KGM1206ECTTE2201A

KGM three-terminal capacitor EU features • • • • Surface mount type noise filter Plated terminals provide excellent solder resistance Small size and high rated DC current 0603-2A, 0805-2A, 1206-2A series is available in signal lines in addition to power line • Marking: Black body color with no marking • Products with lead-free terminations meet EU RoHS requirements dimensions and construction L Size W 0603 t e Glass Coating g GND Terminals (Ag + Ni, Sn Plating) e Terminals (Ag + Ni, Sn Plating) 0805 1206 1812 L W t g e .063±.008 .031±.008 .024±.008 .020±.008 .008±.006 (1.6±0.2) (0.8±0.2) (0.5±0.2) (0.2±0.15) (0.6±0.2) .079±.008 .049±.008 .031±.008 .016±.012 .012±.008 (2.0±0.2) (1.25±0.2) (0.8±0.2)* (0.4±0.3) (0.3±0.2) .126±.008 .063±.008 .031±.008 .039±.012 (3.2±0.2) (1.6±0.2) (0.8±0.2)* (1.0±0.3) .016±.012 .177±.012 .126±.012 .039±.008 .039±.012 (0.4±0.3) (4.5±0.3) (3.2±0.3) (1.0±0.3) (1.0±0.2) * KGM0805 470 KGM1206CHT221/2A: KGM0805 101 t = .043 ± .008 (1.1 ± 0.2) KGM0805 222 t = .035 ± .008 (0.9 ± 0.2) ordering information New Part # KGM Type 0805 Size 0603 0805 1206 1812 For further information on packaging, please refer to Appendix A. H Rated Voltage C: 16V E: 25V V: 35V H: 50V C Temp. Charact. C F T Termination Material T: Sn TE Packaging TE: 7" embossed plastic (0603 - 4,000 pieces/reel) (0805 - 4,000 pieces/reel) (1206 - 2,000 pieces/reel) (1812 - 1,000 pieces/reel) 220 Capacitance 2 significant digits + no. of zeros 2A Rated Current 1A 2A 4A circuit schematic In Out temperature characteristics Temperature Character C F Temperature Range -25°C to +85°C Standard Temperature 20°C Rate of Change (Capacitance) ±15% -80 ~ +30% GND Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/24/08 KOA Speer Electronics, Inc. • Bolivar Drive • P Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com .O. 273 EMI/EMC filtering KGM three-terminal capacitor applications and ratings Part Designation KGM0603ECTTE2202A KGM0603ECTTE4702A KGM0603ECTTE1012A KGM0603ECTTE2212A KGM0603ECTTE4712A KGM0603ECTTE1022A KGM0603ECTTE2222A KGM0603CCTTE3322A KGM0603CFTTE2232A KGM0603CFTTE1042A KGM0805HCTTE2202A KGM0805HCTTE4702A KGM0805HCTTE1012A KGM0805ECTTE2212A KGM0805ECTTE4712A KGM0805ECTTE1022A KGM0805ECTTE2222A KGM0805ECTTE3322A KGM0805EFTTE1032A KGM0805EFTTE2232A KGM0805EFTTE1042A KGM0805ECTTE2224A KGM0805CFTTE1044A KGM1206ECTTE2201A KGM1206ECTTE4701A KGM1206ECTTE1011A KGM1206ECTTE2211A KGM1206ECTTE4711A KGM1206ECTTE1021A KGM1206ECTTE2221A KGM1206CCTTE3321A KGM1206HCTTE2202A KGM1206HCTTE4702A KGM1206HCTTE1012A KGM1206HCTTE2212A KGM1206HCTTE4712A KGM1206HCTTE1022A KGM1206VCTTE2222A KGM1206ECTTE2722A KGM1206ECTTE3322A KGM1206ECTTE1032A KGM1206EFTTE1042A KGM1812HCTTE4714A KGM1812HCTTE1024A KGM1812HCTTE2224A KGM1812ECTTE6824A Capacitance (pF) 22 47 100 220 470 1000 2200 3300 22,000 100,000 22 47 100 220 470 1000 2200 3300 10,000 22,000 100,000 2,000 100,000 22 47 100 220 470 1000 2200 3300 22 47 100 220 470 1000 2200 2700 3300 10,000 100,000 470 1000 2200 6800 Capacitance Tolerance (%) Rated Voltage DC (V) Rated Current DC (A) Insulation Resistance Minimum (MΩ) Operating Temperature Range NEW 25 +50 ~ -20 16 2 1000 -55°C to +125°C 50 2 +50 ~ -20 25 1000 -55°C to +125°C NEW 16 4 NEW 25 1 16 +50 ~ -20 50 2 35 25 1000 -55°C to +125°C +50 ~ -20 50 25 4 1000 -55°C to +125°C EMI/EMC filtering environmental applications Performance Characteristics Parameter Insulation Resistance Capacitance 1000 MΩ Minimum Within the tolerance Requirement Test Method Applied rated voltage for 60 seconds Frequency: 1kHz Voltage: 1Vrms DC: 0.3V Maximum Applied 250% of the rated voltage for 1 second to 5 seconds, limit surge current 50mA maximum 6/27/07 DC Resistance Dielectric Withstanding Strength 60 MΩ Maximum No breakdown Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 274 KOA Speer Electronics, Inc. • Bolivar Drive • P Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com .O. KGM three-terminal capacitor environmental applications (continued) Performance Characteristics Parameter Terminal Adhesion Strength Requirement No physical damage Test Method Solder a chip to a test substrate and then laterally apply a load (5N, 500gF) in the arrow direction Chip Substrate Resistance to Solder Heat Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Flux: 25% rosin Preheating: 60 seconds Preheating Temperature: 150°C Solder: H60A Solder Temperature: 260°C ±5°C Dip Time: 5 seconds ± 0.5 second Flux: 25% rosin Preheating: 60 seconds Preheating Temperature: 150°C Solder: H60A Solder Temperature: 230°C ±5°C Dip Time: 4 seconds ± 1 second Repeat the following heat cycle 10 times: Step: 1 2 3 4 Temperature: -40°C ± 3°C Room Temp. 85°C ± 2°C Room Temp. Time: 30 minutes 15 minutes 30 minutes 15 minutes ± 3 minutes maximum ± 3 minutes maximum Solderability More than 95% of the terminal electrode shall be covered with new solder Temperature Cycle* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance High Temperature Resistance* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Temperature: 70°C ± 2°C Bias: 150% of rated voltage Test Time: 1000 +48/-0 hours Humidity Resistance (Unload)* Temperature: 85°C ± 2°C Humidity: 85% ± 5% Test Time: 500 +24/-0 hours 20 Substrate Bending Test After soldering a chip to a test substrate, bend the substrate Substrate by 1 mm and then measure. The substrate is GE4 or based on GE4. 45 ± 2 Temperature: 40°C ± 2°C Humidity: 90 - 95% Bias: 100% of rated voltage Test Time: 500 +24/-0 hours Temperature: -40°C ± 2°C Test Time: 1000 +48/-0 hours Weight Displacement 45 ± 2 Humidity Resistance (Load)* Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Appearance: No physical damage Capacitance: Within tolerance Dielectric Loss: Within tolerance Insulation Resistance: Within tolerance Low Temperature Resistance (Unload)* Vibration The frequency of applied vibration should be swept from 10 Hz to 55 Hz and return to 10 Hz. This cycle time should be about 1 minute and this cycle should be repeated. Amplitude (Total Excursion): 1.5 mm This motion shall be applied for a period of 2 hours in each of 3 mutually perpendicular axes (total of 6 hours). * After temperature cycle test, high temperature resistance test, humidity resistance test or low temperature resistance test, the tested sample should be measured after having been left in temperature from 15°C to 35°C and relative humidity from 45% to 75% for 24 hours. Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3/05/07 KOA Speer Electronics, Inc. • Bolivar Drive • P Box 547 • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com .O. 275 EMI/EMC filtering