LTV-354T-B

LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only FEATURES * Current transfer ratio ( CTR : MIN. 20% at IF = ±1mA, VCE = 5V ) * Isolation voltage between input and output LTV-354T ( Viso = 3,750Vrms ) * Mini-flat package : 2.0mm profile : LTV-354T * UL, CUL, CSA, FIMKO, NEMKO, DEMKO, SEMKO approved * RoHS compliance APPLICATIONS * Hybrid substrates that require high density mounting. * Programmable controllers * System appliance, measuring instruments Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 1 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only OUTLINE DIMENSIONS LTV-354T : *1. 3-digit date code. *2. Factory identification mark shall be marked (W: China-CJ, X: China-TJ, Y: Thailand). *3. Rank shall be or shall not be marked. Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 2 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only TAPING DIMENSIONS Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 12  0.3 ( .47 ) 4  0.1 ( .15 ) 5.5  0.1 ( .217 ) 2  0.1 ( .079 ) 8  0.1 ( .315 ) Page : 3 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25C ) PARAMETER SYMBOL RATING UNIT Forward Current IF 50 mA Power Dissipation P 70 mW Collector - Emitter Voltage VCEO 35 V Emitter - Collector Voltage VECO 6 V Collector Current IC 50 mA Collector Power Dissipation PC 150 mW Ptot 170 mW Viso 3,750 Vrms Operating Temperature Topr -30~ +110 C Storage Temperature Tstg -55 ~ +150 C Tsol 260 C INPUT OUTPUT Total Power Dissipation *1 Isolation Voltage *2 Soldering Temperature *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector and emitter on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 4 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25C ) PARAMETER SYMBOL MIN. TYP. MAX. UNIT CONDITIONS Forward Voltage VF — 1.2 1.4 V IF=20mA Terminal Capacitance Ct — 30 250 pF V=0, f=1KHz Collector Dark Current ICEO — — 100 nA VCE=20V, IF=0 Collector-Emitter Breakdown Voltage BVCEO 35 — — V IC=0.1mA IF=0 Emitter-Collector Breakdown Voltage BVECO 6 — — V IE=10A IF=0 IC 0.2 — 4 mA *1 Current Transfer Ratio CTR 20 — 400 % Collector-Emitter Saturation Voltage VCE(sat) — 0.1 0.2 V IF=20mA IC=1mA Isolation Resistance Riso —  DC500V 40 ~ 60% R.H. Floating Capacitance Cf — 0.6 1 pF V=0, f=1MHz Response Time (Rise) tr — 4 18 s Response Time (Fall) tf — 3 18 s INPUT OUTPUT Collector Current TRANSFER CHARACTERISTICS *1 CTR  51010 11011 IF=1mA VCE=5V VCE=2V, IC=2mA RL=100 IC  100% IF Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 5 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. RANK MARK CTR ( % ) A 50 ~ 150 A or No mark 20 ~ 400 LTV-354T IF = 1 mA CONDITIONS VCE = 5 V Ta = 25 C Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 6 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only CHARACTERISTICS CURVES Fig.1 Forward Current vs. Ambient Temperature Fig.2 Collector Power Dissipation vs. Ambient Temperature Collector power dissipation Pc (mW) 60 Forward current I F(mA) 50 40 30 20 10 0 -55 0 25 50 75 100 200 150 100 50 0 -55 125 0 o 7mA 1mA 3mA 5mA 1 Ta=75 oC 50 C 200 o 50 20 10 5 2 0 5 10 1 15 0 0.5 200 50 IF=30mA o Collector current Ic (mA) 160 1.5 2.0 2.5 3.0 Fig.6 Collector Current vs. Collector-emitter Voltage VCE=5V Ta=25 C 180 1.0 Forward voltage VF(V) Fig.5 Current Transfer Ratio vs. Forward Current Current transfer ratio CTR (%) 25o C 0C o -25 C 100 Forward current IF(mA) 140 120 100 80 60 40 o Ta=25 C 25mA 40 20mA 30 15mA Pc(MAX.) 20 10mA 10 5mA 20 1 2 5 10 20 50 Forward current IF(mA) Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 