AP2012EC

2.0x1.25mm SMD CHIP LED LAMP AP2012EC HIGH EFFICIENCY RED Features 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA4049 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 1 OF 4 ERP:1203000098 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AP2012EC HIGH EFFICIENCY RED (GaAsP/GaP) WATER CLEAR 4 Typ. 12 Viewing Angle 2 θ 1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red Typ. 627 625 45 15 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. High Efficiency Red 105 30 160 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAA4049 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 2 OF 4 ERP:1203000098 High Efficiency Red AP2012EC SPEC NO: DSAA4049 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 3 OF 4 ERP:1203000098 AP2012EC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA4049 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/18/2005 DRAWN: Y.W.WANG PAGE: 4 OF 4 ERP:1203000098