APF3236SURKVGAPBA

3.2mmx3.6mm FULL-COLOR SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APF3236SURKVGAPBA Hyper Red Green Blue Features LOW POWER CONSUMPTION. 3.2mmx3.6mm SMT LED, 1.1mm THICKNESS. ONE RED, ONE GREEN AND ONE BLUE CHIPS IN ONE PACKAGE. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. PACKAGE : 1000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5709 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1203005400 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Hyper Red (InGaAlP) APF3236SURKVGAPBA Green (InGaN) Blue (InGaN) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 Typ. 150 150 60 70 WATER CLEAR 50 18 120° Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Peak Wavelength Device Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Blue Typ. 650 520 468 635 525 470 28 35 21 35 100 100 1.95 3.2 3.2 2.5 4 4 10 10 10 Max. Units nm Test Conditions IF=20mA λD [1] Dominant Wavelength nm IF=20mA Δλ1/2 Spectral Line Half-width nm IF=20mA C Capacitance pF VF=0V;f=1MHz VF [2] Forward Voltage V IF=20mA IR Reverse Current uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 75 30 185 Green 120 30 100 5 -40°C To +85°C -40°C To +85°C Blue 120 30 100 Units mW mA mA V SPEC NO: DSAG5709 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1203005400 APF3236SURKVGAPBA Hyper Red SPEC NO: DSAG5709 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1203005400 Green SPEC NO: DSAG5709 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1203005400 Blue SPEC NO: DSAG5709 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1203005400 APF3236SURKVGAPBA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5709 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1203005400 PACKING & LABEL SPECIFICATIONS APF3236SURKVGAPBA SPEC NO: DSAG5709 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1203005400