SI5315-H

SI5315-H / SI5315-H(B) IRED Features • • • • Colorless transparency lens type φ5mm(T-13/4) all plastic mold type Low power consumption High radiant intensity Applications • Light source for remote control devices (This device should be only used at non- repetitive pulse mode) Outline Dimensions unit : mm STRAIGHT TYPE 4.80~5.20 STOPPER TYPE : (B) 4.80~5.20 0.05 Typ. 8.40~8.80 1.00 Max. 0.05 Typ. 1.20 Min. 8.40~8.80 1.00 Max. 2.90~3.90 0.60 Max. 26.00 Min. 1.27 Typ. 0.60 Max. 26.00 Min. 1.00 Min. 2.54 Typ. 2.54 Typ. 1.00 Min. 0.55 Max. 0.55 Max. 1 2 5.60~6.60 1 2 5.60~6.60 PIN Connections 1. Anode 2. Cathode KSD-O2S002-002 1 SI5315-H / SI5315-H(B) Absolute Maximum Ratings Characteristic Power dissipation * Forward current * Peak forward current Reverse voltage Operating temperature range Storage temperature range 3 2 1 (Ta=25℃) Symbol PD IF IFP VR Topr Tstg Rating 145 100 1 4 -25∼85 -30∼100 Unit mW mA A V ℃ ℃ * Soldering temperature Tsol 260℃ for 10 seconds *1. Avoid operating under continuous bias *2.Duty ratio = 1/100, Pulse width = 0.1ms *3.Keep the distance more than 2.0mm from PCB to the bottom of IRED package Electrical / Optical Characteristics Characteristic Forward voltage Radiant intensity Peak wavelength Spectrum bandwidth Reverse current (Ta=25℃) Symbol VF IE Test Condition IF= 50mA IF= 50mA IF= 50mA IF= 50mA VR=4V IF= 50mA Min. 20 - Typ. 1.3 40 950 50 ±20 Max. 1.45 10 - Unit V mW/Sr nm nm uA deg λP Δλ IR θ1/2 * Half angle 4 *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity KSD-O2S002-002 2 SI5315-H / SI5315-H(B) Characteristic Diagrams Fig. 1 IF-VF Fig. 2 IE - IF Forward Voltage VF [V] Luminous Intensity Iv [mcd] Forward Current IF [mA] Forward Current IF [mA] Fig. 3 IF – Ta Fig.4 Spectrum Distribution Current IF [mA] Forward Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] KSD-O2S002-002 3 SI5315-H / SI5315-H(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O2S002-002 4