SODJ30A-SH

SODJ***(C)A-SH SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR 200 Watt Peak Pulse Power Features * * * * * * * For surface mounted applications in order to optimize board space Low profile package Excellent clamping capability IEC61000-4-2 ESD 15kV Air,8kV contact compliance Protects one I/O line Lead-free parts meet RoHS requirments Suffix "-SH" indicates Halogen-free part, ex.SODJ5.0A-SH. Applications * * * * Personal digital assistants (PDA) Cellular handsets & Accessories Portable devices Portable instrumentation * Handhelds and notebooks We declare that the material of product is * Digital cameras Haloggen free (green epoxy compound) Mechanical data * Epoxy : UL94-V0 rated flame retardant * Case : Molded plastic, SOD123-FL/MINI SMA * Terminals :Plated terminals, solderable per MIL-STD-750,Method 2026 * Polarity : Indicated by cathode band; Bidirectional without color band. * Mounting Position : Any * Weight :15mg 1.Maximum ratings and Electrical Characteristics (AT T =25 AoC unless otherwise noted) SYMBOL VALUE Peak Power Dissipation at TA=25°C, TP=1ms(Note 1) PPPM Minimum 200 Watts Steady State Power Dissipation at TL=75°C(Note 2) PM(AV) 0.5 Watts IFSM 20 Amps Operating Temperature Range TJ , -55 to +150 °C Storage Temperature Range TSTG -55 to +150 °C PARAMETER Peak Forward Surge Current, 8.3ms Single Half Sine-wave Unidirectional Only, Superimposed on Rated Load(JECED Method) (Note 3) UNITS NOTES: 1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2. 2. 8.0mm2 (.013mm thick) land areas 3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. Leshan Radio Company, LTD. Rev.K May. 2021 1/4 SODJ***(C)A-SH UNIDIRECTIONAL PART NUMBER SODJ5.0A-SH SODJ6.0A-SH SODJ6.5A-SH SODJ7.0A-SH SODJ7.5A-SH SODJ8.0A-SH SODJ8.5A-SH SODJ9.0A-SH SODJ10A-SH SODJ11A-SH SODJ12A-SH SODJ13A-SH SODJ14A-SH SODJ15A-SH SODJ16A-SH SODJ17A-SH SODJ18A-SH SODJ20A-SH SODJ22A-SH SODJ24A-SH SODJ26A-SH SODJ28A-SH SODJ30A-SH SODJ33A-SH SODJ36A-SH SODJ40A-SH SODJ43A-SH SODJ45A-SH SODJ48A-SH SODJ51A-SH SODJ54A-SH SODJ58A-SH SODJ60A-SH SODJ64A-SH SODJ70A-SH SODJ75A-SH SODJ78A-SH SODJ85A-SH SODJ90A-SH SODJ100A-SH SODJ110A-SH SODJ120A-SH SODJ130A-SH SODJ150A-SH SODJ160A-SH SODJ170A-SH SODJ180A-SH BidirectionalDIRECTIONAL PART NUMBER SODJ5.0CA-SH SODJ6.0CA-SH SODJ6.5CA-SH SODJ7.0CA-SH SODJ7.5CA-SH SODJ8.0CA-SH SODJ8.5CA-SH SODJ9.0CA-SH SODJ10CA-SH SODJ11CA-SH SODJ12CA-SH SODJ13CA-SH SODJ14CA-SH SODJ15CA-SH SODJ16CA-SH SODJ17CA-SH SODJ18CA-SH SODJ20CA-SH SODJ22CA-SH SODJ24CA-SH SODJ26CA-SH SODJ28CA-SH SODJ30CA-SH SODJ33CA-SH SODJ36CA-SH SODJ40CA-SH SODJ43CA-SH SODJ45CA-SH SODJ48CA-SH SODJ51CA-SH SODJ54CA-SH SODJ58CA-SH SODJ60CA-SH SODJ64CA-SH SODJ70CA-SH SODJ75CA-SH SODJ78CA-SH SODJ85CA-SH SODJ90CA-SH SODJ100CA-SH SODJ110CA-SH SODJ120CA-SH SODJ130CA-SH SODJ150CA-SH SODJ160CA-SH SODJ170CA-SH SODJ180CA-SH REVERSE STAND-OFF VOLTAGE VRWM (V) 5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 180 