) N/A N/A 04052-067(2) N/A 04052-066(2) N/A 04052-065(2) N/A 04052-068(2) N/A N/A VDC at 105°C µF KEMET/EIA (See below for part options) Part Number (85°C/85%) Capable µA at 25°C Maximum Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DLA Drawing Number 04051/04052 Improved Humidity DC Leakage (85°C/85%) Capable • • µA at 25°C Maximum 50 50 110 110 165 165 235 30 30 30 30 30 63 63 63 63 63 63 95 95 139 DF ESR % at 25°C mΩ at 25°C 120 Hz 100 kHz Maximum Maximum 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 125 125 75 75 75 75 60 100 100 120 120 120 150 150 100 100 75 75 50 50 40 % at 25°C mΩ at 25°C 100 kHz 120 Hz Maximum Maximum DF ESR Maximum Allowable Ripple Current Maximum Operating Temp. (rms) mA at 45°C 100 kHz °C 1,342 1,342 1,897 1,897 1,897 1,897 2,240 1,500 1,500 1,369 1,369 1,369 1,342 1,342 1,643 1,643 1,897 1,897 2,324 2,324 2,740 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 (rms) mA at 45°C 100 kHz °C Maximum Allowable Ripple Current Maximum Operating Temp. (1) To complete KEMET part number, insert 65 = 4 cycles +25°C, 66 = 10 cycles +25°C, 67 = 10 cycles −55°C and +85°C, Designates surge current option. (2) To complete DLA part number, insert Blank = None, A = 10 cycles +25°C ±5°C After Voltage Aging, B = 10 cycles −55°C and +85°C ±5°C After Voltage Aging. (3) To complete KEMET part number for non-DLA, insert A = N/A ,insert B = 0.1%/1,000 hours, C = 0.01%/1,000 hours, D=0.001%/1,000 hours. Designates Reliability Level. (4) To complete KEMET part number for non-DLA, insert A = N/A, insert B = 0.1%/1,000 hours or C = 0.01%/1,000 hours. Designates Reliability Level. (5) To complete KEMET part number, insert M for ±20% or K for ±10%. Designates capacitance tolerance. (6) To complete KEMET part number insert, H = Solder Plated, T = 100% Tin (Sn). Designates termination finish. (7) To complete KEMET part number, insert 85 = 4 cycles at 25°C ±5°C ** + improved humidity capability, 86 = 10 cycles at 25°C ±5°C*** + improved humidity capability, 87= 10 cycles at −55°C +0°C/−5°C and +85°C ±5°C*** + improved humidity capability. Designates surge current option on improved humidity capability. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 12 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Derating Guidelines 100% 95% Rated Voltage % Rated Voltage 90% 85% Recommended Application Voltage VR ≤ 10 V 80% 75% Recommended Application Voltage VR > 10 V 70% 65% 60% 55% 50% −55 25 45 85 105 125 Temperature (°C) Recommended Application Voltage KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according the graphic above, for the maximum steady state voltage. Maximum Recommended Steady State Voltage Maximum Recommended Steady State Voltage −55°C to 105°C 105°C to 125°C 2 V ≤ VR ≤ 10 V 90% of VR 60% of VR ,See Chart 12.5 V ≤ VR ≤ 63 V 80% of VR 54% of VR ,See Chart Voltage Rating VR = Rated Voltage © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 13 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: a. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. b. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Case Code EIA Case Code Maximum Power Dissipation (Pmax) mWatts at 45°C with +30°C Rise A B C D O X Y 3216-18 3528-20 6032-28 7343-31 7360-43 7443-43 7343-40 112 127 165 255 300 270 263 Temperature Compensation Multipliers for Maximum Ripple Current T ≤ 45°C 1.00 45° C < T ≤ 85°C 0.70 85°C < T ≤ 125°C 0.25 T= Environmental Temperature Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √Pmax/R E(max) = Z √Pmax/R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 14 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Surge Voltage Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be applied for periodic charging and discharging in the course of normal operation and cannot be part of the application voltage. Surge voltage capability is demonstrated by application of 1,000cycles at relevant voltage at 105°C and 125°C. The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle. Rated Voltage (V) Surge Voltage (V) Category Voltage (V) –55°C to 105°C Category Surge Voltage (V) up to 125°C 2.5 6.3 10 3.3 8.2 13.0 1.7 4.2 6.7 2.2 5.5 8.7 16 20 25 35 50 20.8 26.0 32.5 45.5 65.0 10.7 13.4 16.8 23.5 33.5 13.9 17.4 21.8 30.5 43.6 Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25°C 55°C 85°C 105°C 125°C* 15% of Rated Voltage 10% of Rated Voltage 5% of Rated Voltage 3% of Rated Voltage 1% of Rated Voltage *For series rated to 125°C © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 15 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 A 3216–18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 B 3528–21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 C 6032–25 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 D 7343–31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 O 7360-43 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 X¹ 7343–43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Y¹ 7343–40 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC–7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W W V2 S Grid Placement Courtyard © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 16 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Soldering Process Please note that although the X/7343–43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. “Wiping” the edges of a chip and heating the top surface is not recommended. During typical reflow operations, a slight darkening of the gold-colored epoxy may be observed. This slight darkening is normal and not harmful to the product. Marking permanency is not affected by this change. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100°C 150°C Temperature Maximum (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60 – 120 seconds 60 – 120 seconds Ramp-up Rate (TL to TP) 3°C/seconds maximum 3°C/seconds maximum Liquidous Temperature (TL) 183°C 217°C Time Above Liquidous (tL) 60 – 150 seconds 220°C* 235°C** 60 – 150 seconds 250°C* 260°C** Peak Temperature (TP) Time within 5°C of Maximum 20 seconds maximum 30 seconds maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) 6°C/seconds maximum 6°C/seconds maximum Time 25°C to Peak 6 minutes maximum 8 minutes maximum Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height ≤ 2.5 mm TP TL Temperature KEMET’s families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J–STD–020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp-up Rate = 3°C/second Maximum Ramp-down Rate = 6°C/second tL Tsmax Tsmin 25 ts 25°C to Peak Time Storage All KO-Cap Series are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as MSL3 (Moisture Sensitivity Level 3) per IPC/JEDEC J-STD-020 and packaged per IPC/JEDEC J-STD-033. MSL3 specifies a floor time of 168H at 30°C maximum temperature and 60% relative humidity Unused capacitors should be sealed in a MBB with fresh desiccant. Calculated shelf life in sealed bag: – 12 months from bag seal date in a storage environment of < 40°C and humidity < 90% RH – 24 months from bag seal date in a storage environment of < 30°C and humidity < 70% RH  If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 17 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Construction T540 Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Wire Leadframe (- Cathode) Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Polymer (Second Layer) Leadframe (+ Anode) Molded Epoxy Case Ta2O5 Dielectric (First Layer) Tantalum T541 - Multiple Anodes Polymer Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Wire Leadframe (− Cathode) Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Molded Epoxy Case Leadframe (+ Anode) © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum T2077_T540-541 • 9/24/2020 18 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Capacitor Marking T540 T541 KEMET Polymer KEMET Polymer Polarity Indicator (+) Polarity Indicator (+) Picofarad Code Picofarad Code KEMET ID Rated Voltage KEMET ID Rated Voltage Date Code* Date Code* * 903 = 3rd week of 2019 * 903 = 3rd week of 2019 Note: On parts with selected surge codes (8X) the epoxy is black. Date Code * 1 digit = Last number of Year 4 = 2014 5 = 2015 6 = 2016 7 = 2017 8 = 2018 9 = 2019 2nd and 3rd digit = Week of the Year 01 = 1st week of the Year to 52 = 52nd week of the Year st © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 19 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Tape & Reel Packaging Information KEMET’s molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (−) Embossment Top tape thickness 0.10 mm (0.004”) maximum thickness 180 mm (7.0”) or 330 mm (13.”) 8 mm (0.315”) or 12 mm (0.472”) Table 3 – Packaging Quantity Case Code KEMET P R I S A T M B U L C Q W Z V D Y X J H O EIA 2012-10 2012-12 3216-10 3216-12 3216-18 3528-12 3528-15 3528-21 6032-15 6032-19 6032-28 7343-12 7343-15 7343-17 7343-19 7343-31 7343-40 7343-43 7360-15 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 3,000 2,500 3,000 2,500 2,000 3,000 2,500 2,000 1,000 1,000 500 1,000 1,000 1,000 1,000 500 500 500 1,000 1,000 250 N/A 10,000 N/A 10,000 N/A 10,000 8,000 8,000 5,000 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000 2,000 3,000 3,000 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 20 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØD0 P0 (10 pitches cumulative tolerance on tape ±0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 ØD1 Cover Tape User Direction of Unreeling Table 4 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5 +0.10/−0.0 (0.059 +0.004/−0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 R Reference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 ±0.10 4.0 ±0.10 2.0 ±0.05 (0.069 ±0.004) (0.157 ±0.004) (0.079 ±0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single (4 mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single (4 mm) and Double (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 ±0.05 2.0 ±0.05 or 4.0 ±0.10 (0.138 ±0.002) (0.079 ±0.002 or 0.157 ±0.004) 2.0 ±0.05 (0.079 ±0.002) or 5.5 ±0.05 4.0 ±0.10 (0.157 ±0.004) or (0.217 ±0.002) 8.0 ±0.10 (0.315 ±0.004) T2 Maximum W Maximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481–D for standards relating to more precise taping requirements. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 21 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Packaging Information Performance Notes 1. Cover tape break force: 1.0 kg minimum. 2. Cover tape peel strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 mm 0.1 to 1.3 newton (10 to 130 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 2 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 ° T) ° s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline ° S) Ao Figure 3 – Maximum Lateral Movement Figure 4 – Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com Bending Radius R T2077_T540-541 • 9/24/2020 22 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Figure 5 – Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (Ø 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 ±0.20 (7.008 ±0.008) or 330 ±0.20 (13.000 ±0.008) 1.5 (0.059) 13.0 +0.5/−0.2 (0.521 +0.02/−0.008) 20.2 (0.795) 12 mm Variable Dimensions — Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4 +1.5/−0.0 (0.331 +0.059/−0.0) 12.4 +2.0/−0.0 (0.488 +0.078/−0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape width without interference © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 23 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC Figure 6 – Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 – Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 24 KEMET Organic Capacitor (KO-CAP ®) – High Reliability T540/T541 High Reliability Series (HRA) Polymer Electrolytic, 2.5 – 63 VDC KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com T2077_T540-541 • 9/24/2020 25