ISPLSI2064A-125LT100

LeadFree Package Options Available! ® ispLSI 2064/A In-System Programmable High Density PLD Features Functional Block Diagram • ENHANCEMENTS — ispLSI 2064A is Fully Form and Function Compatible to the ispLSI 2064, with Identical Timing Specifcations and Packaging — ispLSI 2064A is Built on an Advanced 0.35 Micron E2CMOS® Technology Input Bus Output Routing Pool (ORP) GLB S B1 D Q EW A5 A4 A6 Input Bus B0 A7 N Output Routing Pool (ORP) 0139Bisp/2064 R Fu Description Input Bus FO • IN-SYSTEM PROGRAMMABLE D Q D Q A3 • HIGH PERFORMANCE E2CMOS® TECHNOLOGY Logic Array Output Routing Pool (ORP) A2 B3 B2 D Q D Input Bus Output Routing Pool (ORP) A1 B4 ES IG N Global Routing Pool (GRP) A0 — 2000 PLD Gates — 64 I/O Pins, Four Dedicated Inputs — 64 Registers — High Speed Global Interconnect — Wide Input Gating for Fast Counters, State Machines, Address Decoders, etc. — Small Logic Block Size for Random Logic B5 The ispLSI 2064 and 2064A are High Density Programmable Logic Devices. The devices contain 64 Registers, 64 Universal I/O pins, four Dedicated Input pins, three Dedicated Clock Input pins, two dedicated Global OE input pins and a Global Routing Pool (GRP). The GRP provides complete interconnectivity between all of these elements. The 2064 and 2064A feature 5V in-system programmability and in-system diagnostic capabilities. The ispLSI 2064 and 2064A offer non-volatile reprogrammability of the logic, as well as the interconnect, to provide truly reconfigurable systems. 64 E — In-System Programmable (ISP™) 5V Only — Increased Manufacturing Yields, Reduced Time-toMarket and Improved Product Quality — Reprogram Soldered Devices for Faster Prototyping 20 • OFFERS THE EASE OF USE AND FAST SYSTEM SPEED OF PLDs WITH THE DENSITY AND FLEXIBILITY OF FIELD PROGRAMMABLE GATE ARRAYS SI — Complete Programmable Device Can Combine Glue Logic and Structured Designs — Enhanced Pin Locking Capability — Three Dedicated Clock Input Pins — Synchronous and Asynchronous Clocks — Programmable Output Slew Rate Control to Minimize Switching Noise — Flexible Pin Placement — Optimized Global Routing Pool Provides Global Interconnectivity — Lead-Free Package Options U SE is pL The basic unit of logic on these devices is the Generic Logic Block (GLB). The GLBs are labeled A0, A1…B7 (Figure 1). There are a total of 16 GLBs in the ispLSI 2064 and 2064A devices. Each GLB is made up of four macrocells. Each GLB has 18 inputs, a programmable AND/OR/Exclusive OR array, and four outputs which can be configured to be either combinatorial or registered. Inputs to the GLB come from the GRP and dedicated inputs. All of the GLB outputs are brought back into the GRP so that they can be connected to the inputs of any GLB on the device. Copyright © 2006 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice. LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com 2064_10 1 August 2006 Select devices have been discontinued. See Ordering Information section for product status. • HIGH DENSITY PROGRAMMABLE LOGIC — fmax = 125 MHz Maximum Operating Frequency — tpd = 7.5 ns Propagation Delay — TTL Compatible Inputs and Outputs — Electrically Erasable and