LTD-4608BE-07

LED Display Product Data Sheet LTD-4608BE-07J Spec No.: DS30-2004-319 Effective Date: 12/16/2004 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES ＊0.4 inch (10 mm ) DIGIT HEIGHT ＊EXCELLENT SEGMENT UNIFORMITY ＊LOW POWER REQUIREMENT ＊HIGH BRIGHTNESS AND HIGH CONTRAST ＊WIDE VIEWING ANGLE ＊SOLID STATE RELIABILITY ＊BINNED FOR LUMINOUS INTENSITY ＊LEAD-FREE PACKAGE DESCRIPTION The LTD-4608BE-07J is a 0.4 inch (10 mm) digit height dual-digit display. This device uses RED ORANGE LED chips (GaAsP epi on GaP substrate). The display has gray face and white segments. DEVICE PART NO. RED ORANGE LTD-4608BE-07J PART NO.: LTD-4608BE-07J BNS-OD-C131/A4 DESCRIPTION Duplex Common Anode Rt. Hand Decimal PAGE: 1 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are  0.25mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM PART NO.: LTD-4608BE-07J BNS-OD-C131/A4 PAGE: 2 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PIN CONNECTION No PART NO.: LTD-4608BE-07J BNS-OD-C131/A4 CONNECTION 1 Cathode C 2 Cathode D.P. 3 Cathode E 4 Common Anode (Digit 2) 5 Cathode D 6 Cathode F 7 Cathode G 8 Cathode B 9 Common Anode (Digit 1) 10 Cathode A PAGE: 3 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING PARAMETER MAXIMUM RATING UNIT 75 mW 100* mA 25 mA 0.28 mA/0C 5 V Power Dissipation Per Segment Peak Forward Current Per Segment ( Frequency 1Khz, 10% duty cycle) Continuous Forward Current Per Segment 0 Forward Current Derating from 25 C Reverse Voltage Per Segment Operating Temperature Range -350C to +1050C Storage Temperature Range -350C to +1050C Soldering Conditions : 1/16 inch below seating plane for 3 seconds at 2600C * see figure 5 to establish pulsed condition ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN TYP MAX UNIT TEST CONDITION 2200 cd IF = 10mA p 630 nm IF = 20mA Spectral Line Half-Width  40 nm IF = 20mA Dominant Wavelength d 621 nm IF = 20mA Forward Voltage Per Segment VF 2.0 2.6 V IF = 20mA Reverse Current Per Segment IR 100 A VR = 5V IV-m 2:1 Average Luminous Intensity Per Segment IV Peak Emission Wavelength Luminous Intensity Matching Ratio 800 IF = 10mA Note: Luminous Intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. PART NO.: LTD-4608BE-07J BNS-OD-C131/A4 PAGE: 4 of 5 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTD-4608BE-07J BNS-OD-C131/A4 PAGE: 5 of 5