APTD1608SECK

1.6X0.8mm SMD CHIP LED LAMP Part Number: APTD1608SECK Super Bright Orange Features z 1.6mmX0.8mm SMT LED, 0.95mm thickness. z Low power consumption. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package: 2000pcs / reel . z Moisture sensitivity level : level 3. z RoHS compliant. Description The Super Bright Orange device is made with AlGaInP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ7592 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2010 DRAWN: Y.F.Lv PAGE: 1 OF 5 ERP:1203009944 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APTD1608SECK Super Bright Orange (AlGaInP) WATER CLEAR 480 Typ. 800 Viewing Angle [1] 2 1/2 60° Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol peak D [1] 1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAJ7592 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2010 DRAWN: Y.F.Lv PAGE: 2 OF 5 ERP:1203009944 Super Bright Orange APTD1608SECK SPEC NO: DSAJ7592 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2010 DRAWN: Y.F.Lv PAGE: 3 OF 5 ERP:1203009944 APTD1608SECK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAJ7592 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2010 DRAWN: Y.F.Lv PAGE: 4 OF 5 ERP:1203009944 PACKING & LABEL SPECIFICATIONS APTD1608SECK SPEC NO: DSAJ7592 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/10/2010 DRAWN: Y.F.Lv PAGE: 5 OF 5 ERP:1203009944