BREAKDOWN BREAKDOWN VOLTAGE VOLTAGE VBR (V) VBR (V) MIN. @IT MAX. @IT 6.4 7 6.67 7.37 7.22 7.98 7.78 8.6 8.33 9.21 8.89 9.83 9.44 10.4 10 11.1 11.1 12.3 12.2 13.5 13.3 14.7 14.4 15.9 15.6 17.2 16.7 18.5 17.8 19.7 18.9 20.9 20 22.1 22.2 24.5 24.4 26.9 26.7 29.5 28.9 31.9 31.1 34.4 33.3 36.8 36.7 40.6 40 44.2 44.4 49.1 47.8 52.8 50 55.3 53.3 58.9 56.7 62.7 60 66.3 64.4 71.2 66.7 73.7 71.1 78.6 77.8 86 83.3 92.1 86.7 95.8 94.4 104 100 111 111 123 122 135 133 147 144 159 167 185 178 197 189 209 198 221 TEST CURRENT IT (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 MAXIMUM CLAMPING VOLTAGE @IPP VC (V) 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 291 REVERSE LEAKAGE @VRWM IR (uA) 400 400 250 100 50 25 10 5 2.5 2.5 2.5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Marking Code IPPM (A) 0.8 0.7 0.7 Uni KE KG KK KM KP KR KT KV KX KZ LE LG LK LM LP LR LT LV LX LZ ME MG MK MM MP MR MT MV MX MZ NE NG NK NM NP NR NT NV NX NZ PE PG PK PM PP PR PT Bi AE AG AK AM AP AR AT AV AX AZ BE BG BK BM BP BR BT BV BX BZ CE CG CK CM CP CR CT CV CX CZ DE DG DK DM DP DR DT DV DX DZ EE EG EK EM EP ER ET EV 21.7 19.4 17.9 16.7 15.5 14.7 13.9 13 11.8 11 10.1 9.3 8.6 8.2 7.7 7.2 6.8 6.2 5.6 5.1 4.8 4.4 4.1 3.8 3.4 3.1 2.9 2.8 2.6 2.4 2.3 2.1 2.1 1.9 1.8 1.7 1.6 1.5 1.4 1.2 1.1 1.0 1.0 0.8 SODJ190A-SH SODJ190CA-SH 190 209 233 1 307 1 0.7 PV SODJ200A-SH SODJ200CA-SH 200 220 246 1 324 1 0.6 PX EX SODJ220A-SH SODJ220CA-SH 220 246 272 1 356 1 0.56 PY EY Leshan Radio Company, LTD. Rev.K May. 2021 2/4 SODJ***(C)A-SH 2.Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig. 1-Peak Pulse Power Rating Curve Fig. 2-Power Derating Curve PPPM, Peak Pulse Power,KW 100 Non-Repetive Pulse Waveform Shown in Fig.3 TA=25°C 10 5.0~91A 100A~300A 1.0 0.1 0.1 1.0 10 100 td,Pulse Width,μsec 1000 10000 Fig. 4-Typical Junction Capacitance Unidirectional Fig. 3-Pulse Waveform 10000 tf=10μs 100 Peak Value Ippm TA=25℃ Test Waveform tf=10μs td=1000μs Cj, Capacitance,pF IPPM, Peak Pulse Current % 150 10/1000μs Waveform as deffused by R.E.A 50 Half Value Ipp/2=td 0 meansured at stand-off voltage VWM 1000 Uni-Directional 100 Bi-Directional 10 0 100 1.0 2.0 3.0 t,Time,ms 1.0 10 100 V(WM),Reverse Stand-off Voltage,Voltage Fig. 6-Maximum Non-Repetitive Peak Forward Surge Current Uniderictional Fig 5. –typical transient thermal impedance IFSM, Forward Surge Current,Amperes C/W) Transient thermal impedance( ° TJ = 25°C f = 1.0 MHz Vsig = 50mVp-p 10 1.0 0.1 0.01 0.1 1.0 10 t,Pulse duration,sec Leshan Radio Company, LTD. 100 Rev.K May. 2021 100 TJ = TJ max 8.3ms Single Half Sine-wave (JEDEC Method) 10 1 10 Number of Cycles At 60 Hz 100 3/4 3. dimension: SOD123FL DIM MIN NOR MAX A 0.90 1.05 1.15 b 0.75 0.80 0.95 L 0.50 0.80 1.10 E 2.60 2.75 2.90 D 1.60 1.75 1.90 HE 3.50 3.65 3.80 c 0.12 0.17 0.22 L1 0.25 0.45 0.65 All Dimensions in mm Suggested solder pad layout DIM X Y X1 Leshan Radio Company, LTD. Rev.K May. 2021 (mm) 1.20 1.10 2.00 