0805E102K101KHT

High Temperature Chip A range of chip capacitors, available in sizes 0805 to 7565, designed to operate from -55°C to 150°C, (Class 2 dielectric) and from -55ºC to 200ºC (C0G & Class II dielectrics). Voltage ratings of 25V to 4kV. l For dielectric characteristics see pages 4 & 7. l For dimensions see page 12. l For termination options see pages 3 & 15. l For ordering information, inc. tolerances available, see page 15. Note: Maximum capacitance values are shown below as 3 digit code: 2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF. Maximum capacitance values - 150oC X8R (S) dielectric Size 0805 1206 1210 1812 1825 2225 4540 7565 Min cap. 121 221 221 221 102 102 102 222 25V 563 184 334 684 125 155 565 156 50V 473 154 274 564 105 125 475 126 100V 333 104 184 394 824 105 395 106 250V 183 333 823 154 474 564 275 695 500V 562 153 393 563 124 154 125 325 Maximum capacitance values - 160oC C0G (F)/Class II (G) and 200oC C0G (D)/Class II (E) dielectrics Size Min cap. Tmax inches: mm: 0805 0R5 121 0.054 1.37 1206 1R0 121 0.064 1.63 1210 5R0 121 0.065 1.65 1515 5R0 151 0.130 3.30 1808 120 151 0.065 1.65 1812 220 151 0.065 1.65 1825 330 471 0.080 2.03 2225 470 471 0.080 2.03 3530 221 102 0.250 6.35 4540 390 102 0.300 7.62 6560 560 222 0.300 7.62 7565 101 222 0.300 7.62 Dielectric C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II C0G Class II 25V 272 823 562 224 123 394 223 824 123 334 223 684 563 155 563 185 104 395 184 565 334 156 394 186 50V 182 473 392 124 822 224 183 684 822 274 153 474 393 105 473 125 823 275 154 475 274 126 334 156 100V 681 183 182 473 332 104 103 274 332 823 822 154 153 474 183 474 563 225 104 335 224 825 274 126 250V 181 472 102 103 222 273 392 683 222 223 562 473 123 124 183 154 333 564 563 125 124 275 154 395 500V 101 102 391 222 821 562 272 183 102 562 222 103 392 273 562 333 123 124 273 334 563 684 683 824 1kV 470 181 101 391 221 821 821 272 221 821 561 152 821 472 102 562 562 273 153 683 333 154 393 224 2kV • • 270 • 3kV • • • • • • 820 • 4kV • • • • • • 470 • 560 151 181 561 560 • 121 221 181 561 271 681 152 682 332 183 822 393 103 473 220 • 560 • 820 • 101 • 561 272 152 682 332 153 392 183 120 • 270 • 330 • 470 • 331 122 821 272 182 562 222 822 www.novacap.com | Phone: +1.661.295.5920 | 39 Case Size Dielectric Capacitance Capacitance Tolerance Voltage Termination Special Thickness High Reliability Testing Packaging Marking XX 1206 N 472 J 101 N X050 H T M High Reliability Test Criteria Prefix Chip Ordering Information - HB Capacitance Code 1st two digits are significant, third digit denotes number of zeros, R = decimal Examples: 1R0 = 1.0pF Special Thickness Packaging Marking 120 = 12pF None Standard thickness as per Novacap catalog specifications None Bulk None Unmarked 471 = 470pF X 102 = 1,000pF 273 = 0.027µF 474 = 0.47µF 105 = 1.0µF Denotes a special thickness other than standard. Specify in inches if required. (As shown above X = 0.050”) C0G/NP0 Ultra Stable M C0G/NP0 Ultra Stable Magnetic Free F C0G/NP0 High Temp. (up to 160ºC) D C0G/NP0 High Temp. (up to 200ºC) K R3L R R2D Pulse Energy Y5V General Purpose Z Z5U General Purpose B X7R Stable C X7R Stable Magnetic Free X BX MIL S X8R E Class II G Class II High Temp. (up to 160ºC) W X5R Stable RN Lead free C0G/NP0 Ultra Stable RB Lead free X7R Stable BB X7R BME Stable BW X5R BME Stable Waffle Pack None Standard product H High Reliability Testing H High Temp Screening M Marked *Marking not available on sizes < 0603 { Hi-Reliability Testing Criteria HB MIL-PRF-55681 Group A HV MIL-PRF-49467 Group A HS MIL-PRF-123 Group A Termination Codes Voltage Code Ultra Stable Y Tape & Reel High Reliability Testing Dielectric Codes N T W 1st