KW3-561CS

KW3-561 SERIES LED Numeric Display Three Digit (0.56") DESCRIPTION: The KW3-561 series is 0.56 inch (14.20mm) height three digit display with right DPs designed for viewing distances of up to seven meters. This series is suitable for use in industrial controls, consumer products and instrument panels. All devices are available as either common anode or common cathode. PACKAGE DIMENSIONS 10.0 o 8.10 1.35 1.45 14.20(.56") 19.00 DIG.1 DIG.2 F E D DIG.3 A G B C DP + PIN 1. 12.70 37.60 8.00 12.70 ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100µA Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect. o φ0.5 15.24 2.54*5=12.70 INTERNAL CIRCUIT DIAGRAM 12 DIG.1 9 DIG.2 8 DIG.3 A B C D E F G DP A B C D E F G DP A B C D E F G DP 6 NO CONNECT 11 7 4 2 1 10 5 3 TESTING CONDITION FOR EACH PARAMETER : Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf λρ ∆λ Ir Iv Unit V nm nm µA µ cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA 12 DIG.1 9 DIG.2 8 DIG.3 A B C D E F G DP A B C D E F G DP A B C D E F G DP 6 NO PIN 11 7 4 2 1 10 5 3 PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chip Part No. Raw Material GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Emitted Color Hi-Eff. Red Super Red Green Super Green Yellow Hi-Eff Red Super Red Common KW3-561C2 KW3-561CG KW3-561C6 Green Cathode Super Green Yellow 570 585 30 30 100 100 50 50 100 100 1.7 1.7 2.2 1.9 2.6 10-20 850 2.6 10-20 700 2200 1600 565 30 100 50 100 1.7 2.2 2.6 10-20 750 2000 Common Anode C.C or C.A Wave Length λρ (nm) 635 660 565 570 585 635 660 Absolute Maximum Ratings ∆λ Pd If Electro-optical Data(at 10mA) o If If Vf (V) Iv (µcd) (Peak) Per Segment (Rec) Per Segment (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 45 20 30 30 30 45 20 100 100 100 100 100 100 100 50 50 50 50 50 50 50 100 100 100 100 100 100 100 1.7 1.5 1.7 1.7 1.7 1.7 1.5 1.9 1.9 2.2 2.2 1.9 1.9 1.9 2.6 10-20 750 2000 KW3-561A3 KW3-561AS KW3-561A2 KW3-561AG KW3-561A6 KW3-561C3 KW3-561CS 2.6 10-20 5600 21000 2.6 10-20 750 2.6 10-20 850 2.6 10-20 700 2.6 10-20 750 2000 2200 1600 2000 2.6 10-20 5600 21000 REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).