APD2520MGC03

4.5x2mm SMD CHIP LED LAMP APD2520MGC03 MEGA GREEN Features 4.5x2mm SMT LED,0.5mm THICKNESS LOW POWER CONSUMPTION. I DEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 1000PCS/REEL. RoHS COMPLIANT. Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD1076 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP:1203001025 Selection Guide Iv (mcd) @ 20mA Min. APD2520MGC03 MEGA GREEN (InGaAlP) WATER CLEAR 110 Typ. 400 Viewing Angle 2θ1/2 20° Part No. Dice Lens Type Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Typ. 574 568 26 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Mega Green 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1076 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP:1203001025 Mega Green APD2520MGC03 SPEC NO: DSAD1076 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP:1203001025 APD2520MGC03 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1076 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/10/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP:1203001025