Reprogrammable — Non-Volatile — 100% Tested at Time of Manufacture — Unused Product Term Shutdown Saves Power B6 B7 Specifications ispLSI 2064/A Functional Block Diagram I/O 51 I/O 50 I/O 49 I/O 48 I/O 55 I/O 54 I/O 53 I/O 52 I/O 56 I/O 58 I/O 57 I/O 59 I/O 63 I/O 62 I/O 61 I/O 60 GOE 1 Generic Logic Blocks (GLBs) B4 B3 N FO A5 A6 I/O 28 I/O 29 I/O 30 I/O 31 I/O 24 I/O 25 I/O 26 I/O 27 I/O 20 I/O 21 I/O 22 I/O 23 I/O 18 I/O 19 Input Bus I/O 35 I/O 34 I/O 33 I/O 32 SDO/IN 2 0139B(1)isp/2064 pL SI 20 I/O 16 I/O 17 64 ispEN I/O 39 I/O 38 I/O 37 I/O 36 SCLK/IN 3 A7 Output Routing Pool (ORP) RESET Input Bus B0 E A4 B1 I/O 43 I/O 42 I/O 41 I/O 40 CLK 0 CLK 1 CLK 2 A3 B2 I/O 46 I/O 45 I/O 44 Y0 Y1 Y2 A2 SDI/IN 0 MODE/IN 1 EW Global Routing Pool (GRP) A1 R I/O 12 I/O 13 I/O 14 I/O 15 Output Routing Pool (ORP) A0 Input Bus I/O 9 I/O 10 I/O 11 B5 I/O 47 I/O 0 I/O 1 I/O 2 I/O 3 I/O 8 B6 The GRP has as its inputs, the outputs from all of the GLBs and all of the inputs from the bi-directional I/O cells. All of these signals are made available to the inputs of the GLBs. Delays through the GRP have been equalized to minimize timing skew. SE is The devices also have 64 I/O cells, each of which is directly connected to an I/O pin. Each I/O cell can be individually programmed to be a combinatorial input, output or bi-directional I/O pin with 3-state control. The signal levels are TTL compatible voltages and the output drivers can source 4 mA or sink 8 mA. Each output can be programmed independently for fast or slow output slew rate to minimize overall output switching noise. U Clocks in the ispLSI 2064 and 2064A devices are selected using the dedicated clock pins. Three dedicated clock pins (Y0, Y1, Y2) or an asynchronous clock can be selected on a GLB basis. The asynchronous or Product Term clock can be generated in any GLB for its own clock. Eight GLBs, 32 I/O cells, two dedicated inputs and two ORPs are connected together to make a Megablock (Figure 1). The outputs of the eight GLBs are connected to a set of 32 universal I/O cells by two ORPs. Each ispLSI 2064 and 2064A device contains two Megablocks. 2 Select devices have been discontinued. See Ordering Information section for product status. B7 D ES IG N Output Routing Pool (ORP) Megablock I/O 4 I/O 5 I/O 6 I/O 7 S Input Bus Output Routing Pool (ORP) GOE 0 Figure 1. ispLSI 2064/A Functional Block Diagram Specifications ispLSI 2064/A Absolute Maximum Ratings 1 Supply Voltage Vcc ................................................... -0.5 to +7.0V Input Voltage Applied .............................. -2.5 to VCC +1.0V Off-State Output Voltage Applied ........... -2.5 to VCC +1.0V D ES IG N Case Temp. with Power Applied .................... -55 to 125°C Max. Junction Temp. (TJ) with Power Applied ............ 