APED3528VGC-A-F01

3.5 x2.8mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APED3528VGC/A-F01 Green Features SINGLE COLOR. SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. IDEAL FOR BACKLIGHTING. AVAILABLE ON TAPE AND REEL. PACKAGE: 500PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3740 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203005751 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APED3528VGC/A-F01 Green (InGaN) WATER CLEAR 110 Typ. 300 Viewing Angle [1] 2θ1/2 40 ° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 520 525 35 100 3.2 4 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 120 30 100 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAH3740 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203005751 Green APED3528VGC/A-F01 SPEC NO: DSAH3740 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203005751 APED3528VGC/A-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH3740 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203005751 PACKING & LABEL SPECIFICATIONS APED3528VGC/A-F01 SPEC NO: DSAH3740 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203005751