125 o 2 0 100 500 O Ta=25 C 3 0 75 Fig.4 Forward Current vs. Forward Voltage Forward current I F(mA) 4 Ic=0.5mA Collecotr-emitter saturation voltage VCE (sat) (V) 5 50 Ambient temperature Ta ( C) Fig.3 Collector-emitter Saturation Voltage vs. Forward Current 6 25 o Ambient temperature Ta ( C) 0 0 1 2 3 4 5 6 7 8 9 Collector-emitter voltage VCE(V) Page : 7 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only CHARACTERISTICS CURVES Relative current transfer ratio (%) 150 Fig.8 Collector-emitter Saturation Voltage vs. Ambient Temperature IF=1mA, VCE=5V 100 50 0 20 40 60 80 100 0.10 Collector-emitter saturation voltage VCE (sat) (V) Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature IF=20mA IC=1mA 0.08 0.06 0.04 0.02 0 120 20 40 Collector dark current I CEO (nA) 10000 100 120 Fig.10 Response Time vs. Load Resistance 500 VCE=20V 200 100 Response time ( s) 1000 100 10 VCE=2V IC=2mA Ta=25 C o 50 tr 20 10 td tf 5 ts 2 1 0.5 1 20 40 60 80 100 0.2 0.05 120 o 0.1 0.2 0.5 1 2 5 Fig.11 Frequency Response Test Circuit for Response Time VCE=2V IC=2mA Ta=25 C 0 o Vcc Input RD RL Input Output Output 10% 90% ts td 100 10 RL=10k 10 Load resistance R L (k ) Ambient temperature Ta ( C) Voltage gain Av (dB) 80 o Ambient temperature Ta ( C) Fig.9 Collector Dark Current vs. Ambient Temperature 60 Ambient temperature Ta ( C) o tr 1k tf Test Circuit for Frequency Response Vcc 20 0.5 1 RD 2 5 10 20 50 100 RL Output 500 Frequency f (kHz) Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 8 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only TEMPERATURE PROFILE OF SOLDERING REFLOW (1) IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Profile item Conditions Preheat - Temperature Min (TSmin) - Temperature Max (TSmax) - Time (min to max) (ts) 150˚C 200˚C 90±30 sec Soldering zone - Temperature (TL) - Time (tL) Peak Temperature (TP) Ramp-up rate Ramp-down rate 217˚C 60 sec 260˚C 3˚C / sec max. 3~6˚C / sec 20 sec Temperature ( C) Ramp-up TP 260 C TL 217 C Tsmax 200 C Ramp-down 60 sec Tsmin 150 C tL (Soldering) 25 C 60 ~ 120 sec ts (Preheat) Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 35~70 sec Time (sec) Page : 9 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only TEMPERATURE PROFILE OF SOLDERING REFLOW (2) Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec. (3) Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max. Part No. :LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 10 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only RECOMMENDED FOOT PRINT PATTERNS (MOUNT PAD) Unit : mm Part No. :LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 11 of 12 LITE-ON TECHNOLOGY CORPORA TION Property of LITE-ON Only TEMPERATURE PROFILE OF SOLDERING REFLOW - Lite-On is continually improving the quality, reliability, function or design and Lite-On reserves the right to make changes without further notices. - The products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - For equipment/devices where high reliability or safety is required, such as space applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. - When requiring a device for any ”specific” application, please contact our sales in advice. - If there are any questions about the contents of this publication, please contact us at your convenience. - The contents described herein are subject to change without prior notice. - Immerge unit’s body in solder paste is not recommended. Part No. : LTV-354T Series (Rev. - August 5, 2013) BNS-OD-C131/A4 Page : 12 of 12