150°C 1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional operation of the device at these or at any other conditions above those indicated in the operational sections of this specification is not implied (while programming, follow the programming specifications). EW DC Recommended Operating Condition Supply Voltage VIL VIH Input Low Voltage Commercial Industrial MAX. UNITS TA = 0°C to + 70°C 4.75 5.25 V TA = -40°C to + 85°C 4.5 5.5 V 0 0.8 V 2.0 Vcc+1 R VCC MIN. N PARAMETER SYMBOL FO Input High Voltage V Table 2 - 0005/2064 64 E Capacitance (TA=25°C, f=1.0 MHz) TYPICAL UNITS Dedicated Input Capacitance 8 pf VCC = 5.0V, VIN = 2.0V I/O Capacitance 9 pf VCC = 5.0V, VI/O = 2.0V 15 pf VCC = 5.0V, VY = 2.0V PARAMETER C1 C2 C3 20 SYMBOL SI Clock Capacitance TEST CONDITIONS pL Table 2-0006/2064 is Data Retention Specifications PARAMETER MINIMUM MAXIMUM UNITS 20 – Years 10000 – Cycles SE Data Retention Table 2-0008/2064 U Erase/Reprogram Cycles 3 Select devices have been discontinued. See Ordering Information section for product status. S Storage Temperature ..................................... -65 to 150°C Specifications ispLSI 2064/A Switching Test Conditions Figure 2. Test Load GND to 3.0V -125 Input Rise and Fall Time 10% to 90% Others ≤ 3 ns Input Timing Reference Levels 1.5V Output Timing Reference Levels 1.5V R1 Device Output D ES IG N See Figure 2 Output Load Conditions (see Figure 2) CL 470Ω 390Ω 35pF Active High ∞ 390Ω 35pF Active Low 470Ω 390Ω 35pF Active High to Z at VOH -0.5V ∞ 390Ω 5pF Active Low to Z at VOL +0.5V 470Ω 390Ω 5pF EW R2 A C *CL includes Test Fixture and Probe Capacitance. R1 N TEST CONDITION CL* R2 Table 2-0003/2064 3-state levels are measured 0.5V from steady-state active level. B Test Point FO R Table 2-0004/2064 DC Electrical Characteristics PARAMETER SYMBOL 20 CONDITION 3 MIN. TYP. IOL= 8 mA – – 0.4 V IOH = -4 mA 2.4 – – V MAX. UNITS -10 μA 0V ≤ VIN ≤ VIL (Max.) – – Input or I/O High Leakage Current 3.5V ≤ VIN ≤ VCC – – 10 μA ispEN Input Low Leakage Current 0V ≤ VIN ≤ VIL – – -150 μA I/O Active Pull-Up Current 0V ≤ VIN ≤ VIL – – -150 μA Output Short Circuit Current VCC = 5V, VOUT = 0.5V – – -200 mA VIL = 0.0V, VIH = 3.0V Commercial – 95 175 mA fCLOCK = 1 MHz Industrial – 95 – mA pL SI Input or I/O Low Leakage Current Operating Power Supply Current SE ICC2, 4 Output High Voltage is VOL VOH IIL IIH IIL-isp IIL-PU IOS1 Output Low Voltage 64 E Over Recommended Operating Conditions Table 2-0007/2064 U 1. One output at a time for a maximum duration of one second. VOUT = 0.5V was selected to avoid test problems by tester ground degradation. Characterized but not 100% tested. 2. Measured using four 16-bit counters. 3. Typical values are at VCC = 5V and TA= 25°C. 4. Maximum I CC varies widely with specific device configuration and operating frequency. Refer to the Power Consumption section of this data sheet and Thermal Management section of the Lattice Semiconductor Data Book or CD-ROM to estimate maximum I CC . 4 Select devices have been discontinued. See Ordering Information section for product status. Output Load + 5V ≤ 2 ns S Input Pulse Levels Specifications ispLSI 2064/A External Timing Parameters Over Recommended Operating Conditions 4 -80 MIN. MAX. MIN. MAX. MIN. MAX. UNITS 1 Data Propagation Delay, 4PT Bypass, ORP Bypass – 7.5 – 10.0 – 15.0 ns 2 Data Propagation Delay – 10.0 – 13.0 – 18.5 ns 3 S A A 3 Clock Frequency with Internal Feedback 125 – 100 – 81.0 – 4 Clock Frequency with External Feedback ( tsu2 + tco1) 100 – 77.0 – 57.0 – 5 Clock Frequency, Max. Toggle 125 – 111 – 100 5.0 – 6.5 – 9.0 – ns 4.0 – 5.0 – 6.5 ns – 0.0 – 0.0 – ns – 8.0 – 11.0 – ns 4.5 – 6.0 – 8.0 ns 1 – MHz – MHz – MHz D ES IG N A 6 GLB Reg. Setup Time before Clock, 4 PT Bypass 7 GLB Reg. Clock to Output Delay, ORP Bypass – – 8 GLB Reg. Hold Time after Clock, 4 PT Bypass 0.0 – 9 GLB Reg. Setup Time before Clock 6.0 – 10 GLB Reg. Clock to Output Delay – – 11 GLB Reg. Hold Time after Clock 0.0 – 0.0 – 0.0 – ns A 12 Ext. Reset Pin to Output Delay – 10.0 – 13.5 – 17.0 ns 5.0 – 6.5 – 10.0 – ns – 12.0 – 15.0 – 18.0 ns – 12.0 – 15.0 – 18.0 ns – 7.0 – 9.0 – 12.0 ns – 7.0 – 9.0 – 12.0 ns 13 Ext. Reset Pulse Duration 14 Product Term OE, Enable N – B EW – A 15 Product Term OE, Disable B 16 Global OE, Enable C 17 Global OE, Disable – 18 External Synchronous Clock Pulse Duration, High 4.0 – 4.5 – 5.0 – ns – 19 External Synchronous Clock Pulse Duration, Low 4.0 – 4.5 – 5.0 – ns R C 64 E Unless noted otherwise, all parameters use the GRP, 20 PTXOR path, ORP and Y0 clock. Refer to Timing Model in this data sheet for further details. Standard 16-bit counter using GRP feedback. Reference Switching Test Conditions section. U SE is pL SI 20 1. 2. 3. 4. -100 -125 DESCRIPTION1 5 Table 2 - 0030B/2064-130 Select devices have been discontinued. See Ordering Information section for product status. tpd1 tpd2 fmax fmax (Ext.) fmax (Tog.) tsu1 tco1 th1 tsu2 tco2 th2 tr1 trw1 tptoeen tptoedis tgoeen tgoedis twh twl TEST 2 # COND. FO PARAMETER Specifications ispLSI 2064/A Internal Timing Parameters1 Over Recommended Operating Conditions PARAMETER # 2 -125 DESCRIPTION -100 -80 UNITS MIN. MAX. MIN. MAX. MIN. MAX. Inputs ns – 2.6 ns 5.8 – 8.1 ns – 5.8 – 6.8 ns 5.7 – 6.8 – 8.0 ns – 6.0 – 7.3 – 8.8 ns – 6.5 – 8.0 – 9.8 ns – 0.5 – 0.5 – 1.3 ns 0.8 – 1.2 – 1.4 – ns 3.0 – 4.0 – 6.0 – ns – 0.2 – 0.3 – 0.4 ns – 0.5 – 21 Dedicated Input Delay – 1.5 – 2.2 – 22 GRP Delay – 1.3 – 1.7 23 4 Product Term Bypass Comb. Path Delay – 4.5 – 24 4 Product Term Bypass Reg. Path Delay – 5.0 25 1 Product Term/XOR Path Delay – 26 20 Product Term/XOR Path Delay EW D ES IG N 0.2 XOR Adjacent Path 28 GLB Register Bypass Delay 29 GLB Register Setup Time before Clock 30 GLB Register Hold Time after Clock 31 GLB Register Clock to Output Delay 32 GLB Register Reset to Output Delay – 1.1 – 1.3 – 1.6 ns 33 GLB Product Term Reset to Register Delay – 4.8 – 6.1 – 8.6 ns 34 GLB Product Term Output Enable to I/O Cell Delay – 7.3 – 8.6 – 9.0 ns 35 GLB Product Term Clock Delay 3.3 5.6 4.1 7.1 5.6 10.2 ns 36 ORP Delay – 0.8 – 1.4 – 2.0 ns – 0.3 – 0.4 – 0.5 ns Output Buffer Delay – 1.2 – 1.6 – 2.0 ns Output Slew Limited Delay Adder – 10.0 – 10.0 – 10.0 ns I/O Cell OE to Output Enabled – 3.2 – 4.2 – 4.6 ns I/O Cell OE to Output Disabled – 3.2 – 4.2 – 4.6 ns Global Output Enable – 3.8 – 4.8 – 7.4 ns Clock Delay, Y0 to Global GLB Clock Line (Ref. clock) 2.3 2.3 2.7 2.7 3.6 3.6 ns Clock Delay, Y1 or Y2 to Global GLB Clock Line 2.3 2.3 2.7 2.7 3.6 3.6 ns – 6.9 – 9.2 – 11.4 ns 20 E FO R N 27 64 Delay3 S 4.4 – pL SI ORP Bypass Delay is SE ns Input Buffer Delay 37 torpbp Outputs 38 tob 39 tsl 40 toen 41 todis 42 tgoe Clocks tgy0 43 tgy1/2 44 Global Reset 45 tgr U 1.8 20 Global Reset to GLB 1. Internal Timing Parameters are not tested and are for reference only. 2. Refer to Timing Model in this data sheet for further details. 