16R700G

POLYFUSE® Resettable PTCs Radial Leaded > 16R Series 16R Series Description The 16R Series Radial Leaded device is designed to provide different products in the general applications with maximum 16 volts and a maximum 100-ampere short circuit rating. Features requirements Agency Approvals AGENCY AGENCY FILE NUMBER E183209 R50119318 Applications Electrical Characteristics Pd typ. (W) 1.0 2.3 2.4 2.6 2.8 3.0 3.0 3.3 3.6 3.7 4.2 4.6 Part Number I hold (A) 2.5 3.0 4.0 5.0 6.0 7 .0 8.0 9.0 10.0 11.0 12.0 14.0 I trip (A) 4.7 5.1 6.8 8.5 10.2 11.9 13.6 15.3 17 .0 18.7 20.4 23.8 V max (Vdc) 16 16 16 16 16 16 16 16 16 16 16 16 I max (A) 100 100 100 100 100 100 100 100 100 100 100 100 Current (A) 12.5 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 70.0 Time (Sec.) 5.0 1.0 1.7 2.0 3.3 3.5 5.0 5.5 6.0 7 .0 7 .5 9.0 R min (Ω) 0.0220 0.0380 0.0210 0.0150 0.0100 0.0077 0.0056 0.0047 0.0040 0.0037 0.0033 0.0026 R 1max (Ω) 0.0530 0.0975 0.0600 0.0340 0.0280 0.0200 0.0175 0.0135 0.0102 0.0089 0.0086 0.0064 X X X X X X X X X X X X X X X X X X X X X X X X 16R250G 16R300G 16R400G 16R500G 16R600G 16R700G 16R800G 16R900G 16R1000G 16R1100G 16R1200G 16R1400G I hold = Hold current: maximum current device will pass without tripping in 23°C still air. I trip = Trip current: minimum current at which the device will trip in 23°C still air. V max = Maximum voltage device can withstand without damage at rated current (Imax) I max = Maximum fault current device can withstand without damage at rated voltage (Vmax) Pd = Power dissipated from device when in the tripped state at 23°C still air. R min = Minimum resistance of device in initial (un-soldered) state. R 1max = Maximum resistance of device at 23°C measured one hour after tripping. Caution: Operation beyond the specified rating may result in damage and possible arcing and flame. ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. 117 Revised: April 3, 2009 16R Series 16R Series Maximum Time To Trip Resistance Agency Approvals POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Temperature Rerating Ambient Operation Temperature -40°C Part Number 16R250G 16R300G 16R400G 16R500G 16R600G 16R700G 16R800G 16R900G 16R1000G 16R1100G 16R1200G 16R1400G 3.7 4.4 5.9 7 .4 8.9 10.4 11.8 13.3 14.8 16.3 17 .7 20.7 3.3 4.0 5.3 6.6 8.0 9.3 10.6 12.0 13.3 14.6 15.9 18.6 2.9 3.5 4.7 5.9 7 .1 8.2 9.4 10.6 11.8 12.9 14.1 16.5 2.5 3.0 4.0 5.0 6.0 7 .0 8.0 9.0 10.0 11.0 12.0 14.0 -20°C 0°C 23°C 40°C Hold Current (A) 2.2 2.6 3.5 4.4 5.2 6.1 7 .0 7 .8 8.7 9.6 10.5 12.2 2.0 2.4 3.2 4.0 4.8 5.6 6.3 7 .1 7 .9 8.7 9.5 11.1 1.8 2.1 2.9 3.6 4.3 5.0 5.7 6.5 7 .1 7 .9 8.6 10.0 1.6 1.9 2.6 3.2 3.9 4.5 5.1 5.8 6.4 7 .0 7 .7 9.0 1.3 1.6 2.1 2.6 3.2 3.7 4.2 4.7 5.3 5.8 6.3 7 .4 50°C 60°C 70°C 85°C Average Time Current Curves 2.5 A 3.0 A 4.0 A 5.0 A 6.0 A 7.0 A 8.0 A 9.0 A 10.0 A 11.0 A 12.0 A 14.0 A Temperature Rerating Curve 170% 100 16R Percentage of Rated Current 150% 130% 110% 90% 70% 50% 30% 10 Time in Seconds 1 10% -40 -30 -20 -10 0 10 20 30 40 Temperature (°C) 50 60 70 80 0.1 0.01 1 10 100 1000 Current in Amperes The average time current curves and Temperature Rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application. 16R Series 118 Revised: April 3, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Soldering Parameters - Wave Soldering Refer to the condition recommended by the flux manufacturer. Temperature (°C) Pre-Heating Zone 260 220 Soldering Cooling Max. ramping rate should not exceed 4°C/ Sec. Max. solder temperature should not exceed 260°C Cooling by natural convection in air. Preheating 190 160 Soldering Zone Cooling Zone 0 60 min. 5 max. Time(s) Physical Specifications 2.5A: Tin-plated Copper clad Steel 3.0 - 14.0A: Tin-plated Copper Solderability per MIL–STD–202, Method 208E Cured, flame retardant epoxy polymer meets UL94V-0 requirements. Marked with ‘LF’, voltage, current rating, and date code. Environmental Specifications Operating/Storage Temperature Maximum Device Surface Temperature in Tripped State Passive Aging Lead Material Soldering Characteristics Insulating Material Device Labeling -40°C to +85°C 125°C +85°C, 1000 hours -/+ 5% typical resistance change +85°C, 85% R.H., 1000 hours -/+ 5% typical resistance change +85°C to -40°C 10 times -/+ 5% typical resistance change MIL–STD–202, Method 215F No change Level 1, J–STD–020C Humidity Aging Thermal Shock Solvent Resistance Moisture Resistance Level ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. 