LTV702V-V

L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only FEATURES 1. This specification shall be applied to photocoupler. Model No. LTV-817 as an option. 2. Applicable Models (Business dealing name) * Dual-in-line package : LTV702V-V * Wide lead spacing package : LTV702VM-V * Surface mounting package : LTV702VS-V * Tape and reel packaging : LTV702VSTA1-V 3. The relevant models are the models Approved by VDE according to DIN VDE 0884:1992-06 Approved Model No.: LTV-702V / LTV-702VM / LTV-702VS VDE approved No.: 094722 (According to the specification DIN VDE 0884:1992-06) * Operating isolation voltage VIORM : 700V (Peak) * Transient voltage VTR : 6000V (Peak) * Pollution : 2 (According to VDE 0110-1 : 1997-04) * Clearances distance (Between input and output) : 7.0mm (MIN.) * Creepage distance (Between input and output) : 7.0mm (MIN.) * Isolation thickness between input and output : 0.4mm (MIN.) * Safety limit values Current (Isi) : 400mA (Diode side) Power (Psi) : 700mW (Phototransistor side) Temperature(Tsi) : 175oC In order to keep safety electric isolation of photocoupler, please set the protective circuit to keep within safety limit values when the actual application equipment troubled. * Indication of VDE 0884 approval prints " " on sleeve package. Part No. : LTV702V ( M, S, STA1 )-V BNS-OD-C131/A4 Page : 1 of 12 L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV702V-V : LTV702VM-V : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Page : 2 of 12 Part No. : LTV702V ( M, S, STA1 )-V BNS-OD-C131/A4 L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only OUTLINE DIMENSIONS LTV702VS-V : *1. *2. *3. *4. Year date code. 2-digit work week. Factory identification mark shall be marked (Z : Taiwan, Y : Thailand, X : China). Rank shall be or shall not be marked. Part No. : LTV702V ( M, S, STA1 )-V BNS-OD-C131/A4 Page : 3 of 12 L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only TAPING DIMENSIONS LTV702VSTA1-V : Description Tape wide Pitch of sprocket holes Distance of compartment Distance of compartment to compartment Symbol W P0 F P2 P1 Dimensions in mm ( inches ) 16 ± 0.3 ( .63 ) 4 ± 0.1 ( .15 ) 7.5 ± 0.1 ( .295 ) 2 ± 0.1 ( .079 ) 12 ± 0.1 ( .472 ) Part No. : LTV702V ( M, S, STA1 )-V BNS-OD-C131/A4 Page : 4 of 12 L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ABSOLUTE MAXIMUM RATING ( Ta = 25°C ) PARAMETER Forward Current INPUT Reverse Voltage Power Dissipation Collector - Emitter Voltage Emitter - Collector Voltage Collector - Base Voltage OUTPUT Emitter - Base Voltage Collector Current Collector Power Dissipation Total Power Dissipation *1 Isolation Voltage Operating Temperature Storage Temperature *2 Soldering Temperature VEBO IC PC Ptot Viso Topr Tstg Tsol 6 50 160 200 5,000 -55 ~ +100 -55 ~ +150 260 V mA mW mW Vrms °C °C °C SYMBOL IF VR P VCEO VECO VCBO RATING 60 6 105 70 6 70 UNIT mA V mW V V V *1. AC For 1 Minute, R.H. = 40 ~ 60% Isolation voltage shall be measured using the following method. (1) Short between anode and cathode on the primary side and between collector, emitter and base on the secondary side. (2) The isolation voltage tester with zero-cross circuit shall be used. (3) The waveform of applied voltage shall be a sine wave. *2. For 10 Seconds Part No. : LTV702V ( M, S, STA1 )-V BNS-OD-C131/A4 Page : 5 of 12 L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ELECTRICAL - OPTICAL CHARACTERISTICS ( Ta = 25°C ) PARAMETER Forward Voltage INPUT Reverse Current Terminal Capacitance Collector Dark Current Collector-Emitter Breakdown Voltage OUTPUT Emitter-Collector Breakdown Voltage Collector-Base Breakdown Voltage Collector Current * Current Transfer Ratio Collector-Emitter Saturation Voltage Isolation Resistance Floating Capacitance Cut-Off Frequency Response Time (Rise) Response Time (Fall) SYMBOL MIN. TYP. MAX. UNIT VF IR Ct ICEO BVCEO — — — — 70 1.4 — 30 — — 1.7 10 250 50 — V µA pF nA V CONDITIONS IF=60mA VR=6V V=0, f=1KHz VCE=10V, IF=0 IC=0.1mA IF=0 IE=10µA IF=0 IC=0.1mA IF=0 IF=10mA VCE=5V IF=10mA IC=2.5mA DC500V 40 ~ 60% R.H. V=0, f=1MHz VCC=5V, IF=10mA RL=75Ω,-3dB VCC=5V, IF=10mA RL=75Ω BVECO 6 — — V BVCBO IC CTR VCE(sat) 70 4 40 — — — — 0.25 — 32 320 0.4 V mA % V Ω pF kHz µs µs TRANSFER CHARACTERISTICS Riso Cf fc tr tf 5×1010 1×1011 — — — — 0.6 150 2 2 — 1 — 7 8 * CTR = IC × 100% IF Part No. : LTV702V ( M, S, STA1 )-V BNS-OD-C131/A4 Page : 6 of 12 L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only RANK TABLE OF CURRENT TRANSFER RATIO CTR MODEL NO. RANK MARK A B CTR ( % ) 40 ~ 80 63 ~ 125 100 ~ 200 160 ~ 320 40 ~ 320 LTV702V-V C D A or B or C or D or No mark IF = 10 mA CONDITIONS VCE = 5 V Ta = 25 °C Part No. : LTV702V ( M, S, STA1 )-V BNS-OD-C131/A4 Page : 7 of 12 L ITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only ISOLATION SPECIFICATION ACCORDING TO VDE 0884 Parameter Class of environmental test Pollution Maximum Operating Isolation Voltage Partial Discharge Test Diagram 1 Voltage (Between Input and Output) Diagram 2 Maximum Over-voltage Safety Maximum Ratings 1) Case Temperature 2) Input Current 3) Electric Power (Output or Total Power Issipation) Symbol VIORM Conditions DIN IEC68 DIN VDE0110 tp=60s, qc