3. The XOR adjacent path can only be used by hard macros. 6 Table 2- 0036C/2064-130 Select devices have been discontinued. See Ordering Information section for product status. tio tdin GRP tgrp GLB t4ptbp t4ptbp t1ptxor t20ptxor txoradj tgbp tgsu tgh tgco tgro tptre tptoe tptck ORP torp Specifications ispLSI 2064/A ispLSI 2064/A Timing Model I/O Cell GRP GLB ORP I/O Cell Feedback GRP Reg 4 PT Bypass GLB Reg Bypass ORP Bypass #20 #22 #24 #28 #37 20 PT XOR Delays GLB Reg Delay ORP Delay D #25, 26, 27 Q RST #45 Reset #29, 30, 31, 32 EW Control RE PTs OE #33, 34, CK 35 #43, 44 Y0,1,2 #42 R N GOE 0,1 FO Derivations of tsu, th and tco from the Product Term Clock 1 = = = 3.5 ns = Logic + Reg su - Clock (min) (tio + tgrp + t20ptxor) + (tgsu) - (tio + tgrp + tptck(min)) (#20 + #22 + #26) + (#29) - (#20 + #22 + #35) (0.2 + 1.3 + 6.0) + (0.8) - (0.2 + 1.3 + 3.3) th = = = 2.6 ns = Clock (max) + Reg h - Logic (tio + tgrp + tptck(max)) + (tgh) - (tio + tgrp + t20ptxor) (#20 + #22 + #35) + (#30) - (#20 + #22 + #26) (0.2 + 1.3 + 5.6) + (3.0) - (0.2 + 1.3 + 6.0) tco = = = 9.4 ns = Clock (max) + Reg co + Output (tio + tgrp + tptck(max)) + (tgco) + (torp + tob) (#20 + #22 + #35) + (#31) + (#36 + #38) (0.2 + 1.3 + 5.6) + (0.2) + (0.8 + 1.2) pL SI 20 64 E tsu Table 2- 0042A-2064 U SE is Note: Calculations are based upon timing specifications for the ispLSI 2064/A-125L. 7 #38, 39 I/O Pin (Output) #36 #40, 41 0491/2064 Select devices have been discontinued. See Ordering Information section for product status. I/O Delay D ES IG N I/O Pin (Input) Comb 4 PT Bypass #23 #21 S Ded. In Specifications ispLSI 2064/A Power Consumption used. Figure 4 shows the relationship between power and operating speed. Power consumption in the ispLSI 2064 and 2064A devices depends on two primary factors: the speed at which the device is operating and the number of Product Terms 140 130 110 100 EW ICC (mA) 120 90 N 80 1 20 40 60 80 100 120 140 R 70 D ES IG N ispLSI 2064/A 150 FO fmax (MHz) E Notes: Configuration of Four 16-bit Counters Typical Current at 5V, 25° C 64 ICC can be estimated for the ispLSI 2064/A using the following equation: ICC(mA) = 38 + (# of PTs * 0.33) + (# of nets * Max freq * 0.007) SI 20 Where: # of PTs = Number of Product Terms used in design # of nets = Number of Signals used in device Max freq = Highest Clock Frequency to the device (in MHz) is pL The ICC estimate is based on typical conditions (VCC = 5.0V, room temperature) and an assumption of two GLB loads on average exists. These values are for estimates only. Since the value of ICC is sensitive to operating conditions and the program in the device, the actual I CC should be verified. U SE 0127A/2064A 8 Select devices have been discontinued. See Ordering Information section for product status. 