P3100SCLRP

SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Series - DO-214 Description SIDACtor® Series DO-214AA are designed to protect baseband equipment such as modems, line cards, CPE and DSL from damaging overvoltage transients. The series provides a surface mount solution that enables equipment to comply with global regulatory standards. Features and Benefits Low voltage overshoot Agency Approvals AGENCY AGENCY FILE NUMBER Low on-state voltage Does not degrade with use Fails short circuit when surged in excess of ratings Low Capacitance E133083 Pinout Designation Not Applicable Schematic Symbol Applicable Global Standards TIA-968-A TIA-968-B ITU K.20/21 Enhanced Level* ITU K.20/21 Basic Level GR 1089 Inter-building* *A/B-rated parts require series resistance GR 1089 Intra-building IEC 61000-4-5 YD/T 1082 YD/T 993 YD/T 950 Electrical Characteristics VDRM @lDRM=5μA V min 6 15 25 58 65 75 90 120 140 170 180 190 220 275 320 6 15 25 58 VS @100V/μs V max 25 32 40 77 88 98 130 160 180 220 240 260 300 350 400 25 32 40 77 IH mA min 50 50 50 150 150 150 150 150 150 150 150 150 150 150 150 50 50 50 150 IS mA max 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 IT A max 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 VT @IT=2.2 Amps V max 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Capacitance @1MHz, 2V bias pF min 25 25 15 40 35 25 30 25 25 25 20 25 20 20 20 25 25 15 40 pF max 150 150 140 60 60 55 50 45 40 35 35 35 35 35 35 150 150 140 80 Part Number P0080SALRP P0220SALRP P0300SALRP P0640SALRP P0720SALRP P0900SALRP P1100SALRP P1300SALRP P1500SALRP P1800SALRP P2100SALRP P2300SALRP P2600SALRP P3100SALRP P3500SALRP P0080SBLRP P0220SBLRP P0300SBLRP P0640SBLRP Marking P-8A P22A P03A P06A P07A P09A P11A P13A P15A P18A P21A P23A P26A P31A P35A P-8B P22B P03B P06B Table continues on next page. © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 138 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Parameters (continued) VDRM @lDRM=5μA V min P0720SBLRP P0900SBLRP P1100SBLRP P1300SBLRP P1500SBLRP P1800SBLRP P2100SBLRP P2300SBLRP P2600SBLRP P3100SBLRP P3500SBLRP P0080SCLRP P0220SCLRP P0300SCLRP P0640SCLRP P0720SCLRP P0900SCLRP P1100SCLRP P1300SCLRP P1500SCLRP P1800SCLRP P2100SCLRP P2300SCLRP P2600SCLRP P3100SCLRP P3500SCLRP P07B P09B P11B P13B P15B P18B P21B P23B P26B P31B P35B P-8C P22C P03C P06C P07C P09C P11C P13C P15C P18C P21C P23C P26C P31C P35C 65 75 90 120 140 170 180 190 220 275 320 6 15 25 58 65 75 90 120 140 170 180 190 220 275 320 VS @100V/μs V max 88 98 130 160 180 220 240 260 300 350 400 25 32 40 77 88 98 130 160 180 220 240 260 300 350 400 IH mA min 150 150 150 150 150 150 150 150 150 150 150 50 50 50 150 150 150 150 150 150 150 150 150 150 150 150 IS mA max 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 IT A max 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 VT @IT=2.2 Amps V max 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Capacitance @1MHz, 2V bias pF min 35 35 30 25 25 25 20 25 20 20 20 45 30 25 55 50 45 45 40 35 35 30 30 30 30 25 pF max 75 70 70 60 55 50 35 50 45 45 40 260 240 250 155 150 140 115 105 95 90 90 80 80 70 65 Part Number Marking Notes: - Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted). - Devices are bi-directional. Surge Ratings Series IPP 0.2x310 1 0.5x700 2 A min A B C Notes: 1 Current waveform in μs 2 Voltage waveform in μs - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP - The device must initially be in thermal equilibrium with -40°C < TJ < 2x10 1 2x10 2 A min 150 250 500 8x20 1 1.2x50 2 A min 150 250 400 10x160 1 10x160 2 A min 90 150 