APTF1616PBASURKCGKC

1.6x1.6mm FULL-COLOR SURFACE MOUNT LED PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APTF1616PBASURKCGKC Blue Hyper Red Green Features 1.6mmX1.6mm SMT LED, 0.7mm THICKNESS LOW POWER CONSUMPTION ONE BLUE, ONE RED AND ONE GREEN CHIPS IN ONE PACKAGE CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Red source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH8860 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 1 OF 7 ERP: 1203007427 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Blue (InGaN) APTF1616PBASURKCGKC Hyper Red (InGaAlP) Green (InGaAlP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 Typ. 40 230 50 10 WATER CLEAR 110 18 120° Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Peak Wavelength Device Blue Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Blue Hyper Red Green Typ. 468 650 574 470 635 570 21 28 20 100 35 15 3.2 1.95 2.1 4 2.5 2.5 10 10 10 Max. Units nm Test Conditions IF=20mA λD [1] Dominant Wavelength nm IF=20mA Δλ1/2 Spectral Line Half-width nm IF=20mA C Capacitance pF VF=0V;f=1MHz VF [2] Forward Voltage V IF=20mA IR Reverse Current uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 120 30 100 Hyper Red 75 30 185 5 -40°C To +85°C -40°C To +85°C Green 75 30 150 Units mW mA mA V SPEC NO: DSAH8860 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 2 OF 7 ERP: 1203007427 APTF1616PBASURKCGKC Blue SPEC NO: DSAH8860 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 3 OF 7 ERP: 1203007427 Hyper Red SPEC NO: DSAH8860 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 4 OF 7 ERP: 1203007427 Green SPEC NO: DSAH8860 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 5 OF 7 ERP: 1203007427 APTF1616PBASURKCGKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH8860 APPROVED: WYNEC REV NO: V.1 assesso r 數位簽署者：assessor DN：cn=assessor, o, ou, email=assessor@cn. kingbright.com, c= 日期︰2007.11.07 14:18:32 +08'00' DATE: NOV/06/2007 PAGE: DRAWN: C.WANG 6 OF 7 CHECKED: Allen Liu ERP: 1203007427 PACKING & LABEL SPECIFICATIONS APTF1616PBASURKCGKC SPEC NO: DSAH8860 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 7 OF 7 ERP: 1203007427