two digits are significant, third digit denotes number of zeros. For example: 160 = 16 Volts 101 = 100 Volts 501 = 500 Volts High Temp. (up to 150ºC) 102 = High Temp. (up to 200ºC) 502 = 103 = P Palladium Silver PR Palladium Silver* K Solderable Palladium Silver* N Nickel Barrier* 100% tin Y Nickel Barrier 90% tin, 10% lead NG Nickel Barrier Gold Flash* C FlexiCap™/Nickel Barrier* 100% tin D FlexiCap™/Nickel Barrier 90% tin, 10% lead 1,000 Volts B Copper Barrier* 100% tin 5,000 Volts E Copper Barrier 90% tin, 10% lead 10,000 Volts S Silver* * Indicates RoHS terminations Capacitance Tolerance Codes Code Tolerance N M B ±0.10pF • • Prefix Definitions C ±0.25pF • • None D ±0.50pF • • Cap. Value < 10pF * Not RF series Standard chip Y5V R3L R2D Z5U C0G/NP0 F/D K R Y/Z X7R BX X8R B C X S Positive Class X5R VTC II E/G W P • • RF Improved ESR Capacitor p. 23 F ±1% • • • LS Y3 Certified Safety Capacitor p. 42 - 43 G ±2% • • • • ES Y Certified Safety Capacitor p. 42 - 43 J ±5% • • • • • •* • •* • • ST Stacked Capacitor Assembly p. 48 - 53 K ±10% • • • • • • • • • • • • SM Stacked Hi-Rel Capacitor Assembly p. 48 - 53 M ±20% • • • • • • • • • • • • CR Cap-Rack Capacitor Array p. 54 Z +80% -20% • • • •* • RC Bleed Resistor p. 58 - 61 P +100% -0% • • • •* • 2 www.novacap.com | Phone: +1.661.295.5920 | 15 T Technical Summary W Technical Information Novacap provides application notes throughout this catalog as a guide to chip selection and attachment methods. Refer to the Novacap Technical Brochure found at www.novacap. com for more details. This technical information includes the nature of capacitance, dielectric properties, electrical properties, classes of dielectrics, ferroelectric behavior, test standards, and high reliability test plans. Please do not hesitate to contact the sales office for any product or technical assistance. Primary Dielectric Types C0G/NP0: Ultra stable Class I dielectric, with negligible dependence of capacitance on temperature, voltage, frequency, and time. Used in circuitry requiring very stable performance. X7R: Stable Class II dielectric, with predictable change in properties across a temperature range of -55°C to +125°C. Used as blocking, decoupling, bypassing, and frequency discriminating elements. This dielectric is ferroelectric and provides higher capacitance than Class I materials. Capacitor Size Size availability is based primarily on capacitance values and voltage rating. Smaller units are generally less expensive. Because mass affects the thermal shock susceptibility of chip capacitors, size selection should consider the soldering method used to attach the chip to the board. Sizes 1812 and smaller can be wave, vapor phase, or reflow soldered. Larger units require reflow soldering. BX: The military specification for ceramic chip capacitors (MILPRF-55681) defines a mid-K stable dielectric designated as BX. The BX specification has voltage temperature limits in addition to temperature limits of capacitance. The BX dielectric is limited to ±15% maximum change in capacitance between 25°C and -55°C or +125°C and also has a voltage restriction of +15% / -25% maximum change in capacitance between 25°C and -55°C or +125°C at rated voltage. Chip Selection Multilayer capacitors (MLC) are categorized by dielectric performance with temperature. The Temperature Coefficient of Capacitance describes the variance of capacitance value with temperature. The choice of components is therefore largely determined by the temperature stability required of the device and the size necessary for the desired capacitance value and voltage rating. • • • • • • • • • • • • • • • • • • • • • • • • FlexiCap™/Nickel Barrier 100% tin RoHS RoHS NG