119 Revised: April 3, 2009 16R Series 16R Series POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Dimensions A E A E Part Marking System Single Sided Marking telfuse demark B 250G XXXX 16 B Voltage Rating Current Rating Date Code (Contact Littelfuse for additional information) D D C C Figure 1 Part Number 16R250G 16R300G 16R400G 16R500G 16R600G 16R700G 16R800G 16R900G 16R1000G 16R1100G 16R1200G 16R1400G A Figure 2 1 1 1 1 1 1 1 1 1 1 1 Inches Max. 0.35 0.28 0.35 0.41 0.42 0.44 0.50 0.55 0.65 0.69 0.69 0.93 mm Max. 8.90 7 .10 8.90 10.40 10.70 11.20 12.70 14.00 16.50 17 .50 17 .50 23.50 Figure 2 B Inches Max. 0.50 0.43 0.50 0.56 0.67 0.78 0.82 0.85 0.99 1.02 1.10 1.10 mm Max. 12.80 11.00 12.80 14.30 17 .10 19.70 20.90 21.70 25.20 26.00 28.00 27 .90 Inches Typ. 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.40 0.40 C mm Typ. 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 5.1 10.2 10.2 Min. 0.13 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 D Inches mm Min. 3.18 7 .6 7 .6 7 .6 7 .6 7 .6 7 .6 7 .6 7 .6 7 .6 7 .6 7 .6 Inches Max. 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 E mm Max. 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.00 3.50 3.50 Physical Characteristics Lead (dia) Inches 0.020 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.039 0.039 mm 0.51 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 1.00 1.00 Material Sn/CuFe Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu Sn/Cu 16R Series 120 Revised: April 3, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Part Ordering Number System 16 R 500 G PR PACKAGING STYLE BLANK: Bulk R: Tape & Ammo SERIES QUANTITY CODE: F=200 H=100 M=1000 D=1500 P=2000 U=500 TYPE: G (16VDC) I HOLD CURRENT CODE (SEE TABLE BELOW) R: RADIAL VOLTAGE RATING (VDC) Packaging Options Part Number 16R250G 16R300G 16R400G 16R500G 16R600G 16R700G 16R800G 16R900G 16R1000G 16R1100G 16R1200G 16R1400G Ordering Number 16R250GU 16R250GPR 16R300GU 16R300GPR 16R400GU 16R400GPR 16R500GU 16R500GPR 16R600GU 16R600GDR 16R700GF 16R700GMR 16R800GF 16R800GMR 16R900GF 16R900GMR 16R1000GF 16R1000GMR 16R1100GF 16R1100GMR 16R1200GH 16R1200GMR 16R1400GH I hold (A) 2.50 3.00 4.00 5.00 6.00 7 .00 8.00 9.00 10.00 11.00 12.00 14.00 I hold Code 250 300 400 500 600 700 800 900 1000 1100 1200 1400 Packaging Option Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Tape and Ammo Bulk Quantity 500 2000 500 2000 500 2000 500 2000 500 1500 200 1000 200 1000 200 1000 200 1000 200 1000 100 1000 100 Quantity & Packaging Codes U PR U PR U PR U PR U DR F MR F MR F MR F MR F MR H MR H ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. 121 Revised: April 3, 2009 16R Series 16R Series POLYFUSE® Resettable PTCs Radial Leaded > 16R Series Tape and Ammo Specifications Devices taped using EIA468-B/IE286-2 standards. See table below and Figure 1 for details. Dimensions Dimension EIA Mark IEC Mark Dim. (mm) Tol. (mm) Carrier tape width Hold down tape width: Top distance between tape edges Sprocket hole position Sprocket hole diameter* Abscissa to plane(straight lead) Abscissa to plane(kinked lead) Abscissa to top Overall width w/o lead protrusion Overall width w/ lead protrusion Lead protrusion Protrusion of cut out Protrusion beyond hold-down tape Sprocket hole pitch Device pitch: Pitch tolerance Tape thickness Tape thickness with splice Splice sprocket hole alignment Body lateral deviation Body tape plane deviation Ordinate to adjacent component lead* Ordinate to adjacent component lead* Lead spacing:16R250G-16R1100G Lead spacing:16R1200G-16R1400G *Differs from EIA specification W W4 W6 W5 D0 H H0 W W0 W2 W1 D0 H H0 18 11 3 9 4 18.5 16 45.0 56 57 -0.5 /+1.0 min. max. -0.5 /+0.75 -0.32 /+0.2 -/+ 3.0 -/+ 0.5 max. max. max. max. max. L1 L l2 P0 l1 L l2 P0 1.0 11 Not specified 25.4 25.4 20 consecutive. -/+ 0.5 -/+ 1 max. max. -/+ 0.3 -/+ 1.0 -/+ 1.3 -/+ 0.7 -/+ 0.7 -/+ 0.8 -/+ 0.8 t t1 t 0.9 2.0 0 Δh Δp P1 Δh Δp P1 0 0 3.81 7 .62 F F F F 5.08 10.18 Tape and Ammo Diagram Δh Δh Figure 1 Reference plane Δh Δp H1 L I2 L1 A1 F A B H0 W4 W5 W H1 C 1 H C2 P0 D0 Direction of unreeling Cross section A - B t 122 Revised: April 3, 2009 ©2009 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/series/16R.html for current information. 16R Series