200 10x560 1 10x560 2 A min 50 100 150 5x320 1 9x720 2 A min 75 100 200 10x360 1 10x360 2 A min 75 125 175 10x1000 1 10x1000 2 A min 45 80 100 5x310 1 10x700 2 A min 75 100 200 ITSM 50/60 Hz A min 20 25 30 di/dt Amps/μs max 500 500 500 20 25 50 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 139 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Thermal Considerations Package DO-214AA Symbol TJ TS R0JA Parameter Operating Junction Temperature Range Storage Temperature Range Thermal Resistance: Junction to Ambient 90 Value Unit °C °C °C/W V-I Characteristics +I tr x td Pulse Waveform tr = r ise time to peak value td = decay time to half value IPP – Peak Pulse Current – %IPP IT IS IH IDRM -V VT VDRM VS +V 100 Peak Value Waveform = tr x td 50 Half Value 0 0 -I tr td t – Time (μs) Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 2.0 14 Percent of VS Change – % 12 10 8 6 4 2 0 -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 IH (TC = 25ºC) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 20 40 60 80 100 120 140 160 IH 25 °C 25°C Junction Temperature (TJ) – °C Ratio of Case Temperature (TC) - ºC © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 140 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pb-Free assembly (see Fig. 1) Figure 1 TP Ramp-up tP Critical Zone TL to TP Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) 60-180 secs. 3°C/sec. Max. 3°C/sec. Max. 60-150 secs. Temperature Average ramp up rate (Liquidus Temp (TL) to peak) TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Temperature (tL) TL TS(max) Preheat tL Ramp-down TS(min) tS Peak Temp (TP) Time within 5°C of actual Peak Temp (tp) Ramp-down Rate Time 25°C to Peak Temp (TP) Do not exceed 30 secs. Max. 6°C/sec. Max. 8 min. Max. 25 time to peak temperature (t 25ºC to peak) Time Physical Specifications Lead Material Terminal Finish Body Material Copper Alloy 100% Matte-Tin Plated Environmental Specifications High Temp Voltage Blocking 80% Rated VDRM (VAC Peak 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 52 VDC JEDEC, JESD22-A-101 JEDEC, JESD22-A-101 -65°C, 1008 hrs. 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 JEDEC, JESD22-A-102 Temp Cycling UL recognized epoxy meeting flammability classification 94V-0 Biased Temp & Humidity High Temp Storage Low Temp Storage Thermal Shock Autoclave (Pressure Cooker Test) Resistance to Solder Heat Moisture Sensitivity Level Part Numbering Part Marking P xxx 0 S x L RP TYPE P = SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKAGE TYPE REEL PACK RoHS COMPLIANT IPP RATING Pxxx xxxxx Part Marking Code (Refer to Electrical Characteristics Table) Date Code © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 141 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions — DO-214AA Case Temperature Measurement Point CA 0.079 (2.0) Pad Outline 0.079 (2.0) B D Dimensions A Inches Min 0.130 0.201 0.077 0.159 0.030 0.075 0.002 0.077 0.006 Millimeters Min 3.30 5.10 1.95 4.05 0.75 1.90 0.05 1.95 0.15 Max 0.156 0.220 0.087 0.181 0.063 0.096 0.008 0.104 0.016 Max 3.95 5.60 2.20 4.60 1.60 2.45 0.20 2.65 0.41 0.110 (2.8) inch (millimeter) B C D E F G H K H E F K G Packing Options Package Type S Description DO-214AA Tape & Reel Pack Quantity 2500 Added Suffix RP Industry Standard EIA-481-D Tape and Reel Specification — DO-214AA 0.157 (4.0) 0.472 (12.0) 0.36 (9.2) 0.315 (8.0) 12.99 (330.0) 0.059 DIA (1.5) Cover tape 0.512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters). 0.49 (12.4) Direction of Feed © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 142 Revised: February 22, 2011