BLFA064SURCK12V

6mm FLANGE BASED LED LAMP BLFA064SURCK12V HYPER RED Features !BUILT-IN Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. CURRENT LIMITING RESISTOR FOR DIRECT APPLICATION OF DIFFERENT ACROSS CURRENT. ! LONG ! LOW ! LOW LIFE. CURRENT, POWER SAVINGS. MAINTENANCE. COLOR AVAILABLE. ! DIFFERENT ! SOLID ! 12V STATE, HIGH VIBRATION RESISTANT. INTERNAL RESISTOR. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1601 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE: APR/08/2003 DRAWN: F.Y.YUAN PAGE: 1 OF 3 Selection Guide P ar t N o . Dic e L en s Ty p e Iv (m c d ) V=12V Min . BLFA064SURCK12V HYPER RED ( InGaAlP ) WATER CLEAR 650 Ty p . 1100 V i ew i n g An g l e 2θ 1 / 2 110° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Sy m b o l λpeak λD ∆λ1/2 C IF IR P ar am et er Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Current Reverse Current D ev i c e Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Ty p . 650 635 28 35 10 10 Max . Un its nm nm nm pF mA uA Tes t Co n d it io n s V F=1 2 V V F=1 2 V V F=1 2 V V F = 0 V;f= 1 M Hz V F=1 2 V VR = 5V Absolute Maximum Ratings at TA=25°C P ar am et er Power dissipation Forward Voltage Reverse Voltage Operating Temperature Storage Temperature H y p er R ed 140 14 5 -40 °C To +70 °C -40 °C To + 85 °C Un its mW V V SPEC NO: DSAD1601 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE: APR/08/2003 DRAWN: F.Y.YUAN PAGE: 2 OF 3 Hyper Red BLFA064SURCK12V SPEC NO: DSAD1601 APPROVED : J. Lu REV NO: V.1 CHECKED : Allen Liu DATE: APR/08/2003 DRAWN: F.Y.YUAN PAGE: 3 OF 3