AP1608MBC

1.6X0.8mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES AP1608MBC BLUE Features •1.6mmX0.8mm SMT LED, 1.1mm THICKNESS. •LOW POWER CONSUMPTION. •W IDE VIEW ING ANGLE. •IDEAL FOR BACKLIGHT AND INDICATOR. •VARIOUS COLORS AND LENS TYPES AVAILABLE. •PACKAGE: 2000PCS / REEL . •RoHS COMPLIANT. Description The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD0923 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: B.H.LI PAGE: 1 OF 4 ERP: 1203000018 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP1608MBC BLUE (GaN) WATER CLEAR 4 Typ. 10 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 430 466 60 100 3.8 4.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD0923 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: B.H.LI PAGE: 2 OF 4 ERP: 1203000018 Blue AP1608MBC SPEC NO: DSAD0923 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: B.H.LI PAGE: 3 OF 4 ERP: 1203000018 AP1608MBC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD0923 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: B.H.LI PAGE: 4 OF 4 ERP: 1203000018