AXB030X43-SRZ

Data Sheet June 16, 2009 Austin LynxTM 24V:Non-isolated Power Modules: 18/20-30Vdc input; 3.0 to 6.0Vdc & 5.0 to 15.0Vdc Output; 30 & 50W RoHS Compliant Features Compliant to RoHS EU Directive 2002/95/EC (-Z versions) Compliant to ROHS EU Directive 20002/95/EC with lead solder exemption (non-Z versions) Wide input voltage range AXB030: AXB050: AXB030: AXB050: AXB030: AXB050: 18 to 30Vdc 20 to 30Vdc 3Vdc to 6Vdc 5Vdc to 15Vdc 91% at 3.3V full load 94% at 12Vdc full load Output voltage programmable via external resistor High efficiency modules (VIN = 24Vdc) Applications Distributed power architectures Intermediate bus voltage applications Telecommunications equipment Wireless Base stations Industrial equipment LANs/WANs Enterprise Networks Latest generation IC’s (DSP, FPGA, ASIC) and Microprocessor powered applications Low output ripple and noise Monotonic start-up into pre-bias output Remote On/Off (Positive logic) Remote Sense Small size and low profile: 33.0 mm x 13.5 mm x 8.28 mm (1.30 in x 0.53 in x 0.326 in) Constant switching frequency Wide operating temperature range (-40°C to 85°C) Over current and Over temperature protection (nonlatching) UL* 60950-1Recognized, CSA† C22.2 No. 60950-103 Certified, and VDE‡ 0805:2001-12 (EN60950-1) Licensed ISO** 9001 and ISO 14001 certified manufacturing facilities Description The Austin LynxTM 24V series SMT power modules are non-isolated DC-DC converters in an industry standard package that can deliver up to 48W of output power with a full load efficiency of 94% at 12Vdc output voltage (VIN = 24Vdc). These modules operate over a wide input voltage range (VIN = 18/20 – 30Vdc) and provide a precisely regulated output voltage from 3 to 6Vdc (AXB030) and 5 to 15Vdc (AXB050), programmable via an external resistor. Standard features include remote On/Off, adjustable output voltage, remote sense, over current and over temperature protection. * UL is a registered trademark of Underwriters Laboratories, Inc. † ‡ CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards Document No: DS05-032 ver.1.22 PDF name: lynx_24v_ds.pdf Data Sheet June 16, 2009 Austin LynxTM 24V: Non-isolated Power Modules: 18/20– 30Vdc input; 3.0 – 6.0Vdc & 5.0 – 15.0Vdc Output; 30& 50W Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Input Voltage Continuous Operating Ambient Temperature (see Thermal Considerations section) Storage Temperature All Tstg -55 125 °C All TA -40 85 °C Device All Symbol VIN Min -0.3 Max 36 Unit Vdc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Operating Input Voltage Maximum Input Current (VIN= 20V, VO= 12V, IO=IO, max) Input No Load Current (VIN = 24Vdc, Io = 0, module enabled) Input Stand-by Current (VIN = 24Vdc, module disabled) Inrush Transient Input Reflected Ripple Current, peak-to-peak (5Hz to 20MHz, 1μH source impedance; VIN=20V to 30V, IO= IOmax ; See Figure 25) Input Ripple Rejection (120Hz) Vo = 3.3Vdc Vo = 12Vdc Vo = 3.3Vdc Vo = 12Vdc All IIN,No Load IIN,No Load IIN,stand-by IIN,stand-by It 2 Device AXB030 AXB050 All Symbol VIN VIN IIN,max Min 18.0 20.0 Typ 24.0 24.0 Max 30.0 30.0 3.5 Unit Vdc Vdc Adc 60 110 3 3 1 mAdc mAdc mA mA 2 As All All 50 50 mAp-p dB CAUTION: These power modules can be used in a wide variety of applications ranging from simple standalone operation to an integrated part of sophisticated power architectures. To preserve maximum flexibility, no internal fuse has been provided. Also, extensive safety testing has shown that no external fuse is required to protect the unit. However, it is still recommended that some type of current-limiting power source be used to protect the module and evaluated in the end-use equipment. LINEAGE POWER 2 Data Sheet June 16, 2009 Austin LynxTM 24V: Non-isolated Power Modules: 18/20– 30Vdc input; 3.0 – 6.0Vdc & 5.0 – 15.0Vdc Output; 30& 50W Electrical Specifications (continued) Parameter Output Voltage Set-point (VIN=VN, min, IO=IO, max, TA=25°C) Output Voltage (Over all operating input voltage, resistive load, and temperature conditions until end of life) Adjustment Range Selected by an external resistor Output Regulation Line (VIN=VIN, min to VIN, max) Load (IO=IO, min to IO, max) Temperature (Tref=TA, min to TA, max) Output Ripple and Noise on nominal output (VIN=VIN, nom and IO=IO, min to IO, max Cout =0.01μF ceramic//10μFtantalum capacitors) Peak-to-Peak (5Hz to 20MHz bandwidth) Peak-to-Peak (5Hz to 20MHz bandwidth) External Capacitance ESR ≥ 1 mΩ ESR ≥ 10 mΩ ESR ≥ 1 mΩ ESR ≥ 10 mΩ Output Current (VIN = VIN, nom) Vo = 3.3Vdc Vo = 5.0Vdc Output Power (VIN = VIN, nom) Vo =Vo,,min to Vo,,max Output Short-Circuit Current (VO≤250mV) ( Hiccup Mode ) Efficiency VIN= VIN, nom, TA=25°C IO=IO, max , VO= VO,set Switching Frequency (Fixed) AXB030 AXB050 AXB030 AXB050 AXB030 AXB050 VO,set = 3.3Vdc VO,set = 5.0Vdc VO,set = 12.0Vdc VO,set = 15.0Vdc All Io Io Po Po IO, s/c IO, s/c η η η η fsw ⎯ ⎯ ⎯ 15 20 90 93 95 96 300 ⎯ 0 0 10 8.0 33 50 ⎯ ⎯ Adc Adc W W Adc Adc % % % % kHz AXB030 AXB030 AXB050 AXB050 CO, max CO, max CO, max CO, max 0 0 0 0 ⎯ ⎯ ⎯ ⎯ 1,000 3,000 1,000 2,000 μF μF μF μF AXB030 AXB050 ⎯ ⎯ 50 100 75 200 mVpk-pk mVpk-pk All All All ⎯ ⎯ ⎯ ⎯ ⎯ 0.5 0.4 0.4 1 % VO, set % VO, set % VO, set AXB030 AXB050 VO VO 3.0 5.0 6.0 15.0 Vdc Vdc All VO, set -3% ⎯ +3% % VO, set Device All Symbol VO, set Min -2.0 Typ VO, set Max +2.0 Unit % VO, set LINEAGE POWER 3 Data Sheet June 16, 2009 Austin LynxTM 24V: Non-isolated Power Modules: 18/20– 30Vdc input; 3.0 – 6.0Vdc & 5.0 – 15.0Vdc Output; 30& 50W Electrical Specifications (continued) Parameter Dynamic Load Response (dIO/dt=5A/μs; VIN=VIN, nom TA=25°C) Load Change from Io= 50% to 100% of IO,max; No external output capacitors Peak Deviation (Vo = 3.3Vdc) Peak Deviation (Vo = 12Vdc) Settling Time (VO