160 S Figure 4. Typical Device Power Consumption vs fmax Specifications ispLSI 2064/A Pin Description PLCC PIN NUMBERS NAME I/O 0 - I/O 3 I/O 4 - I/O 7 I/O 8 - I/O 11 I/O 12 - I/O 15 I/O 16 - I/O 19 I/O 20 - I/O 23 I/O 24 - I/O 27 I/O 28 - I/O 31 I/O 32 - I/O 35 I/O 36 - I/O 39 I/O 40 - I/O 43 I/O 44 - I/O 47 I/O 48 - I/O 51 I/O 52 - I/O 55 I/O 56 - I/O 59 I/O 60 - I/O 63 26, 30, 34, 38, 45, 49, 53, 57, 68, 72, 76, 80, 3, 7, 11, 15, 27, 31, 35, 39, 46, 50, 54, 58, 69, 73, 77, 81, 4, 8, 12, 16, 29, 33, 37, 41, 48, 52, 56, 60, 71, 75, 79, 83, 6, 10, 14, 18 GOE 0, GOE 1 67, 84 Y0, Y1, Y2 20, 66, RESET 24 Active Low (0) Reset pin which resets all registers in the device. ispEN 23 Input — Dedicated in-system programming enable pin. This pin is brought low to enable the programming mode. When low, the MODE, SDI, SDO and SCLK controls become active. SDI/ IN 02 25 Input — This pin performs two functions. When ispEN is logic low, it functions as an input pin to load programming data into the device. SDI/IN 0 also is used as one of the two control pins for the ISP state machine. When ispEN is high, it functions as a dedicated pin input. MODE/ IN 12 42 SDO/IN 22 44 SCLK/IN 32 61 EW D ES IG N S Input/Output Pins — These are the general purpose I/O pins used by the logic array. Global Output Enable input pins. 63 22, 21, 65 2, 19, 43, Input — This pin performs two functions. When ispEN is logic low, it functions as a pin to control the operation of the ISP state machine. When ispEN is high, it functions as a dedicated input pin. Output/Input — This pin performs two functions. When ispEN is logic low, it functions as an output pin to read serial shift register data. When ispEN is high, it functions as a dedicated input pin. Input — This pin performs two functions. When ispEN is logic low, it functions as a clock pin for the Serial Shift Register. When ispEN is high, it functions as a dedicated input pin. 64 Ground (GND) Vcc 62 No Connect SE is VCC 20 SI pL 1, GND NC1 64 E FO R N Dedicated Clock input. This clock input is connected to one of the clock inputs of all the GLBs in the device. U 1. NC pins are not to be connected to any active signals, VCC or GND. 2. Pins have dual function capability. 9 Table 2-0002A-08isp/2064 Select devices have been discontinued. See Ordering Information section for product status. 28, 32, 36, 40, 47, 51, 55, 59, 70, 74, 78, 82, 5, 9, 13, 17, DESCRIPTION Specifications ispLSI 2064/A Pin Description NAME 14 SDI/IN 02 16 MODE/IN 12 37 SDO/IN 22 39 SCLK/IN 32 60 pL S D ES IG N Input – Dedicated in-system programming enable input pin. This pin is brought low to enable the programming mode. The MODE, SDI, SDO and SCLK controls become active. Input – This pin performs two functions. When ispEN is logic low, it functions as an input pin to load programming data into the device. SDI/IN 0 also is used as one of the two control pins for the ISP state machine. When ispEN is high, it functions as a dedicated input pin. Input – This pin performs two functions. When ispEN is logic low, it functions as a pin to control the operation of the ISP state machine. When ispEN is high, it functions as a dedicated input pin. Output/Input – This pin performs two functions. When ispEN is logic low, it functions as an output pin to read serial shift register data. When ispEN is high, it functions as a dedicated input pin. Input – This pin performs two functions. When ispEN is logic low, it functions as a clock pin for the Serial Shift Register. When ispEN is high, it functions as a dedicated input pin. 13, 38, 12, 64 1, 25, 50, 74, 89, 2, 26, 51, 75, 99, 63, 88 Ground (GND) VCC 10, 27, 52, 76, 100 24, 49, 61, 77, No Connect. U SE NC1 is VCC EW ispEN N 15 Dedicated Clock input. This clock input is connected to one of the clock inputs of all of the GLBs on the device. Active Low (0) Reset pin which resets all of the registers in the device. 