4/4 DISCLAIMER ● Before you use our Products, you are requested to carefully read this document and fully understand its contents. LRC shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any LRC’s Products against warning, caution or note contained in this document. ● All information contained in this document is current as of the issuing date and subject to change without any prior notice. Before purchasing or using LRC's Products,please confirm the latest information with a LRC sales representative. Title: Power Packages Product Packing Specification 功率产品包装规范 Document Number: APS-QA-QS-009 Proprietary Information Revision C Page 3 of 6 8.1.2 Label position and QA stamp position.(Empty area) 标签张贴位置及QA印章位置。（印章盖 标 签空白区 静电敏感器件标识 7英寸卷盘标签张贴及QA印章位置 13英寸卷盘标签张贴及QA印章位置 8.1.3 Ensure direction In the same reel. The same steel coil plate direction，With antistatic bubble to package reel。Refer to the below picture. 同一箱内的卷盘方向一致,用防静电泡沫对卷盘进行包裹。 7英寸卷盘防静电泡沫包裹 13英寸卷盘防静电泡沫包裹 Do not copy without written permission from Advanced Power Semiconductor Title: Power Packages Product Packing Specification 功率产品包装规范 Document Number: APS-QA-QS-009 Proprietary Information Revision C Page 4 of 6 8.1.4 Put in the antistatic packing box after packaged reels. And QA stamp on the box label . 将包装好的卷盘放入防静电纸箱中，并 盒标签上盖章。 7 英寸卷盘内盒及标签 8.1.5 Product use printing inner box. 13 英寸卷盘内盒及标签 产品使用LRC印字内箱。 印字内盒 印字内盒 7英寸卷盘内箱印字（侧面） 13英寸卷盘内箱印字（正面） 8.1.6 Inner box packing quantity requirement.内盒包装数量要求。 Product Description QTY SOD123-FL 1-10Reels SOD323-HE 1-10Reels SMA-FL 1-7Reels SMB-FL 1-4Reels 8.1.7 With transparent tape sealing. 透明胶带封箱。 Do not copy without written permission from Advanced Power Semiconductor Title: Power Packages Product Packing Specification 功率产品包装规范 Document Number: APS-QA-QS-009 Proprietary Information Revision C Page 5 of 6 7英寸内箱封盒 13英寸内箱封盒 8.1.8 Outer box size and packing quantity requirement,外箱尺寸及包装数量要求。 Product Description 卷盘尺寸 Height（H） Width（W） Length（L） Max. Qty Power Device 7 英寸 410mm 400mm 445mm 12 Power Device 13 英寸 410mm 400mm 445mm 5 统一方向 7 英寸卷盘产品装箱 13 英寸卷盘产品装箱 Do not copy without written permission from Advanced Power Semiconductor Title: Power Packages Marking & Taping Specification 功率封装字模和编带规范 Proprietary Information Document Number:APS-QA-QS-010 Revision C Page 6 of 9 8.2 Standard Products Taping Specification 标准产品编带规范 8.2.1 Tape length of no component 空带长度说明 Taping leader length 引导部分：440mm±40mm ，Tape trailer 尾部：200mm±40mmt 160mm-240mm 400mm-480mm TAPE LEADER 8.2.2 Component packaging orientation: The cathode lead is close to the carrier tape’s index hole. 产品放置方向：印阴极带引脚邻近载带索引孔 Do not copy without written permission from Advanced Power Semiconductor Title: Power Packages Marking & Taping Specification 功率封装字模和编带规范 Proprietary Information Document Number:APS-QA-QS-010 Revision C Page 7 of 9 8.2.3 Tape enwind orientation 编带缠绕方向要求 Do not copy without written permission from Advanced Power Semiconductor