06623.15

Axial Lead and Cartridge Fuses Subminiature RoHS LT-5™ Fast-Acting Fuse 662 Series Time 1 hour, Minimum 30 minutes, Maximum .010 sec Min.; 3 sec Max .003 sec Min.; .030 sec Max .020 sec Maximum ® D V E ® ELECTRICAL CHARACTERISTICS: % of Ampere Rating 150% 210% 275% 400% 1000% AGENCY APPROVALS: IEC 60127-3/1: VDE and Semko approved 50 mA through 3.15 A. Recognized under the Components Program Underwriters Laboratories and CSA accepted 40mA through 5A. INTERRUPTING RATINGS: 35A or 10X rated current; whichever is greater. 8.5(.335") 8.5(.335") 8.45 (.333") Operating Temperature: -40˚C to +85˚C. Case Resistance: Min 100 Mohms, according to EIA/IS-722, 4.7 Vibration: 20gn, 20 min, 10Hz to 2,000Hz, 12 cycles according to EIA/IS-722, 4.10 (Frequency range 10-2000Hz, cross-over frequency 60 Hz according to IEC 60068-2-6, test Fc) Mechanical Shock: 50g, half sine wave, 11ms, 3 times each direction according to IEC 60068-2-27. Resistance to Cleaning Solvents: Clean according to EIA/IS-722, 4.11 Resistance to Soldering Heat: 10 sec. At 260˚C to IEC 60068-2-20, test Tb Terminal Strength: Tensile load min. 9N, according to EIA/IS-722, 4.5.5 18.8(.740") 0.57 (.012") 4.3(.169") 0.64 (.025") 5.08 (.200") 0.64 (.025") 5.08 (.200") PHYSICAL SPECIFICATIONS: Materials: Temperature Resistant Body, UL 94V-0; Sn Coated Copper Wire Terminals. Solderability: IEC 60068-2-20, test Ta Soldering Parameters: Wave Solder – 235˚C, 2 seconds maximum. ORDERING INFORMATION: Catalog Number 0662.040 0662.050 0662.063 0662.080 0662.100 0662.125 0662.160 0662.200 0662.250 0662.315 0662.400 0662.500 0662.630 0662.800 0662 001. 0662 1.25 0662 01.6 0662 002. 0662 02.5 0662 3.15 0662 004. 0662 005. Ampere Rating .040 .050 .063 .080 .100 .125 .160 .200 .250 .315 .400 .500 .630 .800 1.00 1.25 1.60 2.00 2.50 3.15 4.00 5.00 Voltage Rating 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 Nominal Resistance Cold mOhms 7500 4483 3866 2545 2010 1346 2960 2256 1460 1209 180 128 96 78 64 45 37 29 24 17 13 10 Nominal Melting I2t A2 Sec 0.00016 0.00040 0.001 0.001 0.002 0.006 0.014 0.024 0.058 0.104 0.044 0.090 0.150 0.220 0.330 0.680 0.940 1.33 1.94 5.40 7.90 11.19 PACKAGING: Please refer to the following suffixes when ordering: • 100 Piece Bulk: Short Leads use suffix HXSL; Long Leads use suffix HXLL • 750 Piece Tape and Reel per IEC 286-2: (Long Leads only) use suffix ZRLL • 1000 Piece Ammo Pack use suffix MALL PATENTED Refer to page 342 for LT-5TM holder information. 445 w w w. l i t t e l f u s e . c o m 0.57(.012") 8.45 (.333") ENVIRONMENTAL SPECIFICATIONS: Axial Lead and Cartridge Fuses Subminiature LT-5™ Fast-Acting Fuse 662 Series Average Time Current Curves 1000 100 10 TIME IN SECONDS 1 0.1 40mA 50mA 63mA 80mA 100mA 125mA 160mA 200mA 250mA 315mA 400mA 500mA 630mA 800mA 1A 1.25A 1.6A 2A 2.5A 3.15A 4A 5A 11 0.01 AXIAL LEAD AND CARTRIDGE FUSES 0.001 0.05 0.1 1 10 100 CURRENT IN AMPERES w w w. l i t t e l f u s e . c o m 446