62 R RESET 65, Global Output Enable input pins. FO 11, Input/Output Pins - These are the general purpose I/O pins used by the logic array. 87 SI Y0, Y1, Y2 20, 28, 32, 36, 43, 47, 55, 59, 70, 78, 82, 86, 93, 97, 5, 9 E 66, 19, 23, 31, 35, 42, 46, 54, 58, 69, 73, 81, 85, 92, 96, 4, 8, 64 GOE 0, GOE 1 18, 22, 30, 34, 41, 45, 53, 57, 68, 72, 80, 84, 91, 95, 3, 7, 20 17, 21, 29, 33, 40, 44, 48, 56, 67, 71, 79, 83, 90, 94, 98, 6, 1. NC pins are not to be connected to any active signals, VCC or GND. 2. Pins have dual function capability. 10 Table 2-0002-2064b.eps Select devices have been discontinued. See Ordering Information section for product status. I/O 0 - I/O 3 I/O 4 - I/O 7 I/O 8 - I/O 11 I/O 12 - I/O 15 I/O 16 - I/O 19 I/O 20 - I/O 23 I/O 24 - I/O 27 I/O 28 - I/O 31 I/O 32 - I/O 35 I/O 36 - I/O 39 I/O 40 - I/O 43 I/O 44 - I/O 47 I/O 48 - I/O 51 I/O 52 - I/O 55 I/O 56 - I/O 59 I/O 60 - I/O 63 GND DESCRIPTION TQFP PIN NUMBERS Specifications ispLSI 2064/A Pin Configuration I/O 41 I/O 40 I/O 39 I/O 42 I/O 43 I/O 44 I/O 45 I/O 46 I/O 47 GOE 1 I/O 48 NC1 GND I/O 52 I/O 51 I/O 50 I/O 49 I/O 53 I/O 55 I/O 54 I/O 56 ispLSI 2064/A 84-Pin PLCC Pinout Diagram I/O 58 I/O 59 13 I/O 60 15 I/O 61 16 I/O 62 I/O 63 17 1NC 19 Y0 VCC GND 20 ispEN RESET 23 14 EW 18 26 I/O 2 28 I/O 3 29 I/O 4 I/O 5 I/O 6 30 I/O 34 69 I/O 33 68 I/O 32 GOE 0 Y2 62 61 NC1 SCLK/IN 32 60 I/O 31 59 I/O 30 58 I/O 29 57 I/O 28 56 I/O 27 55 I/O 26 I/O 25 N 63 R pL 32 70 Top View 20 31 I/O 35 64 64 27 71 65 FO I/O 0 I/O 1 72 I/O 37 I/O 36 66 E 25 73 ispLSI 2064/A 24 0 I/O 38 Y1 VCC GND 21 22 74 67 SI 2SDI/IN D ES IG N 12 54 U I/O 24 I/O 23 I/O 21 I/O 22 I/O 19 I/O 20 I/O 17 I/O 18 I/O 16 2 2SDO/IN 1 GND I/O 15 I/O 12 I/O 13 I/O 14 I/O 11 I/O 10 I/O 9 2MODE/IN SE is I/O 7 I/O 8 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 0123A/2064 1. NC pins are not to be connected to any active signals, VCC or GND. 2. Pins have dual function capability. 11 Select devices have been discontinued. See Ordering Information section for product status. I/O 57 S 11 10 9 8 7 6 5 4 3 2 1 84 83 82 81 80 79 78 77 76 75 Specifications ispLSI 2064/A Pin Configuration S D ES IG N EW E FO R Top View N ispLSI 2064/A 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 NC1 NC1 I/O 38 I/O 37 I/O 36 I/O 35 I/O 34 I/O 33 I/O 32 GOE 0 Y1 VCC GND Y2 NC1 SCLK/IN 32 I/O 31 I/O 30 I/O 29 I/O 28 I/O 27 I/O 26 I/O 25 NC1 NC1 I/O 7 I/O 8 I/O 9 I/O 10 I/O 11 I/O 12 I/O 13 I/O 14 I/O 15 2MODE/IN 1 GND 2SDO/IN 2 I/O 16 I/O 17 I/O 18 I/O 19 I/O 20 I/O 21 I/O 22 I/O 23 I/O 24 1NC 1NC is pL SI 1NC 1NC 20 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 I/O 57 I/O 58 I/O 59 I/O 60 I/O 61 I/O 62 I/O 63 1NC Y0 VCC GND ispEN RESET 2SDI/IN 0 I/O 0 I/O 1 I/O 2 I/O 3 I/O 4 I/O 5 I/O 6 1NC 1NC 64 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 1NC U SE 1. NC pins are not to be connected to any active signals, VCC or GND. 2. Pins have dual function capability. 