APKA2810TGC

2 .8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES APKA2810TGC GREEN Features 2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm THICKNESS. LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Green source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25( ± 0.01") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAD1134 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL /02/2005 DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1204000371 S election Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APKA2810TGC GREEN (InGaN) WATER CLEAR 70 Typ. 150 Viewing Angle 2θ1/2 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 500 505 30 56 3.6 4.4 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 110 30 150 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAD1134 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL /02/2005 DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1204000371 Green APKA2810TGC S PEC NO: DSAD1134 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL /02/2005 DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1204000371 APKA2810TGC R ecommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: DSAD1134 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL /02/2005 DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1204000371 PACKING & LABEL SPECIFICATIONS APKA2810TGC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAD1134 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL /02/2005 DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1204000371