LTS-5501AE-09J

LED Display Product Data Sheet LTS-5501AE-09J Spec No.: DS30-2010-0171 Effective Date: 10/13/2012 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LED DISPLAY LTS-5501AE-09J DATA SHEET ITEM 1 2 DESCRIPTION New Delete Reverse Voltage Per Dice at absolute maximum rating. Add Reverse voltage remark at electrical/ optical characteristics. PART NO.: LTS-5501AE-09J ISSUER Lester Chen DATE 2010/06/01 Eason Lin 2010/08/05 PAGE: 1 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES ＊0.56inch (14.22mm ) DIGIT HEIGHT ＊CONTINUOUS UNIFORM SEGMENTS ＊LOW POWER REQUIREMENT ＊EXCELLENT CHARACTERS APPEARANCE ＊HIGH BRIGHTNESS AND HIGH CONTRAST ＊WIDE VIEWING ANGLE ＊SOLID STATE RELIABILITY ＊CATEGORIZED FOR LUMINOUS INTENSITY ＊LEAD-FREE PACKAGE (ACCORDING TO RoHS) DESCRIPTION The LTS-5501AE-09J is a 0.56 inch (14.22 mm) digit height single digit display. This device utilizes red orange LED chips which are made from GaAsP on GaP substrate, and has a gray face and white segments. DEVICE PART NO. DESCRIPTION Red Orange Common Anode Rt. Hand Decimal LTS-5501AE-09J PART NO.: LTS-5501AE-09J PAGE: 2 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS NOTES: 1.All dimensions are in millimeters. Tolerances are 0.25 mm (0.01“) unless otherwise noted. 2. Pin tip’s shift tolerance is + 0.4 mm PART NO.: LTS-5501AE-09J PAGE: 3 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only INTERNAL CIRCUIT DIAGRAM PIN CONNECTION No PART NO.: LTS-5501AE-09J CONNECTION 1 CATHODE E 2 CATHODE D 3 COMMON ANODE 4 CATHODE C 5 CATHODE D.P. 6 CATHODE B 7 CATHODE A 8 COMMON ANODE 9 CATHODE F 10 CATHODE G PAGE: 4 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 75 mW Peak Forward Current Per Segment ( Frequency 1Khz, 10% duty cycle) 100 mA Continuous Forward Current Per Segment Derating Linear From 250C Per Segment 25 0.28 mA mA/0C Operating Temperature Range -350C to +1050C Storage Temperature Range -350C to +1050C Soldering Conditions : 1/16 inch below seating plane for 5 seconds at 2600C ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN TYP MAX UNIT TEST CONDITION Average Luminous Intensity Per Segment IV 800 2400 cd IF = 10mA Peak Emission Wavelength p 630 nm IF = 20mA Spectral Line Half-Width  40 nm IF = 20mA Dominant Wavelength d 621 nm IF = 20mA VF 2.0 2.6 V IF = 20mA IR 100 A VR = 5V IV-m 2:1 Forward Voltage Per Segment Reverse Current Per Segment (2) Luminous Intensity Matching Ratio (Similar Light Area) IF = 10mA BIN TABLE ucd/seg-10mA Bin Grade H Range 801~1300 J 1301~2100 K L M 2101~3400 3401~5400 5401~8600 Note: 1. Luminous Intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. 2. Reverse voltage is only for IR test. It can not continue to operate at this situation. PART NO.: LTS-5501AE-09J PAGE: 5 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTS-5501AE-09J PAGE: 6 of 7 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKING SPEC. PART NO.: LTS-5501AE-09J PAGE: 7 of 7