12 0766A-2064-isp Select devices have been discontinued. See Ordering Information section for product status. 1NC 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 NC1 NC1 I/O 56 I/O 55 I/O 54 I/O 53 I/O 52 I/O 51 I/O 50 I/O 49 I/O 48 NC1 GND GOE 1 I/O 47 I/O 46 I/O 45 I/O 44 I/O 43 I/O 42 I/O 41 I/O 40 I/O 39 NC1 NC1 ispLSI 2064/A 100-Pin TQFP Pinout Diagram Specifications ispLSI 2064/A Part Number Description ispLSI XXXXX – XXX X X X Device Family 20641 2064A EW 1. Discontinued per PCN #02-06. Contact Rochester Electronics for available inventory. D ES IG N S Device Number Speed 125 = 125 MHz fmax 100 = 100 MHz fmax 80 = 81 MHz fmax ispLSI 2064/A Ordering Information N Conventional Packaging COMMERCIAL ispLSI tpd (ns) ORDERING NUMBER PACKAGE 125 7.5 ispLSI 2064A-125LJ84 84-Pin PLCC 125 7.5 100 10 100 10 81 15 81 15 FO E ispLSI 2064A-100LT100 100-Pin TQFP ispLSI 2064A-80LJ84 84-Pin PLCC ispLSI 2064A-80LT100 100-Pin TQFP ispLSI 100-Pin TQFP ispLSI 2064-100LJ1 84-Pin PLCC 10 ispLSI 2064-100LT1 100-Pin TQFP 15 ispLSI 2064-80LJ1 84-Pin PLCC 15 2064-80LT1 100-Pin TQFP SI 81 84-Pin PLCC 84-Pin PLCC 10 pL 81 ispLSI 2064A-100LJ84 2064-125LT1 7.5 100 100-Pin TQFP ispLSI 7.5 125 ispLSI 2064A-125LT100 2064-125LJ1 20 125 100 R fmax (MHz) 64 FAMILY ispLSI SE is 1. Discontinued per PCN #02-06. Contact Rochester Electronics for available inventory. U FAMILY ispLSI INDUSTRIAL fmax (MHz) tpd (ns) ORDERING NUMBER PACKAGE 81 15 ispLSI 2064A-80LJ84I 84-Pin PLCC 81 15 ispLSI 2064A-80LT100I 100-Pin TQFP 81 81 15 15 ispLSI 2064-80LJI1 84-Pin PLCC ispLSI 2064-80LTI1 100-Pin TQFP 1. Discontinued per PCN #02-06. Contact Rochester Electronics for available inventory. 13 Select devices have been discontinued. See Ordering Information section for product status. Grade Blank = Commercial I = Industrial Package J = PLCC T = TQFP JN = Lead-Free PLCC TN = Lead-Free TQFP Power L = Low Specifications ispLSI 2064/A ispLSI 2064/A Ordering Information (Cont.) Lead-Free Packaging COMMERCIAL fmax (MHz) PACKAGE 1 7.5 ispLSI 2064A-125LJN84 Lead-Free 84-Pin PLCC 125 7.5 ispLSI 2064A-125LTN100 Lead-Free 100-Pin TQFP 100 10 1 ispLSI 2064A-100LJN84 100 10 ispLSI 2064A-100LTN100 81 15 ispLSI 2064A-80LJN841 81 15 ispLSI 2064A-80LTN100 S 125 Lead-Free 84-Pin PLCC Lead-Free 100-Pin TQFP Lead-Free 84-Pin PLCC Lead-Free 100-Pin TQFP 1. 84-PLCC lead-free package is MSL4. Refer to “Handling Moisture Sensitive Packages” document on www.latticesemi.com. INDUSTRIAL fmax (MHz) ispLSI ORDERING NUMBER tpd (ns) PACKAGE 1 81 15 ispLSI 2064A-80LJN84I Lead-Free 84-Pin PLCC 81 15 ispLSI 2064A-80LTN100I Lead-Free 100-Pin TQFP EW FAMILY N 1. 84-PLCC lead-free package is MSL4. Refer to “Handling Moisture Sensitive Packages” document on www.latticesemi.com. R Revision History Version — 09 Previous Lattice release. August 2006 10 Updated for lead-free package options. U SE is pL SI 20 64 E FO Date 14 Change Summary Select devices have been discontinued. See Ordering Information section for product status. ispLSI ORDERING NUMBER tpd (ns) D ES IG N FAMILY