2SA1980S

2SA1980S PNP Silicon Transistor Description • General small signal amplifier PIN Connection Features • Low collector saturation voltage : VCE(sat)=-0.3V(Max.) • Low output capacitance : Cob=4pF(Typ.) • Complementary pair with 2SC5343S C B E SOT-23 Ordering Information Type NO. 2SA1980S Marking CA ① ②③ ①Device Code ②hFE Rank ③Year&Week Code Package Code SOT-23 Absolute Maximum Ratings Characteristic Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Collector power dissipation Junction temperature Storage temperature range * Package mounted on 99.5% alumina 10×8×0.6mm (Ta=25°C) Symbol VCBO VCEO VEBO IC PC* Tj Tstg Rating -50 -50 -5 -150 350 150 -55~150 Unit V V V mA mW °C °C Electrical Characteristics Characteristic Collector-emitter breakdown voltage Collector cut-off current Emitter cut-off current DC current gain Collector-emitter saturation voltage Transition frequency Collector output capacitance Noise figure (Ta=25°C) Symbol BVCEO ICBO IEBO hFE* VCE(sat) fT Cob NF Test Condition IC=-1mA, IB=0 VCB=-50V, IE=0 VEB=-5V, IC=0 VCE=-6V, IC=-2mA IC=-100mA, IB=-10mA VCE=-10V, IC=-1mA VCB=-10V, IE=0, f=1MHz VCE=-6V, IC=-0.1mA f=1KHz, Rg=10KΩ Min. Typ. Max. -50 70 80 4 10 -0.1 -0.1 700 -0.3 - Unit V μA μA V MHz pF dB *: hFE rank / O : 70~140, Y : 120~240, G : 200~400, L : 300~700. Preliminary 1 2SA1980S Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VBE Fig. 3 IC - VCE Fig. 4 hFE - IC Fig. 5 VCE(sat) - IC Preliminary 2 2SA1980S Outline Dimension ※Recommend PCB solder land [Unit: mm] Preliminary 3 2SA1980S The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Preliminary 4