AA2214VR4D1S

2.2x1.4mm SURFACE MOUNT LED LAMP AA2214VR4D1S SERIES ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features 2.2mm x 1.4mm, 1.3mm high. Low power consumption. Available on tape and reel. Package : 2000pcs / reel. Moisture sensitivity level : level 3. RoHS compliant. Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAK2997 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/29/2009 DRAWN: F.F.Zhou PAGE: 1 OF 7 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter of the nozzle should be as large as possible. 5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. SPEC NO: DSAK2997 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/29/2009 DRAWN: F.F.Zhou PAGE: 2 OF 7 Selection Guide Erp Part No. Dice Lens Type Min. 1201005923 1201005921 1201005922 AA2214VR4D1S-C1 AA2214VR4D1S-N1 AA2214VR4D1S-W2 Cool White Neutral White Warm White WATER CLEAR WATER CLEAR WATER CLEAR 5310K 3710K 2870K CCT Range Typ. 6000K 4000K 3000K Max. 7040K 4260K 3220K Iv (mcd) [2] @ 20mA Min. 900 650 650 Typ. 1300 1200 1100 Viewing Angle [1] 2θ1/2 120° 120° 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol VF [1] IR C Note: 1. Forward Voltage: +/-0.1V. Parameter Forward Voltage Reverse Current Capacitance Typ. 3.3 Max. 4.0 10 Units V uA pF Test Conditions IF=20mA VR = 5V VF=0V;f=1MHz 100 Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Cool White / Neutral White / Warm White 120 30 100 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAK2997 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/29/2009 DRAWN: F.F.Zhou PAGE: 3 OF 7 SPEC NO: DSAK2997 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/29/2009 DRAWN: F.F.Zhou PAGE: 4 OF 7 CCT 2500-7000 K Bin Code 0.44 4000 K 7 5 4 3 3000 K 1 2500 K 0.42 0.40 5000 K 13 15 17 6000 K 19 21 7000 K 23 25 27 26 24 20 22 16 18 14 12 9 11 8 10 6 2 0.38 y W1 W2 W3 0.36 N1 0.34 N2 0.32 28 C1 0.32 0.34 0.36 0.38 x 0.40 0.42 0.44 0.46 0.48 0.50 0.30 0.28 0.30 Color Warm White Neutral White Cool White x 0.4582 0.4687 0.4813 0.4700 0.4483 2 0.4582 0.4700 0.4593 0.4465 3 0.4562 0.4687 0.4582 0.4373 4 0.4465 0.4582 0.4483 0.4342 5 0.4430 0.4562 0.4465 0.4259 6 0.4342 0.4465 0.4373 0.4221 7 0.4299 0.4430 0.4342 SPEC NO: DSAK2997 APPROVED: WYNEC Group Chromaticity Regions W1 W2 W3 N1 N2 C1 y 0.4099 0.4289 0.4319 0.4126 0.3919 0.4099 0.4126 0.3944 0.4071 0.4260 0.4289 0.4099 0.3893 0.4071 0.4099 0.3919 0.4028 0.4212 0.4260 0.4071 0.3853 0.4028 0.4071 0.3893 0.3984 0.4165 0.4212 0.4028 14 13 12 11 10 9 1, 2, 3, 4 5, 6, 7, 8 9, 10, 11, 12 13, 14, 15, 16 17, 18, 19, 20, 21, 22 23, 24, 25, 26, 27, 28 x 0.4147 0.4221 0.4342 0.4259 0.4080 0.4146 0.4299 0.4221 0.4017 0.4080 0.4221 0.4147 0.3941 0.3996 0.4146 0.4080 0.3889 0.3941 0.4080 0.4017 0.3825 0.3869 0.4006 0.3950 0.3783 0.3825 0.3950 0.3898 Min. 2580 2870 3220 3710 4260 5310 y 0.3814 0.3984 0.4028 0.3853 0.3916 0.4089 0.4165 0.3984 0.3751 0.3916 0.3984 0.3814 0.3848 0.4015 0.4089 0.3916 0.3690 0.3848 0.3916 0.3751 0.3798 0.3958 0.4044 0.3875 0.3646 0.3798 0.3875 0.3716 CCT (K) Typ. 2700 3000 3500 4000 4700 6000 Max. 2870 3220 3710 4260 5310 7040 x N otes: Shipment may contain more than one chromaticity regions.Orders for single chromaticity region are generally not accepted. Measurement tolerance of the chromaticity coordinates is ±0.01. y 0.3722 0.3874 0.3958 0.3798 0.3578 0.3722 0.3798 0.3646 0.3874 0.3788 0.3641 0.3726 0.3726 0.3641 0.3495 0.3578 0.3788 0.3702 0.3557 0.3641 0.3641 0.3557 0.3411 0.3495 0.3702 0.3616 0.3472 0.3557 28 27 26 25 24 23 x 0.3481 0.3370 0.3364 0.3466 0.3376 0.3260 0.3265 0.3370 0.3370 0.3265 0.3270 0.3364 0.3260 0.3144 0.3160 0.3265 0.3265 0.3160 0.3175 0.3270 0.3144 0.3028 0.3055 0.3160 0.3160 0.3055 0.3081 0.3175 y 0.3557 0.3472 0.3328 0.3411 0.3616 0.3512 0.3371 0.3472 0.3472 0.3371 0.3230 0.3328 0.3512 0.3408 0.3274 0.3371 0.3371 0.3274 0.3139 0.3230 0.3408 0.3304 0.3177 0.3274 0.3274 0.3177 0.3049 0.3139 1 8 15 0.3702 0.3736 0.3869 0.3825 0.3670 0.3702 0.3825 0.3783 0.3736 0.3616 0.3592 0.3703 0.3703 0.3592 0.3568 0.3670 0.3616 0.3496 0.3481 0.3592 0.3592 0.3481 0.3466 0.3568 0.3496 0.3376 0.3370 0.3481 22 16 17 18 19 20 21 REV NO: V.1 CHECKED: Allen Liu DATE: DEC/29/2009 DRAWN: F.F.Zhou PAGE: 5 OF 7 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAK2997 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/29/2009 DRAWN: F.F.Zhou PAGE: 6 OF 7 PACKING & LABEL SPECIFICATIONS AA2214VR4D1S SERIES SPEC NO: DSAK2997 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: DEC/29/2009 DRAWN: F.F.Zhou PAGE: 7 OF 7