C • • • • • • • • • • • • D • • • Solderable Silver Y • • • • • • Nickel Barrier Gold flash Nickel Barrier 90/10% tin/lead Nickel Barrier 100% tin Solderable Palladium Silver RoHS RoHS RoHS PR K N • • • • • • • • • • • • • • Solder Attachment: N Nickel Barrier, 100% matte tin plated - RoHS RoHS B E RoHS S • Y Nickel Barrier, tin-lead plated • • • • • • • • • • • • • • • • • • • We recommend the following termination types: Copper Barrier 90/10% tin/lead P • • • Termination Material Copper Barrier 100% tin Code N/RN K B/RB BB BW X Y Z M C S F D G E P R Palladium Silver Palladium Silver Dielectric C0G/NP0 R3L X7R X7R BME X5R BME BX Y5V Z5U C0G/NP0 (Mag free) X7R (Mag free) X8R C0G/NP0 (160ºC) C0G/NP0 (200ºC) Class II (160ºC) Class II (200ºC) Pulse Power R2D FlexiCap™/Nickel Barrier 90/10% tin/lead Z5U/Y5V: General purpose Class III dielectrics with higher dielectric constant and greater variation of properties over temperature and voltage. Very high capacitance per volume is attainable for general purpose applications where stability over a wide temperature range is not critical. Packaging Units are available reeled, in waffle pack, or bulk packaged. Bar coded labels are standard for reeled and bulk packaging. Dielectric Termination Combinations MB C FlexiCap™ with Nickel Barrier, 100% tin plated - RoHS D FlexiCap™ Nickel Barrier, tin-lead plated B Copper Barrier 100% matte tin plated - RoHS E Copper Barrier, tin-lead plated K Solderable Palladium Silver - RoHS (suitable for conductive epoxy attach) • • S Solderable Silver - RoHS • • • • • Conductive Epoxy attachment: P Palladium Silver PR Palladium Silver - RoHS NG Nickel Barrier Gold Flash RoHS (suitable for soldering attach) www.novacap.com | Phone: +1.661.295.5920 | 3 Dielectric Characteristics C0G/NP0 (N) Ultra Stable and RoHS 2013 (RN) type -55°C to 125°C Temperature coefficient: 0 ±30 ppm/ºC Dissipation factor: 0.1% max @ 25ºC Insulation resistance Dielectric withstanding voltage @25ºC: @125ºC: 500V: >100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C 1MHz for Capacitance 1000WF or >10000WF whichever is less >100WF or >1000WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C 1MHz for Capacitance 100GW or >1000WF whichever is less >1GW or >10WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C 1MHz for Capacitance 1000WF whichever is less >1GW or >10WF whichever is less Dielectric withstanding voltage @25ºC: @200ºC: 500V: 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 ±0.2 VRMS, 25°C 1MHz for capacitance 25V rating: 100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater 20 UPPER LIMIT 15 10 5 TYPICAL 0 -5 -10 -15 -20 -55 25V rating: 100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater 20 UPPER LIMIT 15 10 5 TYPICAL 0 -5 -10 -15 -20 -55 25V rating: 100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 100GW or >1000WF whichever is less >1GW or >10WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater 15 < 2.0% per decade Test parameters: TEMPERATURE COEFFICIENT % DC % CAPACITANCE CHANGE Operating temperature range: 0 -15 -30 -45 -60 -75 -55 -25 0 25 50 75 100 125 150 TEMPERATURE °C 1KHz, 1.0 ±0.2 VRMS, 25°C Class II (E) Stable High Temperature (up to 200ºC) -55°C to 200°C Temperature coefficient up to 200ºC: +15 -65% DC Max. Dissipation factor @ 25ºC: 2.5% Max. Insulation resistance Dielectric withstanding voltage @25ºC: @200ºC: 500V: Ageing rate: Test parameters: >100GW or >1000WF whichever is less >1GW or >10WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater TEMPERATURE COEFFICIENT % DC 15 % CAPACITANCE CHANGE Operating temperature range: < 2.0% per decade 0 -15 -30 -45 -60 -75 -55 -25 0 25 50 75 100 125 150 175 200 TEMPERATURE °C 1KHz, 1.0 ±0.2 VRMS, 25°C X5R (W) Stable -55°C to 85°C Temperature coefficient up to 200ºC: ±15% DC Max. Dissipation factor @ 25ºC: 5% Max. Insulation resistance @25%: >10GW or >500WF whichever is less Dielectric withstanding voltage: 250% Ageing rate: < 5.0% per decade Test parameters: Except: 22µF, 47µF & 100µF 1KHz, 1.0 ±0.2 VRMS, 25°C 120KHz, 0.5 ±0.1 VRMS, 25°C TEMPERATURE COEFFICIENT % DC 10 %CAPACITANCE CHANGE Operating temperature range: 0 -10 -20 -30 -55 -35 -15 5 25 45 65 85 TEMPERATURE °C www.novacap.com | Phone: +1.661.295.5920 | 7 Chip Dimensions L T W MB Dimensions - inches (mm) Size Length (L) Width (W) Max. Thickness (T)* Termination Band (MB) 0402 0.040 ± 0.004 (1.02 ± 0.102) 0.020 ± 0.004 (0.508 ± 0.102) 0.024 (0.610) 0.010 ± 0.006 (0.254 ± 0.152) 0504 0.050 ± 0.006 (1.27 ± 0.152) 0.040 ± 0.006 (1.02 ± 0.152) 0.044 (1.12) 0.014 ± 0.006 (0.356 ± 0.152) 0.055 +0.015 -0.010 (1.4 +0.38 -0.25) 0.055 ± 0.015 (1.40 ± 0.381) 0.057 (1.45) 0.014 ± 0.006 (0.356 ± 0.152) 0603 0.060 ± 0.006 (1.52 ± 0.152) 0.030 ± 0.006 (0.762 ± 0.152) 0.035 (0.889) 0.014 ± 0.006 (0.356 ± 0.152) 0805 0.080 ± 0.008 (2.03 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254) 0907 0.090 ± 0.008 (2.29 ± 0.203) 0.070 ± 0.008 (1.78 ± 0.203) 0.060 (1.52) 0.020 ± 0.010 (0.508 ± 0.254) 1005 0.100 ± 0.008 (2.54 ± 0.203) 0.050 ± 0.008 (1.27 ± 0.203) 0.054 (1.37) 0.020 ± 0.010 (0.508 ± 0.254) 0.110+0.025 -0.010 (2.79 +0.64 -0.25) 0.110 ± 0.015 (2.79 ± 0.381) 0.102 (2.59) 0.020 ± 0.010 (0.508 ± 0.254) 1206 0.125 ± 0.008 (3.18 ± 0.203) 0.060 ± 0.008 (1.52 ± 0.203) 0.064 (1.63) 0.020 ± 0.010 (0.508 ± 0.254) 1210 0.125 ± 0.008 (3.18 ± 0.203) 0.100 ± 0.008 (2.54 ± 0.203) 0.065 (1.65) 0.020 ± 0.010 (0.508 ± 0.254) 1515 0.150 ± 0.015 (3.81 ± 0.381) 0.150 ± 0.015 (3.81 ± 0.381) 0.130 (3.30) 0.030 ± 0.015 (0.762 ± 0.381) 1808 0.180 ± 0.012 (4.57 ± 0.305) 0.080 ± 0.008 (2.03 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356) 1812 0.180 ± 0.012 (4.57 ± 0.305) 0.125 ± 0.008 (3.18 ± 0.203) 0.065 (1.65) 0.024 ± 0.014 (0.610 ± 0.356) 1825 0.180 ± 0.012 (4.57 ± 0.305) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.024 ± 0.014 (0.610 ± 0.356) 2020 0.200 ± 0.015 (5.08 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.024 ± 0.014 (0.610 ± 0.356) 2221 0.220 ± 0.015 (5.59 ± 0.381) 0.210 ± 0.015 (5.33 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381) 2225 0.220 ± 0.015 (5.59 ± 0.381) 0.250 ± 0.015 (6.35 ± 0.381) 0.080 (2.03) 0.030 ± 0.015 (0.762 ± 0.381) 2520 0.250 ± 0.015 (6.35 ± 0.381) 0.200 ± 0.015 (5.08 ± 0.381) 0.180 (4.57) 0.030 ± 0.015 (0.762 ± 0.381) 0.230 +0.020 -0.012 (5.84 +0.51 -0.30) 0.250 ± 0.015 (6.35 ± 0.381) 0.165 (4.19) 0.030 ± 0.015 (0.762 ± 0.381) 3333 0.330 ± 0.017 (8.38 ± 0.432) 0.330 ± 0.017 (8.38 ± 0.432) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381) 3530 0.350 ± 0.018 (8.89 ± 0.457) 0.300 ± 0.015 (7.62 ± 0.381) 0.250 (6.35) 0.030 ± 0.015 (0.762 ± 0.381) 4040 0.400 ± 0.020 (10.2 ± 0.508) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 4540 0.450 ± 0.023 (11.4 ± 0.584) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 5440 0.540 ± 0.027 (13.7 ± 0.686) 0.400 ± 0.020 (10.2 ± 0.508) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 5550 0.550 ± 0.028 (14.0 ± 0.711) 0.500 ± 0.025 (12.7 ± 0.635) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 6560 0.650 ± 0.033 (16.5 ± 0.838) 0.600 ± 0.030 (15.2 ± 0.762) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) 7565 0.750 ± 0.038 (19.1 ± 0.965) 0.650 ± 0.033 (16.5 ± 0.838) 0.300 (7.62) 0.040 ± 0.020 (1.02 ± 0.508) RF0505 RF1111 RF2525 * Non standard thicknesses are available - consult the sales office for details. 12 | Phone: +1.661.295.5920 | www.novacap.com