LTS-4301Y

LED Display Product Data Sheet LTS-4301Y Spec No.: DS-30-96-260 Effective Date: 02/13/2014 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LED DISPLAY LTS-4301Y LED DISPLAY LTS-4301Y Rev Description By Date 01 Preliminary SPEC Koko Hsu 05-Apr-2000 Above data for PD and Customer tracking only - Release NPPR Koko Hsu 05-Apr-2000 Anon B 21-Jan-2013 - Correct Peak Emission Wavelength A - Update Operating/Storage Temperature Range from -35°C to +85°C to -35°C to +105°C 1/6 Part No. : LTS-4301Y BNS-OD-FC002/A4 LED DISPLAY LTS-4301Y 1. Description The LTS-4301Y is a 0.4 inch (10.0 mm) digit height single digit even-segment display. This device utilizes yellow LED chips, which are made from GaAsP on a transparent GaP substrate, and has a gray face and white segments. 1.1 Features          0.40 inch (10.0 mm) DIGIT HEIGHT CONTINUOUS UNIFORM SEGMENTS LOW POWER REQUIREMENT EXCELLENT CHARACTERS APPEARANCE HIGH BRIGHTNESS & HIGH CONTRAST WIDE VIEWING ANGLE SOLID STATE RELIABILITY CATEGORIZED FOR LUMINOUS INTENSITY LEAD-FREE PACKAGE(ACCORDING TO ROHS) 1.2 Device Part No YELLOW LTS-4301Y Description Common Anode Rt. Hand Decimal 2/6 Part No. : LTS-4301Y BNS-OD-FC002/A4 LED DISPLAY LTS-4301Y 2. Package Dimensions Notes : 1. All dimensions are in millimeters. Tolerances are  0.25mm (0.01“) unless otherwise noted. 2. Foreign materials on segment ≦10mils 3. Bubble in segment ≦10mils 4. Bending≦1% of reflector length 5. Ink contamination (surface) ≦20mils 6. Pin tip’s shift tolerance is  0.4 mm. 3/6 Part No. : LTS-4301Y BNS-OD-FC002/A4 LED DISPLAY LTS-4301Y 3. Internal Circuit Diagram 4. Pin Connection No. CONNECTION 1 ANODE G 2 ANODE F 3 COMMON CATHODE 4 ANODE E 5 ANODE D 6 7 8 ANODE D.P. ANODE COMMON C CATHODE 9 ANODE B 10 ANODE A 4/6 Part No. : LTS-4301Y BNS-OD-FC002/A4 LED DISPLAY LTS-4301Y 5. Rating and Characteristics 5.1. Absolute Maximum Rating at Ta=25°C Parameter Maximum Rating Unit 60 mW 80 mA 20 mA 0.22 mA/°C Power Dissipation Per Segment Peak Forward Current Per Segment ( 1/10 Duty Cycle, 0.1ms Pulse Width ) Continuous Forward Current Per Segment Derating Linear From 25°C Per Segment Operating Temperature Range -35°C to +105°C Storage Temperature Range -35°C to +105°C Solder Conditions: 1/16 inch below seating plane for 3 seconds at 260℃., or temperature of unit (during assembly) not over max. temperature rating above 5.2.Electrical / Optical Characteristics at Ta=25°C Parameter Symbol MIN. TYP. Average Luminous Intensity IV 800 Peak Emission Wavelength Unit Test Condition 2200 ucd IF=10mA p 585 nm IF=20mA Spectral Line Half-Width  35 nm IF=20mA Dominant Wavelength d 588 nm IF=20mA VF 2.10 2.60 V IF=20mA IR 100 A VR=5V IV-m 2:1 Forward Voltage Per Chip Reverse Current Per Segment (*2) Luminous Intensity Matching Ratio MAX. IF=10mA (Similar Light Area) Notes : 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commission International De L’Eclariage) eye-response curve 2. Reverse voltage is only for IR test. It cannot continue to operate at this situation 3. Cross talk specification < 1.0% 5/6 Part No. : LTS-4301Y BNS-OD-FC002/A4 LED DISPLAY LTS-4301Y 6. Typical Electrical / Optical Characteristics Curves o (25 C Ambient Temperature Unless Otherwise Noted) 6/6 Part No. : LTS-4301Y BNS-OD-FC002/A4